Max Marine

Kharghar, Navi Mumbai, Maharashtra

connections: for 19mm (3/4") bore hose.
dimensions: 99mm high, 64mm x 74mm.
output: up to 31 litres/minute (7 gallons/minute) without
check valve. max. recommended discharge head 2m.
light, compact pump for ski-boats and small vessels.
tough plastic body with integral strainer.
quick release inlet strainer allows rapid cleaning.
low amp draw conserves batteries.
built-in thermal cut-off. motor rated for 1500-hour life.
check valve included for back flow prevention.
vented body to prevent air locking.
threaded port for easier installation and maintenance.
for automatic operation, use rule float switches
35a, 37a, 40a.
base not interchangeable with old range but can be
fitted to existing screw holes.
packaged dimensions: l:18.00 x h:9.00 x w:17.00cm
actual weight: 0.41 kg (approx. 0.61 kg packed)

Dimensions: 127mm long, 40mm wide, 110mm high (at max. lift)Maximum Current: 14(amps)For automatic on/off bilge pump control.Switch design prevents rapid on/off cycling.Also available with fuse holder - see belowMercury FreePackaged Dimensions: L:14.00 x H:11.00 x W:14.00cmActual Weight: 0.10 Kg (Approx. 0.30 Kg packed)

Connections: - for 38mm (1) bore inlet hose, 25mm(1) bore discharge hoseDimensions: - 290mm long, 120mm wide, 95mm highOutput: - up to 43 litres/minute (9 gallons/minute) at 3mtotal head. Maximum recommended total head 6mCompact toilet waste macerator pump15 minute rated, for use with waste holding tanks up to900 litres (200 gallons) capacityGrinds raw toilet waste to a uniform slurry for easytransfer and dischargeSelf-priming up to 0.6m vertical liftFully sealed motor with Dry-Run protection deviceHeavy duty 4 blade chopperPackaged Dimensions: L:30.00 x H:9.00 x W:13.00cmActual Weight: 2.19 Kg (Approx. 2.69 Kg packed)

Connections: - for 38mm (1) bore inlet hose, 25mm(1) bore discharge hoseDimensions: - 290mm long, 120mm wide, 95mm highOutput: - up to 43 litres/minute (9 gallons/minute) at 3mtotal head. Maximum recommended total head 6mCompact toilet waste macerator pump15 minute rated, for use with waste holding tanks up to900 litres (200 gallons) capacityGrinds raw toilet waste to a uniform slurry for easytransfer and dischargeSelf-priming up to 0.6m vertical liftFully sealed motor with Dry-Run protection deviceHeavy duty 4 blade chopperPackaged Dimensions: L:30.00 x H:9.00 x W:13.00cmActual Weight: 2.19 Kg (Approx. 2.69 Kg packed)

Connections: - for 38mm (1) bore inlet hose, 25mm(1) bore discharge hoseDimensions: - 290mm long, 120mm wide, 95mm highOutput: - up to 43 litres/minute (9 gallons/minute) at 3mtotal head. Maximum recommended total head 6mCompact toilet waste macerator pump15 minute rated, for use with waste holding tanks up to900 litres (200 gallons) capacityGrinds raw toilet waste to a uniform slurry for easytransfer and dischargeSelf-priming up to 0.6m vertical liftFully sealed motor with Dry-Run protection deviceHeavy duty 4 blade chopperPackaged Dimensions: L:30.00 x H:9.00 x W:13.00cmActual Weight: 2.19 Kg (Approx. 2.69 Kg packed)

Connections: For 28mm (1 1/8") bore hose.Dimensions: 115mm high, 60mm base diameter.Output: Up to 66 litres/minute (14 gallons/minute).Max. recommended discharge head 2m.Fully automated bilge pump with computerized operation.Compact pump for smaller vessels.Tough plastic body.Quick release inlet strainer allows rapid cleaning.Low amp draw conserves batteries.Ignition protected.No need for a separate float switch.Third wire for manual override.Packaged Dimensions: L:15.00 x H:8.00 x W:20.00cmActual Weight: 0.40 Kg (Approx. 0.60 Kg packed)

Connections: - for 100mm (4") ductingDimensions: - 130mm long, 120mm high, 150mm wideEfficient high volume air flowQuiet runningSlip-on inlet and outlet ducting connectionsMade in corrosion-resistant materialsMounts in any position on any flat surfaceLow current drawSame as model 30500-0000Packaged Dimensions: L:15.00 x H:12.00 x W:13.00cmActual Weight: 0.58 Kg (Approx. 0.83 Kg packed)

Jabsco Submersible bilge pump 3700gph 24v / 12v Model 16A / 14A

Connections: For 38mm (1.5") bore hose.Dimensions: 180mm high, 135mm base diameter.Output: Up to 220 litres/minute (48 gallons/minute).Max. recommended discharge head 4m.High capacity pump for larger yachts and motor cruisers.Tough plastic body.Quick release inlet strainer allows rapid cleaning.Motor rated for 2500-hour life.Ignition protected.For automatic operation use Rule Float Switches37A, 40A.Packaged Dimensions: L:19.00 x H:28.00 x W:16.00cmActual Weight: 2.72 Kg (Approx. 3.22 Kg packed)

Dimensions: 127mm long, 40mm wide, 110mm high (at max. lift)Maximum Current: 14(amps)For automatic on/off bilge pump control.Switch design prevents rapid on/off cycling.Also available with fuse holder - see belowMercury FreePackaged Dimensions: L:14.00 x H:11.00 x W:14.00cmActual Weight: 0.10 Kg (Approx. 0.30 Kg packed)