We are offering plug flow reactor.in an ideal plug flow reactor (pftr) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction: this set-up is used to study a non-catalytic homogeneous reaction under ambient condition. the set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of chemicals. The flow rate can be adjusted by operating the needle valves provided on respective rotameter. The magnetic drive pump is used for circulation of feed. A straight tube type reactor kept horizontally and inclined upward at outlet from where samples are collected for analysisexperimentssponification reaction study in straight tube plug flow reactor. to determine reaction rate constantutilities requiredwater supply & draininstruments, laboratory glassware and chemicals required for analysis as per the system adopted

we are offering plug flow reactor(cre-13). real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from ideality can be due to channeling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. to predict the exact behavior of a vessel as a chemicals reactor, rtd or stimulus response technique is used. the setup consists of one feed tank through which water is fed to the reactor. the flow rate can be adjusted by operating the needle valve and measured by rotameter. the magnetic drive pump is used for circulation of feed. it is a helical coil tube type plug flow reactor made up of stainless steel pipe. reactants enter at lower end coming out of the top of coil from where samples are collected for analysis. for understanding the rtd characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe is providedexperimentsto plot rtd curve for plug flow reactorto determine the dispersion noutilities requiredwater supply & draininstruments, laboratory glassware and chemicals required for analysis as per the system adopted

The setup is designed to demonstrate principles of distillation in a Packed Column.

The column is made of Stainless Steel material packed with Borosilicate Glass rasching rings. An electrically heated re-boiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapors form the top of column are condensed in the shell and tube type condenser by circulating cooling water and it is supplied by laboratory overhead tank.

The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is done for pressure & temp measurement wherever is necessary

Experiments

• To study the Packed Distillation Column

Features

• Stainless Steel tanks and wetted parts
• Superb Painted structure
• Simple to operate & maintain
• Compact & stand alone set up

Utilities Required

• Water Supply 2 LPM at 5 m head
• Drain
• Electricity Supply: 1Phase, 220 V AC, 6.5 kW
• Required Chemicals
• Refractrometer for analysis

In an ideal Plug Flow Reactor PFTP there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in coil tube type plug flow reactor. This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition.

The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The magnetic drive pump is used for circulation of feed. It is a helical coil tube type reactor kept in a constant temperature water bath to conduct the experiment at various temperatures. Reactants enter at lower end coming out of the top of coil from where samples are collected for analysis.

Experiments

• Sponification Reaction study in Isothermal Plug flow Reactor
• To determine Reaction Rate Constant and effect of temperature on it

Utilities Required

• Water Supply & Drain
• Electricity-I.5kw, Single
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted

In an ideal Plug Flow Reactor PFTP there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in coil tube type plug flow reactor. This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition.

The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The magnetic drive pump is used for circulation of feed. It is a helical coil tube type reactor. Reactants enter at lower end coming out of the top of coil from where samples are collected for analysis

Experiments

• Sponification Reaction Study in straight tube Plug Flow Reactor.
• To determine Reaction Rate Constant

Utilities Required

• Water Supply & Drain
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted

We are offering plug flow reactor.in an ideal plug flow reactor (pftr) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction: this set-up is used to study a non-catalytic homogeneous reaction under ambient condition. the set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of chemicals. The flow rate can be adjusted by operating the needle valves provided on respective rotameter. The magnetic drive pump is used for circulation of feed. A straight tube type reactor kept horizontally and inclined upward at outlet from where samples are collected for analysisexperimentssponification reaction study in straight tube plug flow reactor. to determine reaction rate constantutilities requiredwater supply & draininstruments, laboratory glassware and chemicals required for analysis as per the system adopted

we are offering plug flow reactor(cre-13). real reactors do not satisfy the idealized flow patterns, back mix flow or plug flow deviation from ideality can be due to channeling of fluid through the vessel, recycling of fluid within the vessel or due to the presence of stagnant region or pockets of fluid in the vessel. to predict the exact behavior of a vessel as a chemicals reactor, rtd or stimulus response technique is used. the setup consists of one feed tank through which water is fed to the reactor. the flow rate can be adjusted by operating the needle valve and measured by rotameter. the magnetic drive pump is used for circulation of feed. it is a helical coil tube type plug flow reactor made up of stainless steel pipe. reactants enter at lower end coming out of the top of coil from where samples are collected for analysis. for understanding the rtd characteristics, a special arrangement to inject tracer into the lower end of reactor, using a syringe is providedexperimentsto plot rtd curve for plug flow reactorto determine the dispersion noutilities requiredwater supply & draininstruments, laboratory glassware and chemicals required for analysis as per the system adopted

The setup is designed to demonstrate principles of distillation in a Packed Column.

The column is made of Stainless Steel material packed with Borosilicate Glass rasching rings. An electrically heated re-boiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapors form the top of column are condensed in the shell and tube type condenser by circulating cooling water and it is supplied by laboratory overhead tank.

The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is done for pressure & temp measurement wherever is necessary

Experiments

• To study the Packed Distillation Column

Features

• Stainless Steel tanks and wetted parts
• Superb Painted structure
• Simple to operate & maintain
• Compact & stand alone set up

Utilities Required

• Water Supply 2 LPM at 5 m head
• Drain
• Electricity Supply: 1Phase, 220 V AC, 6.5 kW
• Required Chemicals
• Refractrometer for analysis

In an ideal Plug Flow Reactor PFTP there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in coil tube type plug flow reactor. This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition.

The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The magnetic drive pump is used for circulation of feed. It is a helical coil tube type reactor kept in a constant temperature water bath to conduct the experiment at various temperatures. Reactants enter at lower end coming out of the top of coil from where samples are collected for analysis.

Experiments

• Sponification Reaction study in Isothermal Plug flow Reactor
• To determine Reaction Rate Constant and effect of temperature on it

Utilities Required

• Water Supply & Drain
• Electricity-I.5kw, Single
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted

In an ideal Plug Flow Reactor PFTP there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. In case of a coil turbulence is introduced due to frequent change in direction of flow and presence of secondary flow, so a higher value of reaction rate constant is expected in coil tube type plug flow reactor. This set-up is used to study a non-catalytic homogeneous reaction under isothermal condition.

The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The magnetic drive pump is used for circulation of feed. It is a helical coil tube type reactor. Reactants enter at lower end coming out of the top of coil from where samples are collected for analysis

Experiments

• Sponification Reaction Study in straight tube Plug Flow Reactor.
• To determine Reaction Rate Constant

Utilities Required

• Water Supply & Drain
• Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted