Master Abrasives

UKT Hills, Hubli, Karnataka

To make sure that we offer only defect-free range of products, our quality experts cross check every product at diverse stages. Ours is a well-established firm located in Hubli(India) and engaged in the business of providing a wide assortment of quality products.

We are a prime Manufacturer, Exporter & Supplier of Fiberglass Reinforced Cut Off Wheels. Extensively used for cutting of ferrous and non-ferrous metals, these wheels are known for their sturdy structure, durability and high tensile strength. Our Fiberglass Reinforced Cut Off Wheels are specially reinforced and designed with high tensile fiber glass discs for resisting any breakage caused by heavy cross bending. These Fiberglass Reinforced Cut Off Wheels can be used for any operation where work is not clamped and deepness of cut is on the higher side. Our Fiberglass Reinforced Cut Off Wheels are available in different full sizes and can be customized as per the clients requirements. Sizes & Specifications :

• 63 x 2.5 x 10mm A46 T Bf
• 100 x 3 x 16mm A30 R Bf
• 100 x 3 x 12.7 mm A30 R Bf
• 100 x 2 x 16mm A30 R Bf
• 100 x 1.6 x 16mm A46T Bf (Extra Thin wheels)
• 125 x 3 x 22.23mm A30 R Bf
• 125 x 2 x 22.23mm A30 R Bf
• 125 x 1.6 x 22.23mm A46 T Bf (Extra thin wheels)
• 180 x 3 x 22.23mm A30 R Bf
• 180 x 2 x 22.23 A30 R bf
• 180 x 3.2 x 22.23mm A30T Bf
• 230 x 3.2 x 22.23mm A30 T Bf
• 230 x 2 x 19.05mm A46 T Bf
• 230 X 1.9 x 22.23mm A46T Bf (thin wheels)
• 230 x 4 x 22.23mm C30
• 300 x 3 x 25.4 mm A30 Q bf
• 300 x 2 x 25.4 mm A 36 T Bf
• 350 x 3.2 x 25.4mm A30 Q Bf
• 350 x 3.2 x 25.4mm A30 T Bf
• 400 x 4 x 25.4mm A30 T Bf
• 500 x 5 x 40mm A30 T Bf

 

Details :

• Established in the year 1985, we Master Abrasives are a certified company engaged in manufacturing and supplying of Fiberglass Reinforced Cut Off Wheels. We use quality material and modern machines during the making of these wheels. Extensively used for cutting of ferrous and non ferrous metals, these wheels are known for their sturdy structure, durability and high tensile strength. Apart from this we are offering Fiberglass Reinforced Cut Off Wheels to out clients at economical prices.
• We are catering Fiberglass Reinforced Cut Off Wheels are specially reinforced and designer for resisting any breakage caused by heavy cross bending. These resin bonded wheels can be used for any operation where work is not clamped and deepness for cut is on the higher side. Our abrasive grinding wheels are available in different full sizes and can be customized as per the clients requirement.
• Reinforced Cut Off Wheels are reinforced with high tensile fiber glass discs and are designed to resist breakage caused by heavy cross bending. These can be used for any operation where work is not clamped and depth of cut is on the higher side. Master cut Off Wheels are available in the foll standard sizes. We also offer customized sizes of cut off wheels as per the customers requirements.

Relying on the technical expertise & profound knowledge of our team, we have been successful in carving a niche for ourselves as a prominent Manufacturer, Exporter & Supplier of Depressed Centre Wheels. These Depressed Centre Wheels are immensely used in various surface grinding applications like cleaning of casting risers. Quality inspection of Depressed Centre Wheels helps in removal of welded radius and descaling after cutting and welding. We offer Depressed Centre Wheels in varying diameters of 4 A, ½ in different thickness. Master cut DCDs are reinforced with high tensile fibre glass reinforcements and hence are able to withstand extreme loads exerted by grinding applications, with utmost safety. These Depressed Centre Wheels, available in different sizes and grades, can be customized as per the requirements of the clients. Sizes & Specifications :

• 100x4x16mm A24 (for general applications)
• 100 x 6 x 16mm A24 (silicon, C-60, C-80, C-100 Glass wheel)
• 125 x5x22.33mm A24
• 125x7x22.33mmA24
• 180x7x22.23mm A 24
• 230x7x22.23mm C24
• 100 x 4 x 16mm A 24 S.S. (for stainless steel fabrication)
• 180 x 7 x 22.23mm A24 S.S. (for stainless steel fabrication)

Persistently marching in today's competitive market, our company is recognized as one of the well established manufacturer & supplier of Portable Snagging Wheels. These wheels are widely used for off hand grinding in forging units and foundries. We do not compromise with the quality of these wheels, so we use quality tested base material during manufacturing process. Known for their rugged design long service life and inapreciable performance, our Portable Snagging Wheels are high in demand.
We are fabricating Portable Snagging Wheels that are at per with international standards. These resign bonded grinding wheels and resin bonded abrasive wheels are widely used for off hand grinsing in foundries and forging units. Our Snagging Wheels are available in Aluminium Oxide (A16) and Silicon Carbide (C16) grades.
We offer Portable Snagging Wheels that are at par with international standards. these resin bonded grinding wheels are widely used for grinding application in foundries and forging units. Master Cut Snagging Wheels are available in Aluminium Oxide (A16) and Silicon Carbide (C16) grades, we made Taper Cup wheel, cup wheel and segment.

Sizes & Specifications :

• 63 x 16 x 9.53mm
• 100 x 20 x 12.7mm
• 150 x 20 x 15.86mm
• 300 x 14 x 38.10mm
• 150 x 25 x 15.88mm
• 200 x 25 x 15.88mm
• 350 x 50 x 50.1mm

We are one of the leading Manufacturers, Exporters and Suppliers of Swing Frame Wheels. These Swing Frame Wheels are broadly used in steel industries and appreciated for their rugged design, durability and unmatched performance. Our Swing Frame Wheels are widely used for snagging applications in foundries and casting units. These wheels are available in different full sizes and are available in both aluminum oxide (A16) and silicon carbide (C16) grades. Applications :

• Smoothening of weld seams
• Cleaning of castings
• Surface preparation for plating, painting, billet conditioning.

Sizes & Specifications :

• 300x 40 x50.8mm
• 350 x 50 x 50.8mm
• 400 x 50 x 152.4mm
• 400 x 50 x 50.8 mm
• 400 x 63 x 152.4mm
• 450 x 50 x 152.4mm
• 450 x 50 x 50.8mm
• 500 x 75 x 203.2mm

Backed by the well equipped infrastructure facilities and experienced personnel, our company has emerged as one of the well established manufacturers & suppliers of Non Reinforced Cut Off Wheels. We use quality components dusring the manufacturing of these wheels. Owing to their superior finish, dimensional accuracy and less maintenance, these cut off wheels are high in demand across the market. Our Non Reinforced Cut Off Wheels are used in various industrial for cutting and parting purpose.
We are exporter and manufacturer of Non Reinforced Cut Off Wheels that are used for cutting and parting applications in the tool room and Heat treatment plants. We offer specialized and customized plain cut off wheels by studying the customers requirements.
Plain cut off wheels are used for cutting and parting applications in the tool room and Heat treatment plants, We offer specialized and customized pelamin cut off wheels by studying the customers requirement. We specialize in manufacturing cut off wheels for burn free cutting and high precision application. Master Cut Plain Cut Off Wheels are available in A60, C60 & WA80 grades in the for standard sizes. Customized sizes are also available as per customer requirements.

Sizes & Specifications :

• 150 x 0.8 x 31.75 mm
• 150 x 1 x 31.75 mm
• 150 x 3 x 31.75 mm
• 200 x 1.5 x 31.75 mm
• 250 x 0.8 x 31.75 mm
• 300 x 2 x 31.75 mm
• 350 x 2.5 x 31.75 mm
• 400 x 3 x 31.75 mm

Buy the best quality resin bonded wheels at rock-bottom prices from us. We are a reckoned name in the town We are a quality-conscious firm and for ensuring high quality of the products, we dedicatedly work in tune with the defined industry standards.