Our Products
Automobile Repair Tools & Equipment
1 Products availableControl Panels
1 Products availableIndustrial Ovens & Furnaces
1 Products availableMeasuring Instruments & Equipment
1 Products availableOur product range contains a wide range of Computerized Universal Testing Machine, Computerized Tensile Testing Machine, Chain testing machine, Digital Spring Testing Machine and Digital Impact Testing Machine
In today's days of automation, existing mechanical dial type Universal Testing Machines are getting obsolete. More ever it takes plenty of time for testing. Plotting of graph required test in different units is still difficult. Evaluation of important Parameters like proof stress. Young's modulus is very tedious and time consuming.
Up gradation package :
Microprocessor based control Unit
For hydraulic Machines preseure cell is used
For Screw drivern machines load cell used
Cross head displacement measured by rotary encoder
For Screw driven machine DC/AC servo drives are used
Measuring system with eletronic Control panel:
MCS-MP is a state of the art micro processor based unit specially designed for Universal Testing Machines with digital display of Load and Displacement / Extension.
Evaluating Proof Stress : Electronic Extensorneter :MCE 2 is a strain gauge type, extensometer to measure material extension with a resolution of 1 micron. It is designed to be clamped directly on specimen. This is used to measure strain up to elastic limit to determine important parameters like 1% to 1% proof stress and Young's modulus, MCE 2 has two fixed gauge lengths of 25mm and 50 mm. Change of gauge length is by means of replacing button knife-edge extender, MCE 2 is fabricated from high strength fight weight aluminium with a durable anodized finish. The knife-edges are made from oil hardened tool steel to withstand heavy usage. Supports maximum dia of 40mm & maximum extension 2mm Panel Control Mode:Micro processor panel works independently. It shows load, disp. and extension on control panel. It has membrane keyboard or data entry. All specimen related parameters can be entered In to the control panel. At the end of the test one can entered see all test results on front penal display. Load vs Disp. graph can be directly obtained on dot matrix printer. Servo Control System for UTM with Stepper :MCS has developed unique system Io add servo control facility to UTM. The system contains following.Motorised servo valve with following items :Hydraulic loading valveStepper motor, capacity 20 kg-cmPower card for stepper motorWindows based software for controlling servo valveMCS Make Centrol box with Auto / Manual selectionPotentiometer for operating valve in manual mode Every UTM has manually operated hydraulic valve. which controls rate of loading. It is very difficult to achieve required rate of loading manually. Due to stringent testing requirements, it is required to conduct tests at specified load rate or strain rate. MCS has developed servo system where above loading valve is converted into a motorized valve by using stepper motor. A special windows based software controls this valve and the operation of the machine. Servo Controlled operation :There are two models fo operation. In manual control moe, the machine is operated by means of potentiometer provided on control box. Here, no rate control is offered. The machine is operated by means of potentiometer in similiar ways as we operate hydraulic valve. In auto control mode, operator enters required load / Disp / Strain rate on computer. When we start the test, the required rate is always compared with achieved rate and error feedback controls machine accurately. Following rate control modes are available :Load rate control : 1 kN to 10 kN per secDisplacement rate control : .01 mm to 1 mm per sec.Strain rate control : 0.001% to 0.01 % per sec. (strain rate control is possible only with extensometer)Servo Control with MOOG Valve:Instead of stepper motor, a MOOG valve can be used for precise load rate control |
Features :Front loading crossheads with easy grip changingHyraulic grippingServo control for load / strain rate controlManual as well as computer control
|
|
|
Model | TNE 5 | TNE 10 | TNE 20 | TNE 50 | TNE 100 | |||||||||
Maximum Test load | 5 kN | 10 kN | 20kN | 50 kN | 100 kN | |||||||||
Load Measurement | By means of exchangeable strain gauge based load cell. | |||||||||||||
Load Measuring Range and Accuracy | + 1 % on indicated load from 2 % to 100 % of load capacity. | |||||||||||||
Maximum Crosshead Stroke | 1000 mm without load cell & grips. | |||||||||||||
Distance between Columns | 450 mm | |||||||||||||
Drive System Option - DD with DC drive | 1:10speed ratio 5 - 50 mm / min, 25 - 250 mm/min, 50 - 500 mm/ min (Any other speed range available on request) | |||||||||||||
Drive System Option - SD with servo drive | 0.5 mm to 500 mm/min {Any other speed range available on request) | |||||||||||||
Power Supply | 230 V AC/50Hz, 1 Ph | 415 V AC/50Hz, 3 Ph | ||||||||||||
Measuring System Microprocessor Panel Crosshead Display Resolution Load range & Resolution | Model MCS-MP 0.1 mm by means of rotary encoder 1 /10000 from 0-40 %of range and 1 / 4000 from 40-100% of range | |||||||||||||
|
Machine Features :Computer controlled mechanism under windows 2000/XPVariable speed drive with DC / AC servo drive options.Automatic identification and interchangeability of load cells.Different clamping devices to suit specific test requirement.Safety interlock by end limit switches and by overload sensing.
|
Model | TNE 5 | TNE 10 | TNE 20 | TNE 50 | TNE 100 | |||||||||
Maximum Test load | 5 kN | 10 kN | 20kN | 50 kN | 100 kN | |||||||||
Load Measurement | By means of exchangeable strain gauge based load cell. | |||||||||||||
Load Measuring Range and Accuracy | + 1 % on indicated load from 2 % to 100 % of load capacity. | |||||||||||||
Maximum Crosshead Stroke | 1000 mm without load cell & grips. | |||||||||||||
Distance between Columns | 400 mm | |||||||||||||
Drive System Option - DD with AC drive |
1:20speed ratio 5 - 100 mm / min, 25 - 500 mm/min, 50 - 500 mm/ min (Any other speed range available on request) |
|||||||||||||
Drive System Option - SD with servo drive | 0.5 mm to 500 mm/min {Any other speed range available on request) | |||||||||||||
Power Supply | 230 V AC/50Hz, 1 Ph | 415 V AC/50Hz, 3 Ph | ||||||||||||
Measuring System Microprocessor Panel Crosshead Display Resolution Load range & Resolution |
Model MCS-MP 0.1 mm by means of rotary encoder 1 /10000 from 0-40 % of range and 1 / 4000 from 40-100% of range |
|||||||||||||
|
The machine is designed to carry out compression tests on materials like concrete, cement as well as finished products like tiles, bricks, blocks and other relevant materials. The machine can be used for quality control departments, civil test laboratories, engineering colleges And are adeally suitable for on-site testing for quality control and/or laboratories.
We Upgrade all types of imported testing machines like INTRON, ZWICK, TIRA, HONSFIELD, UNITED and Indian like FIE, FSA, STAR etc, with following advantages :-Machine becomes computerized with digital load indication in kg / N / Mpa with real time graph on PCAvoids tedious evaluation of proof stress. Gives 0.1 - 1% proof stress values & stress / stress graphPlot of Load vs % elongation for elastic materials for rubber / plastic using our Long Travel ExtmeterHighly accurate. No manual Intervention. Totally error free working.Mechanical working ( with dial ) of machine remains unchanged and can still be used.
Why MCS make Universal Testing Machines? :-Up to date knowledge of all the latest Indian & International testing standards and ability to implement in the machines / software supported bystrong in-house R&D setup.Future proof indigenously designed hardware/software, sensors, extensometer, control panelState of the art manufacturing facilities supported by excellent after sales supportInstalled our systems / packages in more than 40 NABL accredited Laboratories in India. We supply testing machines for testing of materials like steel, cement, copper & ACSR conductors, cables, polymers, rubber, insulators, ceramic, glass, plywood, fastners, wire / nylon ropes. We look forward to have an opportunity to serve your company in near future.
Technical Specification :-Automatic Compression Testing Machine ( ACTM )Computer-controlled using EIA-485 communication standard. Online plotting of runs being taken by the ACTM Advanced data acquisition, analysis and report generation ACTM software tool with run database management.
Digital Display Unit ( DPU )Dynamic display of pace-rate on a LED bar-graph for monitoring the quality of control. On-board memory for storing up to 250 runs. Auto-shutdown when the sample breaks or the maximum load is achieved. Independent LVDT attachment.
Micro-Controlled CTM ( CTM )Intelligent DSP-based Pace Rate Controller. Digital PID feed back control with high torque stepper motor as an actuator. Fully configurable feedback control parameters. Automatic Load Hold and Resume facility. Facility for user-defined pace rate in kN / mm.
User InterfaceFront panel LCD for status & menu displays. 4-digit indicator for load (kN) & strain (mm) display selectively. LED Bar graph for pace rate quality monitoring. 8-button front panel keypad.
Hardware FeaturesAccurate pace rate control through DSP-based feedback.Data integrity & validation facility for calibration data. Precision pressure & strain sensing using 16-bit ADCs. Rugged military-grade back panel connectors suited for demanding on-site conditions. EIA-485 to EIA-232 converter module.
Data AcquisitionOnline run data acquisition & plotting. Advanced Graphical User Interface. Multiple logins & selective access control.
CTM models comparison chart. Analysis and Report Generation
Key Features | ACTM | microCTM | DPU |
Computer Interface | Yes | No | No |
Pace Rate Control | Automatic | Automatic | Manual |
RS485 Interface | Yes | No | No |
Release Valve Control | Automatic | Manual | Manual |
Printer Connections | Yes | Yes | Yes |
LVDT | Yes | Yes | Yes |
Flexure | Yes | Yes | Yes |
Split Tensile | Yes | Yes | Yes |
Stress Control | Yes | Yes | Yes |
Motorised Rockwell Systems Hardness Testers - Model RASN (M)Suitable for Rockwell TestsMotorised for automatic operation cycie e load/unloadPreliminary Test Force - 98 07N (10kgf)Addition. Test Force - 490.3, 882.6, 1373N (150, 90, 140kgf)Total Test Force - 588.4, 980.7, 1471NTest force selection by external dialing, Auto zero setting dial gauge | |
Rockwell Systems Hardness Testers - Model RASNSuitable for Rockwell TestManually OperatedPreliminary Test Force- 98.07, (10kgf)Additional test force - 490.4, 882.6, 137N, (50, 90, 140 kgf)Total Force Selection by external dailingAuto zero setting dial gauge Rockwell Cum Brinell Testers - Model RASN (B)Same as RASN above, in additionalAdditional Test Force - 1471, 2354 N, (177.5, 250 kgf)Total Test Force - 1839, 2452 N, (187.5, 250 kgf) | |
Rockwell cum Rockwell Superficial Hardness Testers - Model RASN (T)Suitable for Rockwell & Rockwell superficial testsManually operatedPreliminary test force - 29.42, 98.07 N, (3.10 kgf)Additional test force - 177.7, 264.8, 411.9, 490.3, 882.8, 1373 N, (12.27, 42.50 & 140 kgf)Total test force - 147.1, 294.2, 441.3, 588.4, 980.7, 147 N, (15, 30, 45, 60, 100, 150 kgf)Auto zero setting dial gauge | |
Motorised Digital Hardness Testers - Model RASN (E)Digital Hardness Tester for Rockwell testsMotorised for automatic operation cycle ie. load / unloadPreliminary test force - 98.07 N, (10kgf)Additional test force - 490.3, 882.6, 1373 N, (50, 90, 140 kgf)Total test force - 588.4, 980.7, 1471 N, (60, 100, 150 kgf)Test force selection by external dialingSet position with LED bar indicator for easy operationKey board entry through reliable membrane switches for scale / GO-NOGO/ dwell time selectionLarge size scale display for easy reading with 0.1 Rockwell resolutionParallel output for connection bot matrix printer to get result indication serial number of sets, Hardness scale, Hardness value and high / good / low indication. |
'MCS'new'RASN'series of Hardness Testing Machines come with much improved design and look with following major design changes
The machine body is having a taper front look and a big size dial gauge in the front. The machine is powder coated for far better look. The paint shade do not fade and machine looks like new over year.
The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0.05 mm when raised to full height The accuracy is retained for years together due to hardened bush
A hardened and ground stepped bush is fixed on top of main screw for location and test surface. This guarantees no change in results due to rough handling of test table or test piece. It means a trouble free long life machine accuracy.
An antifrication linear bearing with almost no clearance is provided for a perfect vertical movement of loading plunger with minimum friction This enables testing of small dia pin or ball upto 3 mm dia.
All machine models are provided with automatic zero setting dial gauge or digital readout. Hence zero setting at every test is avoided.
All four models confirm to respective standard as under
IS:3804, BS 10109-2 & ASTM E-18 for Rockwen Test
IS:5073 BS 10189-2 & ASTM E-18 for Rockwell Superficial Test
IS:2281 BS 10003- 2 & ASTME - 10 for Brinell Test
Optional Accessories :Steel Ball Indentor 1/8", 1/4", 1/2"Testing Table 200mm diaTesting Table 70mm dia with "V" groove for round jobs 10 to 80mmVan -Rest to support odd shaped jobsJominy test fixture for end quench testGooseneck Adaptor No.1Special Diamond lndentor suitable for Gooseneck Adaptor No.1Short nib diamond lndentor suitable for Gooseneck Adaptor No.1Gooseneck adaptor No.2Special Diamond Cylinder anvil for testing by jobs above 20mm dia.Everyball anvil with 25.4 dia or 38mm dia ballGooseneck anvil for pipes 5 to 25mm ID with 5mm step insertsJack rest for long and heavy jobsDot matrix Pnnter for Model RASN (E) | ||
Model | RASN | RASN (B) | RASN (T) | RASN (M) | RASN (E) |
Testing Table 50mm dia | 1 | 1 | 1 | 1 | 1 |
Testing Table 38mm dia with 'V' groove for round jobs 6-45mm dia. |
1 | 1 | 1 | 1 | 1 |
Diamond lndentor - Rockwel | 1 | 1 | 1 | 1 | 1 |
Steel Ball lndentor 1/16" with 5 spare balls | 1 | 1 | 1 | 1 | 1 |
Steel Ball Indentor 2.5mm with 5 spare balls | - | 1 | - | - | - |
Test Block Rockwell 'C' | 1 | 1 | 1 | 1 | 1 |
Test Bock Rockwell 'B' | 1 | 1 | 1 | 1 | 1 |
Test Block HB 2.5/187.5 | - | 1 | - | - | - |
Test Block HR 30 N | - | - | 1 | - | - |
Allen Soarers | 5 | 5 | 5 | 5 | 5 |
Screw Drive | 1 | 1 | 1 | 1 | 1 |
Clamping Device | 1 | 1 | 1 | 1 | 1 |
Dash Pot Oil | 1 Bottle | 1 Bottle | 1 Bottle | - | - |
Wooden Box for Std. Acessones | 1 | 1 | 1 | 1 | 1 |
Telescopic Sleeves for Elavating screw protection | 1 Set | 1 Set | 1 Set | 1 Set | 1 Set |
Spare Fuse 1 Amp | - | - | - | 1 | 1 |
Power cable | - | - | - | 1 | 1 |
Brinell Microscope | - | 1 | - | - | - |
Machine cover | 1 | 1 | 1 | 1 | 1 |
Instruction Manual | 1 | 1 | 1 | 1 | 1 |
Technical Data :
Model | Unit | RASN | RASN (B) | RASN (T) | RASN (M) | RASN (E) |
Major Load | N kgf |
588.4, 980.7, 1471 (60, 100, 150) |
588.4, 980.7, 1471, 1839, 2452 (60, 100, 150, 187, 5.250) |
147.1, 294.2, 441.3, 588.4, 980.7, 1471 | 588.4, 980.7, 1471 (60, 100, 150) |
588.4, 980.7, 1471 (60, 100, 150) |
Minior Load | N kgf |
98.07 10 |
98.07 10 |
29, 42, 98, 07 (3,10) |
98.07 10 |
98.07 10 |
Max. Test Height | mm | 230 | 230 | 230 | 230 | 230 |
Depth of Throat | mm | 133 | 133 | 133 | 133 | 133 |
Net weight Approx | kg. | 65 | 65 | 62 | 67 | 73 |
Machine Dimensions (Approx) | mm | L-450 W-265 H-627 |
L-450 W-265 H-627 |
L-450 W-265 H-627 |
L-450 W-180 H-627 |
L-565 W-180 H-627 |
General Discription :
MCSmake Pendulum type Imapct Testing Machine Model MIT-30 is designed fro conducting Izod & Charpy test. The test confirms to BS:131: PART IV 1972 (1993) BSEN:1993
The pendulum is mounted on antifriction bearing. It has two starting positions, for Charpy test pendulum swings down to breack the specimen and the enery absorbed in the specimen is between height of drop before rupture and the height of rise after rupture of test specimen. The reading is shown on dial scale from maximum pointer positon.MCShas developed electronic model MIT - 30 (E) microprocessor based panel with digital display. The reading is directly available on digital display. It aslo provided printer interface.
There are two strikers and one combined support available for fitting in to the pendulum and on to the base of the machine for Izod, Charpy test. Changing from one striker to another is achieved simply by fixing the new striker into it's position.
Charpy Test :
The charpy test piece rests alloy steel support anvils, fitted on the base of the machine rigidly held in position by allen screw End stopper is provided for quickly and accurately locating the test piece centrally between the supports
IZOD Test :
The izod test piece is clamped vertically in izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece & the Allen screw enable clamping of the test piece incorrect height with the help of izod setting gauge supplied.
Model : MIT - 30 (ASTM)
The impact tester offered with 300 J energy exclusively for Charpy test confirming to ASTM E-23. This machine is geometrically checked in the works to the more stringent requirements of the American standard the accuracy of the machine is then verified by PROOF TEST by testing standard test specimens supplied by the NIST, USA. All two sets of the live specimen must agree with the normal values within certain tolerance specified.
Optional Accessories for MIT 30 / MIT 30 E :
Izod support for 0.450" dia Izod round specimen. Self centering long quick and accurate setting of Charpy test sepcimen
"V" notch milling cutter
"U" notch milling cutter
Caliper gauge for checking V notch for Izod & Charpy Templates for checking 10 X 10 mm, corss section of Izod / Charpy test sepcimen Depth notch V & U notch gauge for checking depth below V / U notch angle and radius.
Model | MIT - 30 | MIT - 30 E | MIT - 30 (ASTM) Charpy Test | MIT - 1.5 | MIT - 0.5 |
Maximum Capacity | 300 J / 168 J | 300 J / 170 J | 300 J | 15 J | 5 J |
Minimum Scale Graduation | 2 J | 0.5 J | 2 J | 0.1 J | 0.05 J |
Overall Size (Approx) |
1.65 m (H) 1.1 m x 0.45 mx |
1.32 m X 0.45 m X 165 m (H) |
1.4 x 0.5 m x 1.9 m (H) |
0.5 x 0.3 m x 0.52 m (H) |
0.5 x 0.3 m x 0.52 m (H) |
Net Weight (Approx) | 375 kg. | 375 kg. | 450 kg. | 70 kg. | 70 kg. |
Features :TheMCS'sElectronic Horizontal Chain & Rope Testing Machine incorporates design features to enablehigh accuracy testing with economy, speed and versatilityLoading accuracy as high 1% as per Grade A of BS : 1610-1964 and Grade 1.0 IS : 1828-1975.Straining at variable speeds to suit a wide range of materialsMotor driven gear shafts for quick and effortless adjustment of test length to facilitate rapid fixing of testspecimen High reading accuracy due to large size of dial.Wide range of standard and special accessories, including load stabilizer.Large effective bed clearance enables testing of a wide range of specimen.Simple controls for ease of operationRobust straining frame of an extremely rigid constructionSafe operation ensured by means of safety devicesFully enclosed and protected Pendulum.Precision load cell and microprocessor system for measurementWindow based software for PC operation (optional) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Application : MCSElectronic Horizontal Chain and Rope Testing Machine is designed to test chains and ropes under tension
|
Specification :
Model | CR-10 | CR-20 | CR-30 | CR-50 | CR-100 | CR-200 | CR-300 |
Maximum Capacity (KN) | 100 | 200 | 300 | 500 | 1000 | 2000 | 3000 |
1st Measuring Range (KN) | 0-40 | 0-80 | 0-120 | 0-200 | 0-400 | 0-800 | 0-1200 |
Minimum Gradauation (KN) | 0.01 | 0.02 | 0.03 | 0.05 | 0.1 | 0.2 | 0.3 |
2nd Measuring Range (KN) (Auto selected) | 40-100 | 80-200 | 120-300 | 200-500 | 400-1000 | 800-2000 | 1200-3000 |
Minimum Gradauation (KN) | 0.025 | 0.05 | 0.075 | 0.125 | 0.125 | 0.5 | 0.75 |
Distance between gripping heads (inclusive or ram strock in (mm) |
100-3000 | 100-3000 | 100-3000 | 100-3000 | 100-3000 | 100-3000 | 100-3000 |
Adjustable in steps in (mm) | 500 | 500 | 500 | 500 | 500 | 500 | 500 |
Ram stroke (mm) | 500 | 500 | 500 | 500 | 600 | 600 | 600 |
Ram speed max. (mm/meter) | 300 | 300 | 150 | 120 | 60 | 50 | 35 |
Bed Clearance | 320 | 320 | 500 | 550 | 800 | 1000 | 1200 |
Grip for rounds bar | 10-30 ø | 10-30 ø | 10-40 ø | 20-50 ø | 20-60 ø | 20-70 ø | 20-80 ø |
Grip for wire | 10-22 ø | 10-25 ø | 15-35 ø | 15-40 ø | 20-50 ø | 20-60 ø | 20-70 ø |
Connected Load :
HP | 1.5 | 2.5 | 2.5 | 3 | 6 | 7 | 9.5 |
V | 400-440 | 400-440 | 400-440 | 400-440 | 400-440 | 400-440 | 400-440 |
ø | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
Introduction
MCS range of spring testing machines are used for quick and accurate testing of tension and compression springs. The machine comprises of two hard crome plated cclomns with fine cut single screw with hand wheel for manual loading and unloading arrangement. The machine uses a high pricision load cell for measurement of force. For displacement measurement, mechanical linear scale or digital vernier caliper or rotary encoder is used. Measuring system of machine is based on latest microprocessor based electronics with tare facility.
Options
Digital vernier scale with 0.01 mm resolution for displacement indication ( 6" or 12")
Rotary encoder with separate digital unit 0.1 or 0.01 mm resolution
9 / 24 pin Dot-Matrix printer interface
Serial interface hardware with data transfer software to computer
Motorised loading operation.
FeaturesMicroprocessor based unitForce Measurement Accuracy +/- 1 % of indicated load or 0.5 % of full load value whichever is higherQuick and accurate measurementInterchangeable load cellsModulus data for load & displacementOptional Dot-Matrix printer interfaceOptional RS-232 Computer interface with window based software. | ||
|
Features :
Good for testing laminated and coil springs.
Load indication on large dial and deflection indication on electronic digital display with 0.1 mm least count.
Autographic elongation recorder.
Various models - Max load capacity from 6 to 50 Tone
Loading accuracy well within 1%
Creep Testing Machines - For Metal |
Creep and Stress Rupture :MCS has developed Creep and Rupture testing machine using state of the art technology. It combines high accuracy with long time reliability, essential qualities for modern day creep and stress rupture testing. Constructed for the discerning user, particularly those who appreciate the value of testing individual specimens, the model CP has a choice of load capacities: 50, 30, 20 and 10 kN. The MCS-CP machine has four chromium plated steel columns and substantial upper and lower crossheads. The load frame is supported by a completely enclosed robust base unit which has four corner leveling feet and a protective fabricated top cover. The upper crosshead carries the lever assembly which includes a lockable counterbalance weight. There are hardened knife-edges at all fulcrums. By means of this lever arrangement, slotted incremental weights, carried by a weight pan/rod assembly, apply load through the test specimen. CP-50 uses double lever and other capacity machine uses single lever arrangement. | |
Accurate axial loading of the specimen is ensured by a co-planar knife-edged coupling, located at each end of the loading string. The loading string and furnace are aligned to the centre of the two front columns. The three-zone closed cylindrical furnace is attached to the front columns of the load frame by two pairs of guide blocks and has an integral counterweight mechanism which considerably eases the raising and lowering operation. When the furnace is raised there is complete accessibility for specimen replacement and extensometer/thermocouple attachment. The furnace can be supported in any position by a lockable clamp.
Applications :
Creep testing at elevated temperatures
Stress to rupture
Stress relaxation
Constant load test in compression
Drive Systems :
The correct load is applied to the specimen when the lever is in the horizontal position. To reposition the lever manually, the loading string can be raised or lowered by rotating the chromium plated capstan hand wheel at the rear of the base unit. Through a 20:1 ratio worm gearbox and drive shaft, the lead screw connected to the lower loading bar can be adjusted up to its full travel of 100 mm. how ever, automatic lever leveling is highly recommended.
An opposing pair of optical switches fixed to the lever detects movement of the lever from the horizontal plane, and then activates an electric motor which drives the lead screw to correct the position of the lever in the event of furnace failure, the automatic lever leveling system will maintain the correct test load on the specimen as the furnace cools down. The drive system includes, over travel trips and an anti-torque bar assembly which prevents any torsional loading of the specimen during lever repositioning.
The CP machine lever calibrates to IS 1828-2005, Class I. This machine is designed for the laboratory requiring a large number of test points within a limited floor area. It is compact yet versatile in its operation and requires no special foundations. Shock absorbers prevent vibrations being transmitted to other loading strings when a specimen failure occurs. In the event of a power or furnace failure, the system fails safe. A small cabinet contains the three-zone temperature controller , elapsed time meters and transducer conditioning modules, if extensometers are supplied.
Closed Loop Servo Control :
MCS offers an electronic creep testing machine with full closed-loop servo-control in three capacities: 10, 20 and 30 kN. Creep, stress relaxation, slow strain rate and constant stress tests (assuming constant volume change in the test specimen) are performed automatically under extremely accurate closed-loop control.
The drive system comprises a AC Sevo motor with toothed belt and gearbox to the recirculating ballscrew actuator. A backlash-free, anti-torque bar and a pneumatically operated mains failure protection device are incorporated as standard. Load cells, electronic extensometers, furnace, temperature controllers, elapsed time meters and loading bars are identical to those available for the CP series, described earlier in this brochure.
Creep Laboratory Management Systesm :
MCS can provide a fully computerized supervision, monitoring and data logging system for both mechanical and electronic creep machines. This CLMS is designed to monitor up to 120 individual machines or test points on a minute by minute basis
A complete laboratory status display keeps
The supervisor constantly up to date with exactly what is happening at each test point. Errors and warnings are audible and visual, and are shown on the computer screen as well as recorded on a printout. Using the in-built databases of available equipment including : test point type, weights, furnaces, thermocouples and HTD extensometer for varied hot tensile specimens , displacement transducers, it will select the optimum configuration for your test.
Logarithmic logging of data keeps files manageable, with the last 24 hours logged in 15 minute intervals. All test results can be viewed in both tabular and graphical formats. CLMS includes full file management facilities enabling password protection, copying, deleting or exporting in spreadsheet format.
Extensometry :
MCS manufactures highly sensitive and accurate electronic extensometer which is mounted axially on the test specimen. They are suitable for attachment to plain and round test specimens and are of twin transducer design.
Temperature Control :
Temperature is controlled directly from a thermocouple on the test specimen. The three-zone controllers incorporate microprocessor based PID instruments which give three-term control and digital display. Proportional band, integral and derivative time constants, cut back and heat power limit are standard features.
Introduction :GWTA series High Temperature Creep and Relaxation Testing Machine is designed as low cost solutions for long-term creep and stress relaxation testing applications of metallic and alloy materials under high temperature in accordance with ASTM, BS, EN, ISO and other similar international testing standards. SANS offers three models electronic high temperature creep testing machine with full closed-loop servo-control in three capacities : 30kN, 50kN and 100kN Instruction & configuration GWTA Series high temperature creep and relaxation testing machine apply advanced servo motor and ball screw actuator which assure loading conveniently and simply. The drive system comprises a printed circuit motor with toothed belt and gearbox to the recirculating ball screw actuator. A backlash-free, anti-torque bar and a pneumatically operated mains failure protection device are incorporated as standard. Load cells, electronic extensometers, DCS-300 controller, furnaces, temperature controllers, elapsed time meters and loading bars are identical to those applications for the GWTA series. A completely enclosed robust base unit supports the lower crosshead and test actuator. This base unit houses an integral spur gear box/HTD toothed belt drive assembly, printed circuit motor & tachometer |
Features & Functions :
Motorized draw-head assembly automatically compensates for specimen elongation and keeps loading bar with excellent load accuracy of +/- 0.5% guaranteed.
Both room temperature and elevated temperature systems are available
Furnace and chambers available with temperature ranges from 200 to 1200in common air environments
Numerous high temperature pull rods, specimen holders, furnace systems and extensometers available for creep and stress Relaxation applications. Many of which are
also adaptable to hot tensile testing applications on universal testing machines.
Relaxation test be available via GWTA Series instead of lever type-high temperature stress rupture testing machine
DSC-300 control system owns the three closed control function as load control, extension control, and velocity control. High precise control and accurate load with load
measurement resolution reach 1/300000; the loading testing curve can be plotted automatically.
Additionally, manual operation also be offered, users can unload to protect the apparatus by hand, especial the load cell, when suddenly power cut off.
SANS Powertest software owns powerful function offering specimens registration, apparatus control, test data acquisition and store, test result inquiring, data processing
and test report export
Remote communication control function saves your operators invigilation during testing process; alarm message can be transmitted to your mobile phone to inform you
test situation by equipping with special dial number device.
High Temperature Furnace:
SANS new designed three-zone open cylindrical furnace features ceramic fiber insulation structure which is the first application in China. The heating elements are individually take action on ceramic half tube sections, and provide three heat zones for excellent control of temperature gradients and reliably continuous operation up to the specified maximum temperature. During the test the emperature is controlled directly by a thermocouple on the test 0specimen. The three-zone controllers incorporate the microprocessor based instruments which give three-term control and digital display. Proportional band, integral and derivative time constants, cut back and heat power limit are standard features. In addition, a range of test chamber assemblies is available for use inside the high temperature furnaces, thus allowing creep studies under hostile atmospheric conditions.