Primer Paint in Mathura

it is a product which is used for adhesion the paint with surface .It is used in between the surface and paint for foundation having rough or mat type finish , this rough finish is must because that paint will make good adhesion with primer . more...

This thinner is use to thinning down the viscosity of stoving paints. We should apply stoving thinner in stoving type paints . Features & Application: Medium Drying Heat resistant. High efficiency. Excellent adhesion. Low Wear Resistant. Highly Inflammable. Consistency not is accurate. Use in decorative, indu more...

Softouch metalprimer for the wood surfaces. This primer directly applies on the newly metal surface. After that softouch synthetic enamel should be used. Softouch metal primer is available in packing off 20ltr, 10ltr, 4ltr, 1ltr, 500ml, 200ml. more...

Softouch has a wide category in paint productts, in which softouch water based cement primer includes. This product has a smooth finish with high covering. It is applied on the interior cement walls. Softouch water based cement primers is avilable in packing of 20ltr, 10ltr, 4ltr, 1ltr. more...

Softouch wood primer for the wood surfaces. This primer directly applies on the newly wood surface. After that softouch synthetic enamel should be used. Softouch wood primer is available in packing off 20ltr, 10ltr, 4ltr, 1ltr, 500ml, 200ml. more...

• MOQ : 100 Litre
• Application : Paint Walls
• Type : Primer Paint
• Packaging Size : 1-5 L, 10-15 L
• Finish : High Gloss
• Supply Type : Supplier
• Packaging Type : Can, Plastic Bottle
• State : Liquid
• Color : As per requirement
• Country of Origin : India

more...

• State : Liquid
• Color : White
• Type : Primer Paint
• Supply Type : Supplier
• Packaging Size : 1-5 L, 10-15 L
• Packaging Type : Plastic Bottle
• Brand Name : Asian Paints
• Application : Paint Wall

more...

• MOQ : 1 Container
• Manufactured By : Amchem Products Pvt. Ltd.
• Supply Type : Manufacturer
• Duration : Min. 45-60 Mins, Max. 48 Hours
• Process : Conventional Air Spray
• Packaging Type : Plastic Bottle
• Material Surface : Steel
• Finish : High Gloss, High Sheen
• Type : Solvented, Two Component, Modified Polyurethane Primer for Steel.

Though there are numerous high-standard steel primers available on the market, no other primer can be more effective than Purethane AR Primer due to its excellent damp tolerant and deep penetrating quality. When it's a matter of choosing the best quality Purethane AR Primer, nothing can replace the effectiven more...

• Type : 100% Solids (solvent Free), Two Component Polyurethane
• Tensile Strength : > 20 N/mm2
• Usage : Concrete Flooring
• Application Method : Roller, Airless Spray (graco 231-865
• Supply Type : Manufacturer
• Mixing Ratio : Resin / Activator = 2 / 1 (Volume)
• Condition : Temperature 5 - 50 Degree c
• Colour : Resin: Light Yellow Activator: Brown
• Tack Free (30 Degree C) : 60-120 Minutes depending upon surface temp, DFT
• Flim Thickness : 100-150 Microns Wft Depending On Concrete Surface

If you are looking for a high-quality concrete LV primer for making gorgeous-looking concrete floors, then no other brand can offer you better products than PVR Projects. The concrete LV primer we supply is completely solid in form and solvent-free. The mixing ratio of resin and activator in this primer is 2: more...

• Theoretical Coverage : 5.0 - 6.5 Sq.m/ Litre (WFT = DFT)
• Generic Type : 100% Solids (solvent Free), Two Component Polyurethane
• Thinning Ratio : Do Not Thin
• Supply Type : Manufacturer
• Tack Free (30 Degree C)* : 60-120 Minutes depending upon surface temp, DFT
• Application Method : Roller, Airless Spray (Graco 231-865).
• Mixing Ratio : Resin / Activator = 1 / 1 (Volume)
• Film Thickness : 150-200 Microns WFT depending on concrete surface
• Precautions : Use Full Sets of Pre-measured Resin and Activator. Do Not Expose Open Unmixed Drums to Atmospheric M
• Specific Gravity (25 Degree C) : 1.10 (Resin 0.97 +/- 0.03, Activator 1.23 +/- 0.02)

When it's about the matter of selecting the best quality concrete Piv primer for making elegant-looking concrete floors, no other brand can deliver you better products than PVR Projects. The concrete Piv primer we supply is completely solid in form and solvent-free. The mixing ratio of resin and activator in more...

• MOQ : 20 Litre
• Color : Grey
• Categories : Floor, Industrial
• Finish : High Gloss
• Application : Brush
• State : Liquid
• Packaging Size : 1-5 L

Features : Easy application Long term effects Reliable more...

• State : Liquid Coating
• Raw Material : Epoxy
• Country of Origin : India
• Color : Red
• Packaging Type : 1 L
• Application : Appliance Paint
• Material : Polyurethane

Features : Reliable Fine finish Accurate composition more...

• Packaging Type : 1 L, 500ml
• Purity : 100%
• Raw Material : Epoxy
• Color : Red
• Shelf Life : 1 Year
• Application : Appliance Paint
• Material : Polyurethane
• State : Liquid Coating

more...

• MOQ : 50 Litre
• Type : Epoxy Zinc Phosphate Primer
• Packaging Size : 1-5 L
• Supply Type : Manufacturer
• Country of Origin : India
• Recommended Use : Execllent Resistancein High Corrosive Chemical & Coats Environmenet
• Substrate : Metal/concrete
• Application : Brush, Roller, Spray Gun
• Packaging Type : Can

more...

• Recommneded Use : Unibake Primer for Wet On Wet Application of Top Coats.
• Type : Unibake Primer
• Packaging Size : 1-5 L
• Shade : Multicolor
• Supply Type : Manufacturer
• Country of Origin : India
• Substrate : Metal
• Finish : High Gloss
• Packaging Type : Can

more...

• Finish : High Gloss
• Packaging Type : Can
• Recommended : Better Anticorrosive Properties Because of Combinationof Zinc Chromate with Red Oxide Better Alkali
• Shade : Red Oxide
• Type : Epoxy Red Oxide Zinc Chromate Primer
• Country of Origin : India
• Supply Type : Manufacturer
• Application : Brush, Roller, Spray Gun
• SUBSTRATE : Metal

more...

• MOQ : 300 Litre
• Addition : 10-15% & Max 5%
• Flash Point : Base : 23°c Hardener : 23°c
• Brand Name : Saffro Mellow
• Drying Characteristics : Surface Dry : 60 to 90 Minutes
• State : Liquid
• Supply Type : Manufacturer
• Thinner : Epoxy Thinner 190
• Recommended Dft : 30 - 40 µ.
• Application : By Brush / By Conventional Spray / By Airless Spray

Description Two component Epoxy based anti corrosive primer containing zinc phosphate as corrosion inhibiting pigments Recommended Use :- It is recommended as primer on M.S surface for OEM's as well as for process industries like fertilizers, refineries, chemicals and other plants. It can also be applied in d more...

• Brand Name : Saffro Mellow
• Thinner : Type 290
• Supply Type : Manufacturer
• Addition : 10-15% & Max 5%
• Usage : Industrial Use,By Brush / By Conventional Spray
• Mixing Ratio : Base : Hardener (as per Our Recommendation)
• Overcoating Interval : Min : 8 Hours Max : 24 Hours
• Recommended Dft : 30-40 µ.
• Solids By Volume : 40 ± 3%
• Nozzle Orifice : 1.2 -1.4 mm & 0.28- 0.37 mm

Description Two-component air-drying polyurethane based primer containing zinc phosphate as anti corrosive pigment. Recommended Use :- It is recommended as a primer for MS surface in OEM applications as well as in Process industries like fertilizer plants, Refineries, Petrochemical industries for protection o more...

• Storage : Protect from Extremes of Temperature. Store Between 5°c and 30°c
• Packaging Type : Plastic Bucket
• Country of Origin : India
• Sizes : Available in 4 Litre,10 Litre and 20 Litre
• Brand Name : Saffro Mellow
• Coverage : Up to 14 Square Metres per Litre Depending Upon Surface Porosity and Application Method.
• Type : Metal Primer
• Application : Roller, Brush, Dip Or Airless Spray. Provide Adequate Ventilation During Use.
• Warranty : Within 5 Years
• Supply Type : Manufacturer

Drying Times Touch Dry Time - 20 minutes. Recoat Dry Time - 2 hours. Drying times refer to normal conditions (30°C, 50% humidity). Under cooler, humid or still conditions, longer drying times may be necessary. DO NOT USE IN TEMPERATURES BELOW 10°C OR ABOVE 45°C. Surface Preperation Previously Pain more...

• Composition : Catalysed Epoxy Resin/zinc Phosphate
• Type : Two Pack, Cured with Polyamide
• Curing time : 6-7 days
• Applciation : Brush, Airless or Conventional Spray
• Pot life : 5-6 hours
• Mixing Ratio : Base Catalysed -3 :1 By Volume
• Supply Type : Supplier

more...

• Packaging Type : Can
• Packaging Size : 1-5 L
• State : Liquid
• Supply Type : Supplier
• Finish : High Gloss
• Application : Brush, Roller

more...

• Pot Life : 4-6 Hours
• Supply Type : Supplier
• Mixing Ratio : Part a Part B 35:65 By Weight
• Type : Two Pack, Self Cured
• Finish : High Gloss
• Composition : Ethyl Silicate, Metallic Zinc
• Flash Point : Above 22 Degree C

more...

• MOQ : 100 Litre
• Brand Name : Asian Paints
• Form : Liquid
• Packaging Type : Can
• Supply Type : Supplier
• Shelf Life : 1Years
• Country of Origin : India
• Packaging Size : 1kg

more...

• Packaging Size : 1kg
• Color : Yellow
• Supply Type : Supplier
• Country of Origin : India
• Packaging Type : Can
• Brand Name : Asian Paints

more...

• Application : Wall Putty
• Supply Type : Manufacturer
• USD : 9
• Feature : Long Shelf Life, Super Smooth Finish, Unmatched Quality, Weather Proof
• Form : Powder
• Packaging Type : Paper Packet, Plastic Bag, Plastic Bucket, Plastic Packet
• Packaging Size : 10kg, 25kg, 50kg, 5kg

more...

• Packaging Type : Loose, Paper Box, Plastic Packet, Plastic Pouch
• Supply Type : Manufacturer
• Size : 8Oz, 32Oz, 1gal
• Shelf Life : 1Years
• USD : 10
• Packaging Size : 100gm, 10gm, 1kg, 200gm, 500gm
• Color : Red
• Cultivation Type : Common
• Drying Process : Air Dried
• Form : Powder

more...