Other Products / Services #8097829

Weight : 0.136 Kg

Voltage : 100-240 VAC

Technology : HP TIJ 2.5

Printheads : F-Type Printheads

Dimensions : 167 x 130 x 18 mm

Print Height : Up To 101.6 mm (4 Inch)

Voltage : 100-240 VAC

Technology : HP TIJ 2.5

Print Distance : 0.5-2.0 mm

Print Height : Up To 50.8 mm

Printheads : 1 Or 2 Pen MK-Printheads

Portable : Yes

Condition : New

Application : Industrial

Power Source : Electric

Automatic Grade : Automatic

Condition : New

Finish : Polished

Power Source : Electric

Automatic Grade : Automatic

Application : For Pharma Packaging

Mechanism: Laser

User-friendly.

Convenient

High safety features.

Origin: India.

Flawless marking results.

Economical price.

Fast shipment.

Product color: Green

Mechanism: Pneumatic

Marking type: Roll Marking

Made in India

Easy to install & operate

Low running cost.

Exclusive price.

Each Marking wheel has 11 faces with 0 to 9 figures

Wheels can be rotated to any position

No loose parts

Heat treated and dull - Nickel plated

Usage: Office, Commercial

Precision designed cutting edge geometry for clear and long lasting marking.

Reduce stress concentration on the marked surfaces.

Control hardening and tempering process.

Make sure marking reliability and longer service life.

Low prices.

Timely delivered.

Deal in : New

Least maintenance needed.

User friendly.

Prolonged service life.

Comes in various grades.

Easy to operate.

Rigidly fabricated, reinforced steel frame.

Stress relieved.

Can mark round work piece up to 200 mm diameter.

Long lasting life.

Low maintenance needed.

Label Capacity: Up to 100 mm deep and 200 mm wide

LABEL Thickness: 0.3 mm to 2.5 mm

Marking Limits: 10 mm minimum and 95mm

Maximum from top edge of label

Table Size: 240x90 mm

Table Travel: 125 mm from right to left

Characters On: A thru 'Z

Dial Wheel: 0 thru 9 .-/&

Net Weight: 15kg

Condition : New

Quality : High

Suitable for : Part Numbering, Batch

Types Made : High Quality Tool Steel

Application : Industrial

Place of Origin : Chennai

We are an eminent organization in this domain and are involved in presenting an enormous quality range of Fiber Laser Marking Machine. This Fiber Laser Marking Machine is manufactured using high quality material that is sourced from reliable vendors of the market. Also, these products are affordable in prices.

Other information:

F-Series - FQ50, FQ30, FQ20 and FQ10

Specifications:

Compliance: CDRH, CE, CSA, UL

Wavelength: 1, 060nm

Laser Type: Q-Switched Ytterbium Fiber Laser

Average Power FQ50/30/20/: 10 50/30/20/10W

Peak Power FQ10 >4kW

Peak Power FQ50/30/20 :> 8kW

Beam Quality FQ50/30/20/10:M2

Fiber Length FQ10: 5 meters (16.4ft.) Std.

Fiber Length FQ50/30/20: 3 meters (9.8ft.) Std.

Long Term Power Drift: < /- 5%

Optical Isolator: Standard

Positioning: Visible Red Diode Light

Mounting Weight: 6.8kg (15lbs)

Marking Head Dimensions: 51.0 (L) x 12.7 (W) x 14.0 cm (H)

Dimension with Selected Lens (H):

(20.1 x 5.0 x 5.5 in.)

(100mm: 14.4cm (5.7 in.)

(160mm: 14.2cm (5.6 in.)

(163mm: 15.8cm (6.2 in.)

(254mm: 17.2cm (6.8 in.)

(330mm: 17.8cm (7.0 in.)

(350mm: 15.9cm (6.3 in.)

(420mm: 17.8cm (7.0 in.)

Model 6 Controller Dimensions: 42.7(W) x 14.5(H) x 50.8 cm(D) (16.8 x 5.7 x 20.0in.)

Laser Marking Head Cable: 5m (16.4ft.), detachable

Laser Extension Cable: 3m (10.0ft.), detachable

Input Power (Selectable): 95-250VAC, 50/60Hz

Maximum Power Consumption FQ50: Less than 400W

Maximum Power Consumption FQ30: Less than 280W

Maximum Power Consumption FQ20: Less than 250W

Maximum Power Consumption FQ10: Less than 200W

Cooling: Air Cooled, Fan/Filter

Operating Temperature Range: 15 to 35C (55 to 95F)

Humidity: 10% to 85% Non-condensing (no water cooling required)

Speed and flexibility

for machine tending

operation in confined

workspaces

High speed and

repeatability for

maximum productivity

Compact design for

enhanced configuration

flexibility

C4-

A901

long

arm

model also available

VT6LS

Simple setup and high cost-performance

for easy and affordable automation

Space-saving design with built-in controller

6-axis versatility without complicated setup

1 OOV-240V power source compatibility

Hollow wrist construction for internal

cabling

Batteryless motor unit for reduced

maintenance

Brake

CBI:

Arm length

Mounting type

Table Top Mounting

Ceiling Mounting

Wall Mounting

Environment

Standard model

Cleanroom model

Protection model (IP67)

Payload

Specifications

VT6-A901Cl

Model name VT6L

Model number

Payload (Load)" Rated 3 kg

Max. 6 kg

Max. reach P point center 920 mm

Joint#l -5 flange surface 1000 mm

Repeatability Joint#l -6 0.1 mm

Max. motion range2 166.2 deg/sec

122.5 deg/sec

J3 141.2 deg/sec

J4 Standard, Cleanroom 268.7 deg / sec, Protection-model 188.1 deg/sec

296.8 deg/sec

293.2 deg/sec

Allowable moment

of inertia*'

Joint#4 0.3 kgm2

Joint#5 0.3 kgm2

Joint#6 0.1 kgm2

Mounting type" Table top / Ceiling/ Wall mount

Environment spec Standard, Cleanroom" / Protection-model (IP67)

Weight (cables not included) 40 kg

Applicable Controller Built-in controller

Installed wire for customer use None (External Wiring Option availabe)

Installed pneumatic tube for customer use None (External Wiring Option availabe)

Power ACIOO-240 V single phase

Power Consumption" 1.2 WA

Cable length

I/O Standard I/O In 24, Out 16 (Non polarity)

Remote I/O Out 8 (Remote function assigned to standard I/O)

Safety standard

1 : Do not apply the load exceeding the maximum payload.

2 : In case of PTP control

3 : If the center of gravity is at the center of each arm. If the center of gravity is not at the center of each arm, set the eccentric quantity using INERTIA command.

4 : Manipulators are set to "Table Top mounting" at shipment. To use the manipulators by other installation coordination, need to change the model settings on RC+ software. (Clean room & Protection models require table top

mo

5 : Complies with ISO Class 5 (IS014644-1) and older Class 1 cleanroom standards.

6 : It depends on operating environment and operation program.

Series

Exclusive Epson technology ensures high speed

and low vibration with heavy payloads

Ideal for multi-effector pick-and-place with

multiple workpieces, and for handling and

assembly tasks with heavy payloads

C8XL

Long, slim, 1400mm arm for machine

tending operation

Long, slim arm minimizes interference with

nearby machinery and can reach into narrow

spaces Low weight and compact design greatly

increase configuration flexibility

M/C cable exit direction

: Cleanroom & ESD (electrostatic discharge) model

CFA: Protection model (IP67)

Specifications

Model name C8L C8XL

Model number C8-A701DCl C8-A901C]ClC] C8-A1401DClCll

Max. motion range 711 mm 901 mm 1400 mm

Wrist flange surface 791 mm 981 mm 1480 mm

Payload" Rated 3 kg

Maximum 8 kg

Repeatability Joints #1-#6 0.02 mm 0.03 mm 0.05 mm

Standard cycle time'l 0.31 sec 0.35 sec 0.53 sec

Max. operating speed Joint #1 331 deg/sec 294 deg/sec 200 deg/sec

Joint #2 332 deg/sec 300 deg/sec 167 deg/sec

Joint #3 450 deg/sec 360 deg/sec 200 deg/sec

Joint #4 450 deg/sec

Joint #5 450 deg/sec

Joint #6 720 deg/sec

Allowable moment of

inertia

Joint #4 0.47 kgm 2

Joint #5 0.47 kgm 2

Joint #6 0.15 kgm 2

Installation environment Standard/Cleanroom3 &ESD

Table

Mounting type

Weight (cable not included) 49 kg (IP:53 kg) 52 kg (IP:56 kg) 62 kg (IP:66 kg)

Applicable Controller RC700-A

Installed wire for customer use 15 pin (D-sub) , 8 pin (RJ45) , 6pin (for force sensor)

Installed pneumatic tube for customer 06 mm x 2/Allowable pressure: 0.59 Mpa (6 kgf/cm 2 )

AC200-240 V Single phase

Power Consumption" 2.5 WA

Cable length 3 m/5 m/10 m/15 m/20 m

Safety standard

1: Cycle time based on round-trip arch motion (300 mm horizontal, 25 mm vertical) at each payload setting (path coordinates optimized for maximum

speed) '2: When payload center of gravity is aligned with Joint #4 ; if not aligned with Joint #4, set parameters using INERTIA command.

3: C8 and C8L comply with ISO Class 3 (IS014644-1) cleanroom standards (comparable to previous Clean Class 1: fewer than 10 particles with a diameter grea5ter than 0.1 pm per 28317cm3:1cft in operating area air

sample) C8XL complies with ISO Class 4 (IS014644-1) cleanroom standards (comparable to previous Clean Class 10: fewer than 100 particles with a diameter greater than 0.1 pm per 28317cm3:1cft in operating area

air sample) *4: Ceiling- and wall-mounted robots should be programmed using the EPSON RC+ software ceiling- or wall-mount settings. *5: Varies according to operating environment and program.

High Payload and High Speed Peformance

High Rigidity Arm = Ultra High Speed

Tabletop, Ceiling and Wall Mount Models

ISO Clean & ESD Compliant Models

IP54 and IP65 Washdown/Dustproof Models

Also available in 850mm arm length

Epson G10 SCARA robots take advantage of Epson's new high rigidity arm design to

now bring both high payloads AND high speed together in one package. Most robots

available today that promise higher payloads do so with extremely reduced cycle

times and poor duty cycles. The G10 SCARA robots were designed to pack on a

heavy payload and then run at high speeds 24/7. G10 SCARA's are perfect for

higher payload applications such as machine load/unload, palletizing, mechanical

assembly, pick and place applications, food handling and hundreds of other

applications. With applications running in demanding industries such as Automotive,

Medical, Semi Conductor, Food, Pharmaceutical, Consumer, and many others,

Epson G10 SCARA's deliver the high performance required for todays demanding

applications.

G10 SCARA arms are available in 650 and 850mm lengths with either 180 (150

clean) or 420 (390 clean) Z-Axis lengths. They are also available in table top , wall or

ceiling mount configurations. Clean/ESD, Washdown and Dustproof models are also

available. That makes for a lot of choices to make sure you get the right robot for

your next application.

G10 SCARA robots incorporate the new Max-E work envelope design. With Max-E,

Epson G-Series SCARA robots are able to do jobs that previously required 50mm or

more of additional reach. Smaller footprints are what make this happen and that

translates to less factory space requirements and less overall factory costs.

We are the foremost company for providing Interchangeable Steel Type to

the clients. Offered range is properly engineered under the guidance of our

skilled professionals. This product is perfect for part numbering and

specification marking on steel, aluminum, brass and other related items.

Interchangeable Steel Type is checked to eradicate all flaws.

With special holders

Features:

Suitable for part numbering, batch and date Coding, etc. on Steels,

Casings, Forgings, Aluminum, Brass, Plastics, Paper.

Types made from High Quality Tool Steel

Letters and Numbers formed by unique Cold forming process for long

tool life

Dull Nickel plated for rust free long shelf life.

Bevel Angles, Character Depth and Bradma Calligraphy to maximize

type life

Sets are available with or without Holder.

All dimensions are to very close tolerances, for the clearest uniform

impression in perfect alignment when Types are assembled in Holder

• High speed up to six pins marking simultaneously

• Marking windows up to 0.625 x 4.5 (16mm x 114mm)

• Marks a wide range of materials from soft plastics to hardened steel up to Rc60

• Available with a variety of marking pin cartridge configurations for the optimal combination of character size, marking depth, marking window size and cycle time

• Compact, rugged X/Y positioning mechanism

• The right choice for many VIN (Vehicle Identification Number) Marking Applications

• Self-contained, state-of-the-art TMC470 controller features two serial ports, USB and Ethernet ports

• 1-1/2 x 2-1/2 (38.1mm x 63.5mm) marking window

• Rugged, low-maintenance X/Y platform

• Compact Marking Head approximately 6.6 x 6.2 x 4.7 (168mm x 158mm x 120mm)

• Marks a wide range of material from soft plastics to hardened steel up to Rc60

• Shutter assembly protects marking head from solid and liquid contaminants

• Self-Contained, state-of-the-art TMC470 controller features two serial ports, USB port and Ethernet port.

• Dot density up to 200 dots-per-inch (79 dots-per- centimeter)

• Choice of interchangeable marking pin types for depths from 0.001 - 0.018 (0.03mm - 0.45mm)