Process Pumps #12297019

A dual-function pump eliminates the need for hand pumps and dry-bowl valves. With the push of a button, the self-priming flush pump rinses the bowl as the Macerator and high-capacity scavenger pump grind up waste and pump it out.

High Quality nylon self priming hand pump. 25.4mm or 38.1mm hose. Draws 15 gallons per minute

Application: Suitable for pumping bilge water, saltwater or diesel transfer.

Hand pumps compact design easily installed in tight bilge spaces.Features:

1. Diaphragm hand pump with Aluminium handle2. Self-priming3. Capacity: 720GPH (2724LPH)4. Hose Dia.: Inlet OD. 1"(25.4mm)/ 1-1/2 (38.1mm) outlet OD. 1 (25.4mm) / 1- 1/2"x38.1mm)5. Max suction lift: 3m (10ft)6. Max discharge head: 4m (3.5ft)7. Easy to remove clamp ring for maintenance/head rotation

High Quality nylon self priming hand pump with Fixed Plastic Handle. 25.4mm or 38.1mm hose. Draws 15 gallons per minute

Application: Suitable for pumping bilge water, saltwater or diesel transfer.

Hand pumps compact design easily installed in tight bilge spaces.Features:

1. Diaphragm hand pump with Fixed Plastic handle2. Self-priming3. Capacity: 720GPH (2724LPH)4. Hose Dia.: Inlet OD. 1"(25.4mm)/ 1-1/2 (38.1mm) outlet OD. 1 (25.4mm) / 1- 1/2"x38.1mm)5. Max suction lift: 3m (10ft)6. Max discharge head: 4m (3.5ft)7. Easy to remove clamp ring for maintenance/head rotation

connections: for 19mm (3/4") bore hose.
dimensions: 99mm high, 64mm x 74mm.
output: up to 31 litres/minute (7 gallons/minute) without
check valve. max. recommended discharge head 2m.
light, compact pump for ski-boats and small vessels.
tough plastic body with integral strainer.
quick release inlet strainer allows rapid cleaning.
low amp draw conserves batteries.
built-in thermal cut-off. motor rated for 1500-hour life.
check valve included for back flow prevention.
vented body to prevent air locking.
threaded port for easier installation and maintenance.
for automatic operation, use rule float switches
35a, 37a, 40a.
base not interchangeable with old range but can be
fitted to existing screw holes.
packaged dimensions: l:18.00 x h:9.00 x w:17.00cm
actual weight: 0.41 kg (approx. 0.61 kg packed)

02 Series Seaflo Bilge Pump Float Switchhas long life, switching frequency up to 10 million times. And it use ultrasonic welding, forming a seal, reliable and secure, not leaking. Shells made of high quality ABS material, perfectly controlled with ball design.

Features:

• Ideal flow sensor for bilge pump.
• 18A max.
• Unique internal steel bearing activation.
• Turns pump on when water level reaches 2.3(60mm).

seaflo bilge pump 12v 3700 gph submersible for boat rv marine

Connections: For 28mm (1 1/8") bore hose.Dimensions: 115mm high, 60mm base diameter.Output: Up to 66 litres/minute (14 gallons/minute).Max. recommended discharge head 2m.Fully automated bilge pump with computerized operation.Compact pump for smaller vessels.Tough plastic body.Quick release inlet strainer allows rapid cleaning.Low amp draw conserves batteries.Ignition protected.No need for a separate float switch.Third wire for manual override.Packaged Dimensions: L:15.00 x H:8.00 x W:20.00cmActual Weight: 0.40 Kg (Approx. 0.60 Kg packed)

Provides ventilation for engine compartments, galleys, bilges and heads. Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings, black ABS plastic construction for long life and use in the marine environment.

Jabsco Submersible bilge pump 3700gph 24v / 12v Model 16A / 14A

Connections: For 38mm (1.5") bore hose.Dimensions: 180mm high, 135mm base diameter.Output: Up to 220 litres/minute (48 gallons/minute).Max. recommended discharge head 4m.High capacity pump for larger yachts and motor cruisers.Tough plastic body.Quick release inlet strainer allows rapid cleaning.Motor rated for 2500-hour life.Ignition protected.For automatic operation use Rule Float Switches37A, 40A.Packaged Dimensions: L:19.00 x H:28.00 x W:16.00cmActual Weight: 2.72 Kg (Approx. 3.22 Kg packed)

SEAFLO Bilge Pump 12V / 24V 2000 GPH Submersible For Boat RV Marine

SEAFLO switch panel SFSP-015-02.Controls any pump equipped with an automatic float switch.Toggle has three positions (automatic, off, or manual) and has a "fail safe" spring return to "off" from the "manual" position. Panel is black plastic switch with a LED indicator when switch is on. To control and protect any pump work with an automatic float switch, to prevent impact of intermitent high current.