Oil And Lubricants

Leading Manufacturer, Supplier & Retailer of water soluble cutting oils, semi synthetic oils, Hydraulic Oil, Machine Lube Oil and Quenching Oil.

DESCRIPTION

Makes Milky emulsion when mixed proportionately with water.
Anti-rust, anti corrosive, anti foaming and prevents bacterial growth due to biocides.
Gives good tool life and surface finishing.
Recommended for various cutting operations on ferrous and non ferrous materials.
Mixing ratio on oil to water is 1:20 to 1:40 depending upon the operation and tensile strength of the material.
Meets 1115 1986 specification.

Sl.No.	Description	Method	Specification
1.	Appearance	Visual	Amber
2.	Specific Gravity @ 27°C	ASTM 1298	0.9584
3.	pH 5% Solution	Internal	9.2
4.	Foam depression (in secs.) 5% in DM water	IP 312/74	20 Sec. Max
5.	Cast Iron Chip Test (P-Dish) 1:10 Solution ( DM water)	Internal	No Corrosion upto 6 hrs
6.	Emulsion Stability 1:20 solution in DM & 400 ppm Hard water	Internal	Stable
7.	Thermal stability 48 hrs. under room Temperature	Internal	Stable
8.	Hand Refractometer reading 1:20	Internal	3.5 to 4
9.	Refractometer Value	Internal	1.1

Sl.No.	Description	Method	Specification
1.	Appearance	Visual	Amber
2.	Specific Gravity @ 27°C	ASTM 1298	0.967
3.	pH 5% Solution	Internal	9.2
4.	Foam depression (in secs.) 5% in DM water	IP 312/74	20 Sec. Max
5.	Cast Iron Chip Test (P-Dish) 1:10 Solution ( DM water)	Internal	No Corrosion upto 6 hrs
6.	Emulsion Stability 1:10 solution in DM & 400 ppm Hard water	Internal	Stable
7.	Thermal stability 48 hrs. under room Temperature	Internal	Stable
8.	Hand Refractometer reading 1:20	Internal	3.9 to 4.5
9.	Refractometer Value	Internal	1.1

Semi Synthetic type coolant intended for use on ferrous metals and its chemical formula is angled to overcome any difficulties in the cutting and grinding of Cast iron with soluble media.
A reliable small amount of EP additives is present so that a high surface finish can be achieved.

Highly refined chemically stable base additives good for anti oxidant, anti wear, anti rust, antifoam characteristics.
Meets IS 10522-1993 & IPSSI-04-022 Vickers V 104 C vane pump test and ISOVG specification 32/46/68.
Full protection against rusting and corrosion of metal parts.
Recommended as fluid media for hydraulic systems & pumps and even under high pressure, high speed operational environment in machines and mobile equipments.
Also used for valves, cylinders, pistons and gear hydraulic machines, chain drives and compressor crank case lubrication.

MACHINE LUBE OILS ( LUBE 22, 32, 46, 68, 100, 150 )

These oils are heavily refined mineral oil strengthened with anti oxidant, anti wear and corrosion in hibiter additives, having low carbon foaming habits.
Recommended for lubrication of slow and medium speed machineries.
Also can be used in the lubrication system of machine tools, textile machineries and looms of textile machineries.
Heavier grade of these can be used for small open gear system under light duty conditions.

We are engaged in manufacturing and supplying of a wide large of Quenching oils, which is recommended for mass production of high precision high quality products such as bearing races, automotive gears and components.
These are catering to the requirements of commercial vehicles and earth movers equipment.
For normal quenching operations on a wide variety of steel parts such as nuts and bolts, ball bearings certain types of brake drums.

Tell Us What are you looking for? Will call you back

MATRIX LUBRICANT (MATRIX LUBRICANT)
41 I, Raj Narayana Complex, Ganapathy Main Road, , Ganapathi, Coimbatore, Tamil Nadu - 641006
Share us via
Found Something Wrong with this Listing? Report Here.

View Contact No.

MATRIX LUBRICANT Ganapathi, Coimbatore, Tamil Nadu