We are an experienced Manufacturer and Supplier of Mechanical & Electronic Mechanical Extensometer. Our entity is based in Pune, Maharashtra, India. We offer this machine in two models, namely EM-1 i.e. Mechanical Extensometer & EE-2 i.e. Electronic Mechanical Extensometer.  The EM-1 is used for measuring the elongation of the test specimen under load, to have its mechanical properties. Whereas, the EF-2 is used with the Universal Testing Machines for carrying out the tension test. It is used for measuring young's modulus, proof stress or yield stress.

Mechanical Extensometer

• It is essential to measure the elongation of test specimen under load, to have it's mechanical
• properties. FIE Extensometer Model EM-1 is intended to serve the above purpose.

 

Construction & Application :

• This consists of two long knife edges at top, two dial indicators and lower knife edges to actuate
• the dials. The bars are pressed against the speciman by means of clamps
• So that the knife edges bite the specimen to avoid any slip. The upper edges are adjustable to
• provide different guages lengths for measurement. As deformation takes place the lower knife
• edges transfer the movement to the dial guages and the deformation of specimen is shown on
• dials, so that the change in length of specimen by 1/100mm, equals to one division of the
• graduation on dial.

Our noteworthy entity is rigorously engaged in manufacturing and supplying a qualitative range of Electronic Universal Testing Machine Servo Hydraulic. We are based in Pune, Maharashtra, India. It is sourced from the best quality components and latest techniques.

 

Features :

• Motorised Control Valve.
• Load accuracy as high + 1%.
• Straining at variable speeds to suit a wide range of materials.
• Printer & PC graphs enable to study the behaviour of the material.
• Motor drove threaded columns for quick effortless adjustment of middle crosshead to facilitate rapid fixing of the test specimen.
• Simplicity in reading because of digital readouts.
• A wide range of standard and special accessories.
• Easy change from plain to threaded and screwed specimens.
• A Large effective clearance between columns enables testing of standard specimens as well structures.
• Simple controls for ease of operation.
• Robust training frame of an extremely rigid construction.
• Fully enclosed and protected pressure transducer.
• RS 232 serial port for PC control of m/c.
• Applications-
• Electronic Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse, and shear loads. Hardness test on metals can also be conducted.

We are offering erichsen cupping machine.The erichsen cupping test is a ductility test, which is employed to evaluate the ability of metallic sheets and strips to undergo plastic deformation in stretch forming. The test consists of forming an indentation by pressing a punch with a spherical end against a test piece clamped between a blank holder and a die, until a through crack appears. The depth of the cup is measured.

We are a well-reckoned Manufacturer and Supplier of Automatic Cutoff Machines in Maharashtra, India. Abrasive cut-off machines are used for a burn free cutting of metallic samples for spectroscopic & microscopic examination. The entire range of our Automatic Cutoff Machine undergoes a series of quality checks before the final delivery.

Details :

• Abrasive cut-off machines used for burn free cutting of metallic samples for spectroscopic & microscopic examination.
• Assured burn free cut faces from tractor axels to 2 mm diameter niddles are in use for more than32 years.
• Cut capacity up to 150 mm.
• Models – manual, semiautomatic & fully automatic with various cut capacities.
  

We are highly engrossed in Manufacturing and Supplying of Automount. We carry out our operations from Pune, Maharashtra, India. We are backed by a team of dexterous professionals, who manufacture it by using the supreme grade materials and pioneering techniques. Our clients highly praise its sturdy construction, perfect finish, long operational life, and smooth functionality. We are competent to take bulk quantity orders for this machine. We offer Automount machine at a highly affordable price.

Details :

• It is a mounting press for metallurgical specimen mounting
• Models – manual, semi-automatic & fully automatic

We are a well-reputed Manufacturer and Supplier of Double Disc NVF in Pune, Maharashtra, India. We use the best quality components and updated techniques for manufacturing it. Our offered Double Disc NVF is packed in a high-quality packing material, to avoid the chances of mishandling during its transportation. It is burdened with various attributes like sturdy structure, perfect finish, and optimum functionality.

Details :

• Table top double disc polishing machine with variable D.C. motor
• Quick change facility
• One piece basin for clean rust free working area

Our trustworthy organisation is thoroughly engaged in manufacturing and supplying Double Disc. We are based in Pune, Maharashtra, India. Our offered Double Disc is highly acknowledged for its dimensional accuracy, perfect finish, great performance, and long operational life. Our deft professionals manufacture it with a high level of precision. We have a great reputation for making timely deliveries of our consignments.

Details :

• Table top single disc polishing machine
• Variable speed from 150 to 1200 rpm
• For grinding & polishing microscopic inspection of metals, ceramics

The clients can avail from us the efficient assortment of disc polishing machine, which incorporates the advanced features and technology. The range of our disc polishing machine comprises of double disc and single disc machines. Our disc polishing machine is efficient in performance and has longer working life. We are a renowned disc polishing machine manufacturer and supplier in india.

We are offering metallurgical mounting press.After cutting the specimen, the next step is mounting. The aim of mounting is to handle small or odd shaped specimens and to protect fragile materials, thin layers or coating during preparation as well as to provide good edge retention. Mounting produces specimens with uniform size so that it is easier to handle in automatic holders for further preparation steps. Basically, two methods are available: hot mounting, cold mountingin hot mounting, the specimen is mounted under heat and pressure with a hot mounting press.Cold mounting is preferred for samples which are sensitive to damage from heat and pressure (like coatings, pcb, etc.) cold mounting resins are easy to use and require mixing which is then poured into a mould and allowed to set.

We are offering salt spray chambers.The salt spray test is a standardized and popular corrosion test method, used to check corrosion resistance of materials and surface coatings. Usually, the materials to be tested are metallic and finished with a surface coating which is intended to provide a degree of corrosion protection to the underlying metal. Salt spray testing is an accelerated corrosion test that produces a corrosive attack to coated samples in order to evaluate (mostly comparatively) the suitability of the coating for use as a protective finish. The appearance of corrosion products (rust) is evaluated after a pre-determined period of time.

Due to a vast industry experience and profound knowledge, we have emerged as a prevalent Manufacturer and Supplier of Dry Belt Grinders. We offer various types of Dry Belt Grinders, as per the typical requirements of the client. These are completely in accordance with the set industrial standards and norms. We adopt the updated techniques and methods for manufacturing them. Our offered Dry Belt Grinders are highly appreciated for their robust construction, optimum functionality, efficient performance, and long service life.

Details :

• Belt width up to 200 mm
• Also available with dust collector
• Dust collector open & enclosed types
• Various types of dry belt grinders

We are the leading Manufacturers and Suppliers of Leak Detection Setup for Cylinder Head. Our entity is based in Pune, Maharashtra, India. It is known for its prompt detection and great performance. Our offered Leak Detection Setup for Cylinder Head is easy to operate and demands the least of maintenance. We manufacture it in compliance with the set industrial standards and norms. We offer it to various industries, all over the country. Our Leak Detection Setup for Cylinder Head is available at a highly affordable price.

Details :

• We provide such set ups & complete systems for leak detection.
• This is required for Cylinder Heads, Cylinder Blocks, Tubes, Enclosures, and Silencers etc.

We are a major Manufacturer and Supplier of Lathe Tool Dynamometer in Maharashtra, India. We manufacture it with the aid of advanced techniques and methods. We are well-equipped with the machines and equipment, which are required for fabricating it. It is known for its accurate results, robust construction, and long operational life. We are well-capacitated to furnish it in bulk quantities, within the given time frame.

Details :

• It is an Educational Aid.
• It indicates that we should also undertake such Educational Aid related development projects.

We are a significant Manufacturer and Supplier of Metallurgical Microscopes in Pune, Maharashtra, India. We manufacture is as per the predefined industrial standards and norms. We are well-capacitated to deliver them in bulk quantities, within the stipulated time frame. Our offered Metallurgical Microscopes are highly acknowledged for their great performance, robust structure, and long operational life. We supply all types of metallurgical microscopes, including the inverted / erect stage.

Details :

• Magnification: Max. Up to 900 X
• Computer interface attachment to get instant photographs
• Powerful image analyser software can be supplied with above attachment

We are an experienced Manufacturer and Supplier of Mechanical & Electronic Mechanical Extensometer. Our entity is based in Pune, Maharashtra, India. We offer this machine in two models, namely EM-1 i.e. Mechanical Extensometer & EE-2 i.e. Electronic Mechanical Extensometer.  The EM-1 is used for measuring the elongation of the test specimen under load, to have its mechanical properties. Whereas, the EF-2 is used with the Universal Testing Machines for carrying out the tension test. It is used for measuring young's modulus, proof stress or yield stress.

Mechanical Extensometer

• It is essential to measure the elongation of test specimen under load, to have it's mechanical
• properties. FIE Extensometer Model EM-1 is intended to serve the above purpose.

 

Construction & Application :

• This consists of two long knife edges at top, two dial indicators and lower knife edges to actuate
• the dials. The bars are pressed against the speciman by means of clamps
• So that the knife edges bite the specimen to avoid any slip. The upper edges are adjustable to
• provide different guages lengths for measurement. As deformation takes place the lower knife
• edges transfer the movement to the dial guages and the deformation of specimen is shown on
• dials, so that the change in length of specimen by 1/100mm, equals to one division of the
• graduation on dial.

Our noteworthy entity is rigorously engaged in manufacturing and supplying a qualitative range of Electronic Universal Testing Machine Servo Hydraulic. We are based in Pune, Maharashtra, India. It is sourced from the best quality components and latest techniques.

 

Features :

• Motorised Control Valve.
• Load accuracy as high + 1%.
• Straining at variable speeds to suit a wide range of materials.
• Printer & PC graphs enable to study the behaviour of the material.
• Motor drove threaded columns for quick effortless adjustment of middle crosshead to facilitate rapid fixing of the test specimen.
• Simplicity in reading because of digital readouts.
• A wide range of standard and special accessories.
• Easy change from plain to threaded and screwed specimens.
• A Large effective clearance between columns enables testing of standard specimens as well structures.
• Simple controls for ease of operation.
• Robust training frame of an extremely rigid construction.
• Fully enclosed and protected pressure transducer.
• RS 232 serial port for PC control of m/c.
• Applications-
• Electronic Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse, and shear loads. Hardness test on metals can also be conducted.

We are offering erichsen cupping machine.The erichsen cupping test is a ductility test, which is employed to evaluate the ability of metallic sheets and strips to undergo plastic deformation in stretch forming. The test consists of forming an indentation by pressing a punch with a spherical end against a test piece clamped between a blank holder and a die, until a through crack appears. The depth of the cup is measured.

We are a well-reckoned Manufacturer and Supplier of Automatic Cutoff Machines in Maharashtra, India. Abrasive cut-off machines are used for a burn free cutting of metallic samples for spectroscopic & microscopic examination. The entire range of our Automatic Cutoff Machine undergoes a series of quality checks before the final delivery.

Details :

• Abrasive cut-off machines used for burn free cutting of metallic samples for spectroscopic & microscopic examination.
• Assured burn free cut faces from tractor axels to 2 mm diameter niddles are in use for more than32 years.
• Cut capacity up to 150 mm.
• Models – manual, semiautomatic & fully automatic with various cut capacities.
  

We are highly engrossed in Manufacturing and Supplying of Automount. We carry out our operations from Pune, Maharashtra, India. We are backed by a team of dexterous professionals, who manufacture it by using the supreme grade materials and pioneering techniques. Our clients highly praise its sturdy construction, perfect finish, long operational life, and smooth functionality. We are competent to take bulk quantity orders for this machine. We offer Automount machine at a highly affordable price.

Details :

• It is a mounting press for metallurgical specimen mounting
• Models – manual, semi-automatic & fully automatic

We are a well-reputed Manufacturer and Supplier of Double Disc NVF in Pune, Maharashtra, India. We use the best quality components and updated techniques for manufacturing it. Our offered Double Disc NVF is packed in a high-quality packing material, to avoid the chances of mishandling during its transportation. It is burdened with various attributes like sturdy structure, perfect finish, and optimum functionality.

Details :

• Table top double disc polishing machine with variable D.C. motor
• Quick change facility
• One piece basin for clean rust free working area

Our trustworthy organisation is thoroughly engaged in manufacturing and supplying Double Disc. We are based in Pune, Maharashtra, India. Our offered Double Disc is highly acknowledged for its dimensional accuracy, perfect finish, great performance, and long operational life. Our deft professionals manufacture it with a high level of precision. We have a great reputation for making timely deliveries of our consignments.

Details :

• Table top single disc polishing machine
• Variable speed from 150 to 1200 rpm
• For grinding & polishing microscopic inspection of metals, ceramics

The clients can avail from us the efficient assortment of disc polishing machine, which incorporates the advanced features and technology. The range of our disc polishing machine comprises of double disc and single disc machines. Our disc polishing machine is efficient in performance and has longer working life. We are a renowned disc polishing machine manufacturer and supplier in india.

We are offering metallurgical mounting press.After cutting the specimen, the next step is mounting. The aim of mounting is to handle small or odd shaped specimens and to protect fragile materials, thin layers or coating during preparation as well as to provide good edge retention. Mounting produces specimens with uniform size so that it is easier to handle in automatic holders for further preparation steps. Basically, two methods are available: hot mounting, cold mountingin hot mounting, the specimen is mounted under heat and pressure with a hot mounting press.Cold mounting is preferred for samples which are sensitive to damage from heat and pressure (like coatings, pcb, etc.) cold mounting resins are easy to use and require mixing which is then poured into a mould and allowed to set.

We are offering salt spray chambers.The salt spray test is a standardized and popular corrosion test method, used to check corrosion resistance of materials and surface coatings. Usually, the materials to be tested are metallic and finished with a surface coating which is intended to provide a degree of corrosion protection to the underlying metal. Salt spray testing is an accelerated corrosion test that produces a corrosive attack to coated samples in order to evaluate (mostly comparatively) the suitability of the coating for use as a protective finish. The appearance of corrosion products (rust) is evaluated after a pre-determined period of time.

Due to a vast industry experience and profound knowledge, we have emerged as a prevalent Manufacturer and Supplier of Dry Belt Grinders. We offer various types of Dry Belt Grinders, as per the typical requirements of the client. These are completely in accordance with the set industrial standards and norms. We adopt the updated techniques and methods for manufacturing them. Our offered Dry Belt Grinders are highly appreciated for their robust construction, optimum functionality, efficient performance, and long service life.

Details :

• Belt width up to 200 mm
• Also available with dust collector
• Dust collector open & enclosed types
• Various types of dry belt grinders

We are the leading Manufacturers and Suppliers of Leak Detection Setup for Cylinder Head. Our entity is based in Pune, Maharashtra, India. It is known for its prompt detection and great performance. Our offered Leak Detection Setup for Cylinder Head is easy to operate and demands the least of maintenance. We manufacture it in compliance with the set industrial standards and norms. We offer it to various industries, all over the country. Our Leak Detection Setup for Cylinder Head is available at a highly affordable price.

Details :

• We provide such set ups & complete systems for leak detection.
• This is required for Cylinder Heads, Cylinder Blocks, Tubes, Enclosures, and Silencers etc.

We are a major Manufacturer and Supplier of Lathe Tool Dynamometer in Maharashtra, India. We manufacture it with the aid of advanced techniques and methods. We are well-equipped with the machines and equipment, which are required for fabricating it. It is known for its accurate results, robust construction, and long operational life. We are well-capacitated to furnish it in bulk quantities, within the given time frame.

Details :

• It is an Educational Aid.
• It indicates that we should also undertake such Educational Aid related development projects.

We are a significant Manufacturer and Supplier of Metallurgical Microscopes in Pune, Maharashtra, India. We manufacture is as per the predefined industrial standards and norms. We are well-capacitated to deliver them in bulk quantities, within the stipulated time frame. Our offered Metallurgical Microscopes are highly acknowledged for their great performance, robust structure, and long operational life. We supply all types of metallurgical microscopes, including the inverted / erect stage.

Details :

• Magnification: Max. Up to 900 X
• Computer interface attachment to get instant photographs
• Powerful image analyser software can be supplied with above attachment