Maxwell Scientific Corporation

Ambala Cantt, Ambala, Haryana

Oil filled resistance standards are available for single value say 10milli-ohm with accuracy of 0.05 %. Resistance coils are made of heavy gauge manganin wire having virtually zerotemperature coefficient (.000002) of resistance are used. It can be calibrated by nabl accredited lab.

ANALOG SIGNAL SAMPLING & RECONSTRUCTION KIT

ANALOG SIGNAL SAMPLING & RECONSTRUCTION KIT This kit helps the students to understand the principle of Sampling of Analog signals. By reconstructing the sampled signals and comparing with original signal one can clear his idea about sampling & reconstruction. Internal sine wave generator of 1KHz (5V P-P). Sampling frequency of 2KHz, 4KHz, 8KHz, 16KHz & 32KHz. Duty ratio of 10%-90% in 10% steps (switchable) Onboard Sample & Hold circuit. Ripple counter generating sampling frequencies of 20Hz to 20KHz. Onboard low pass filters of 2nd order & 4th order. Set of Patch Chord & User Manual. All relevant Tests points are brought out to observe the signals at various points

The providedDC Regulated Power Suppliesare manufactured in compliance with set quality standards using sophisticated machinery and latest technology. The offered products are used to regulate the supply of power to the connected machines. Provided product is tested on predefined quality parameters to deliver it defect free. Furthermore, thisDC Regulated Power Suppliesis available to clients at nominal prices.

Features:

Load Regulation+0.05% from no load to full load

Line Regulation+0.05% for+10% variation

Ripple- Less than 1 mV

Meters- 2 Digital meters to monitor V and A

Protection- Against short circuit & overload.

Special Feature- Tripping Facility at short circuit.Button will restorevalues.

To determine the resistance of given `RTD' ( PT-100 type) on different

Temperature readings. In PT-100 sensor, Resistance will vary with increase of temperature.nt-size:11.0pt;font-family:"Arial", "sans-serif"'>To determine the resistance of given `RTD' ( PT-100 type) on differentTemperature readings. In PT-100 sensor, Resistance will vary with increase of temperature.

Water Absorption Test Apparatus (Vaccum Oven)

(As per IS : 10810 / 1984)Model No. VO-281

Temperature controlled by digital controller cum indicator.

The inner chamber is made of Stainless Steel and Heaters are clamped on to its outside and operate at low heat.

The outer cabinet is of mild steel with Glass wool Insulation in between.

The Oven is fitted with a Vaccum Gauge and a vaccum cock fitted on the right hand side.

Two indicator lamps show the presence of electric supply and working of heaters respectively.

Oven is supplied with a perforated tray of Stainless Steel.

Oil-Sealed Pump quiet-operating and vibrations less, designed for continuous duty and factory - tested to assure satisfactory performance.

The pump mechanism is comprised in a metal case with oil level sight gauge, and drain plug at base.

Motor-driven pump completely mounted on rectangular base plate.

While climbing on the success ladder, it has become increasingly important for us to deliver precisely tested and high grade Breadboard Trainer kit to clients. Offered kit is manufactured under the guidance of knowledgeable professionals using sophisticated machinery. Provided kit is tested on all level of production to deliver a defect free product to the clients.

nstrument comprises of Microphone Preamplifier stages consists of MIC (Microphone) , Preamplifier & Amplifier ( Voice is converted to electrical signal & then amplified ) & fed to LED ( Transmitter) & then through fibre cable , signal is sent to Photodetector ( Transistor ) & again amplifier & output is sent to Speaker Unit. Power Supply of + 6 VDC) is used in Amplifier ckt. 2 No. Fibre Optics cables are provided ( one of them is 50 cm long & the other is 100 cm long.). Connectors at both end of fibre cable are provided for insertion in sockets provided on the front panel. Bending Losses can also be studies in long wire.MIC with 2 meter long lead and a Speaker 4", 4 ohm. is mounted in a vertical box with 1 meter long connecting leads.2 No. Fiber optic cable having length of 50 cm & 100 cm. are provided.

Instrument comprises of two DC Power Supplies of 0-1V & 0-100V DC100mA, two acrylic meters (dual range) to measure voltage & current, 1 PN Junction Diode (silicon) , 1 Germanium diode & 1 Zener Diode of approx. 75 V is mounted on the panel & connections brought out at sockets. Double Tappered Box (Powder coated) with proper viewing of analog meters is provided. Set of 5 single point patch cords & Users Manual is provided.

Anderson Bridges

Our company is engaged in manufacturing and supplying a wide range ofAC Anderson Bridges. These are used to measure the inductance of a coil in more effective manner. Provided bridges are manufactured in accordance with industry set quality standards using advanced technology in fully equipped production unit under the supervision of talented experts. Furthermore, theseAC Anderson Bridgesare available to clients at nominal prices. Features: Compact design Rust proof Easy to use Low maintenance Details: Complete in all respect, no external component required AndersonBridgeto determine Self-Inductance of a coil MAIN FEATURES OF THE BRIDGE : R- 3 decade resistance dials having value from 1 ohm to 1 K ohm. r3 decade resistance dials having value from 10 ohm to 10 K ohm. C1- 2 fixed Standard Capacitors having values 0.1 mfd and 0.2 mfd. P = Q- Fixed Standard values of 1000 ohms each. S- Single decade resistance dial having valuesfrom 0.1 ohm to 1 ohm. L- Three unknown Inductances are also provided. Inbuilt A.C supply of frequency 1 KHz, D.C supply of 3 volts and Digital Null Detector for DC & AC balance is provided. 6 interconnection Leads with 4mm banana plugs, 3 unknown Inductances are provided on board. Comprehensive User Manual will explain required results.

Audio Oscillator

The offeredAudio Oscillatorisavailablein various technical specifications as per the demand of the clients. This oscillator is used to produce repetitive frequencies in the audio range. It is also examined on each and every level of production to deliver it defect free to the clients. Moreover, clients can easily avail thisAudio Oscillatorfrom us at reasonable prices. Features: Compact design Rust proof Accurate output Easy operation Details: (Sine & Square Wave) Frequency Range - 1 Hz to 100 KHz in 5 decade steps Output Voltage 0 - 10 V p-p Continuously Variable. Selector Switch for Amplitude 0-1 / 0-10 V is provided. Selector Switch for Sine & Square Wave is provided. Output Impedence - 50 ohms.

Complete in all respect, no external component required

De-Sauty Bridge to determine Capacitance of a Capacitor

R1 . 3 decade resistance dials having range X 10 , 100 & 1K ohms.

R2 . Three more decade of same value as above.

C1 . Standard Capacitors having .1 mfd and .2 mfd.

C2 . Four unknown Capacitors are provided.

Digital Analog Training System

We are an acclaimed name engaged in manufacturing and supplying a superior quality range ofDigital Analog Training System.This training system is used in many industries to provide training to their employees about the digital and analog signals. Provided training system is manufactured using sophisticated machinery under the vigilance of dexterous professionals. It is also examined on various quality checks to ensure the flawlessness. Furthermore, thisDigital Analog Training Systemis available to clients at nominal prices. Features: Easy to install Excellent finish Highly accurate Rust proof Details: 1.Solderless Breadboard have 1680 tie points * Provided with 2 Terminal strips & 4 Distribution strips. 2. Buit in DC Regulated Power Supply * DC Supply+ 5 V/ 1 Amp. * 0 to+ 15 V DC (Variable), 1 Amp. 3. Built - in Function Generator * Waveform : Sine, Square & Traingle (with selector switch) * Freq. 1Hz - 100 KHz freq. control(with selector switch) * Variable Amplitude ( Variable upto 10 V ) * TTL 5V p-p

Objective: To construct a Optical Transmitter and Transmission of Signal through Fiber Optics Cable. To construct a Optical Receiver & study the Attenuation of Signal when transmitted from Transmitter to Receiver end. Analog & Digital Link can also be studied as this unit is complete with Sine & Square Waves. Bending Losses can also be studied.

Features: Instrument comprises of Microphone Preamplifier stages consists of MIC (Microphone) , Preamplifier & Amplifier ( Voice is converted to electrical signal & then amplified ) & fed to LED ( Transmitter) & then through fibre cable , signal is sent to Photodetector ( Transistor ) & again amplifier & output is sent to Speaker Unit. Power Supply of + 6 VDC) is used in Amplifier ckt. 2 No. Fibre Optics cables are provided ( one of them is 50 cm long & the other is 100 cm long.). Connectors at both end of fibre cable are provided for insertion in sockets provided on the front panel. Bending Losses can also be studies in long wire.

Standard Accessory : MIC with 2 meter long lead and a Speaker 4", 4 ohm. is mounted in a vertical box with 1 meter long connecting leads.

2 No. Fiber optic cable having length of 50 cm & 100 cm. are provided.

Optional Accessory : Digital multimeter (3.1/2 Digit, Big Size Display )

 Conditioning Chamber (Model CC-361)                         

Temp. Range : -20°C to + 45°C. Accuracy ± 1°C. .

-      Provided with Digital Temp. indicator cum controller. 

Humidity is also provided for  setting RH of 50 to 90 % .

Hot Air Oven (Model HO-153)
Size 18"x18"x18" (Chamber made of G.I. sheet, Temperature up to 250C), PID for Temp. Control & Display is provided.

Standard megohm box : model no. Srb-6 used as reference standard to be used with million meg-ohm meter model mm-107 or mm-108d or digital insulation tester.--------- 8 different values ------------------------ranges 2m, 20m, 200m, 2g, 10g, 20g, 50g & 200gohm resistances.Max. Applied voltage = 1000v upto 20mohm , 5000v for 200mohm & above values , accuracy of resistance : 5% .Special feature: provision for dehumidifier is provided in the acrylic box & you can have stable readings even in rainy season. Press power button & take stable readings after 1 hour.

( Standard method of test for inflammability of using the Oxygen Index Method ) having easy sample loading & ignition system and direct read-outof the critical oxygen index to a high degree of accuracy.It eliminates operator error & calculations.Provided with Indian Analyser.

Oxygen, Nitrogen cylinder & their regulatators are not provided with the equipment

we are instrumental in manufacturing and supplying premium quality 3 Phase Loading Rheostat. This rheostat is manufactured under the stern guidance of qualified professionals in tandem with set quality standards using sophisticated machinery and latest technology. Offered rheostat is used to control the load by the aid of switch control devices. Provided rheostat is tested on various parameters to ensure its performance. Additionally, we provide this 3 Phase Loading Rheostat to clients at nominal prices.

We are one of the leading manufacturers and suppliers of optimum qualitySwedish Chimney.Offered chimney is manufactured using supreme quality components and modern machinery in tandem with industry defined quality norms under the stern supervision of qualified experts. Provided chimney is used for fire retardant test for bunched cables and wires. This chimney is widely used as compared to others as it provides accurate results. Furthermore, clients can avail thisSwedish Chimneyfrom us at discounted prices.

Features: