Max Marine

Kharghar, Navi Mumbai, Maharashtra

Features:

• Diaphragm hand pump with Fixed Plastic handle
• Self-priming
• Easy to remove clamp ring for maintenance/head rotation

Features:

• Diaphragm hand pump with Aluminium handle
• Self-priming
• Easy to remove clamp ring for maintenance/head rotation

Details:

• 12v 4" in-line bilge blower 270 cfm, engine
• ventilation / cooling fan
• 4" in-line blower 12 volt airflow 270. 0 cfm (7660l / per minute) 6 amp draw
• For ventilation of bilges, heads, galleys and engine compartments.
• Bus ventilation (engine and bathrooms)
• Used to remove dangerous fumes, stale air and odours.
• Corrosion resistant abs plastic housing.
• Built in mounting feet allow easy vertical or horizontal installation.
• Very low current draw,
• High volume air flow and long life
• Sealeds motor shaft for moisture protection.

Seaflo Automatic 750 GPH 24V Bilge Pump Boat Built In Float Switch For Boat Marine

SEAFLO Bilge Pump 12V / 24V 1100 GPH Submersible for Boat RV Marine
Specifications

Voltage: 12V / 24V DC

Flow capacity: 1100 Gallons per hour (4, 165 Litres per hour)

Current draw: Only 2.0 Amp

Hose Outlet: 1 1/8" (29mm)

Dimensions: Height 4.25" x Width 3.57"

The 41-Series pump provides high volume water flow with reduced pump cycling, thanks to the quad?chamber diaphragm and internal bypass. These models are designed to run on water systems with no accumulator tank necessary, and up to five outlets. It is also suited for use with a holding tank water system, as may be found in a boat, RV or remote cabin. It provides up to 4.5 gallons per minute, suitable in a system of up to five fixtures. The 41-Series pumps are self-priming, and can run dry without damage, performance reliable and low current.This automatic demand water system pump has a built-in pressure switch, which automatically starts and stops the pump when faucet is opened and closed.They're easy to install service and winterize with quick snap-in port fittings.

Seaflo 130CFM 12v / 24v Flex Mount Bilge Blower

SEAFLO non-automatic 2000GPH bilge pumps offer standard action activated by a panel or float switch.Small size, high efficiency, low current (low cost switching power supply supporting).Removable strainer for easy replacement or in the event that the pump becomes clogged with debris.Availalble for DC 12 Voltage & 24 Voltage.

Seaflo Automatic 1100 GPH 12V / 24V Submersible Bilge Pump Boat Built in Float Switch for Boat Marine

Specifications

Voltage: 12V / 24V DC

Flow capacity: 1100 Gallons per hour (4, 180 Litres per hour)

Max Pump Head 11 Vertical Feet

Current draw: Only 4.0 Amp

Hose Outlet: 1.1" (28mm)

Dimensions: Length 145mm (5.71") x Width 83mm (3.27") x 103mm (4.05")

Application:

• Can be widely used in water sampling, high-volume liquid transfer, low-noise continuous workplace;
• Large aquarium, small swimming pool, water reservoirs, fountains and many other occasions.
• Fresh water, sea water analysis, waste water treatment, water sampling, water purification, bilge water emissions from ships, breeding ornamental, water cycle transfer, agricultural spraying, irrigation, floors, carpet cleaning, etc.

Suitable Areas:

Environmental protection, medicine, shipbuilding, fish farming, industry, agriculture, home economics and other areas.