Manshu Comtel Pvt Ltd

Mahim, Mumbai, Maharashtra

M-13 cabinets are used in various industries to house drives, plcs, inverter/ups systems, instrumentation panels etc. These are also used for electrical control panels with switchgears for mccs, pdbs etc. Similarly, power factor controls panels with capacitors find m-13 as the best option for their design.

We offer Mce compact enclosures are used in various industries to house small drives, plcs, inverter / ups systems, instrumentation panels etc. These are also used for electrical control panels with switchgears for pdbs, mcb dbs etc. They are widely used by machine manufacturers to mount control scheme, contactor logic etc. Types we manufacture 3 types of mce compact enclosures various sizes. single door on front and rear closed double door on front and rear closed customized as per need construction 1. Main body: is made of 1.5 / 2 mm crca sheet. Color: siemens grey ral7032 powder coated color: satin black 2. Plinth: 75/100/200 mm color: satin black (if required or wall mounting bracket) 3. Doors: 1.5mm 0r 2mm as needed. Color: siemens gary ral7032 powder coated 4. Mounting plate: 2 or 3 mm thick, color: orange powder coated or zinc plated or hot dip galvanized 5. Locks: four point lock with handle & key or cam lock 6. Cutouts: as per requirements. 7. Gasket: liquid polyurethane foam continuous type suitable for indoor and outdoor applications.

We offer Control desks are used in various process industries to operate and control electrical and electronic control systems. types we manufacture 3 types are control desks are manufactured as per need and application. slanted top construction height 900mmm slanted top + high back pc monitor + push button construction control desks are manufactured from 1.5/2 mm crca sheet steel for type 1&2 and frame structure for type 3. 1. A) main body: main body is made of 1.5 / 2 mm crca sheet. Color: siemens gary ral7032 powder coated ( type 1 &2) b) m-13 structure frame: welded with 3d corner pieces. Color: satin black (type 3) 2. Plinth: 75/100/200 mm color: satin black (if required or wall mounting bracket) 3. Doors: 1.5mm 0r 2mm as needed. Color: siemens gary ral7032 powder coated 4. Mounting plate: 2 or 3 mm thick, color: orange powder coated or zinc plated or hot dip galvanized 5. Locks: four point lock with handle & key or cam lock 6. Cutouts: as per requirements. 7. Gasket: liquid polyurethane foam continuous type suitable for indoor and outdoor applications.

We are offering power control center(pcc).Types Power Control Center is normally Single Front with rear access for termination. However Single Front with Closed back, Double Front are manufactured as per requirements. Construction Manshu offers Modular Panels for Power Control Centre. The modular design has, Frame, Base, Doors, Cover, etc. and all are removable, changeable. 1. Main Body is made from M6h Structure frame: Color: Satin black 2. Base: 75 mm ISMC Color: Satin black 3. Doors: 1.5mm. Color: Siemens Grey RAL7032 Powder Coated 4. Mounting Plate: 1.5/2 mm thick, Color: Orange Powder Coated 5. Locks: Cam lock 6. Gasket: Liquid polyurethane foam continuous type suitable for indoor and outdoor applications 7. Indication & Meters: As per requirements. 8. Switchgear: All available makes are used in Panels. 9. Busbars: Aluminum or Copper Rigid or flexible busbars are used. Frame Frame is made of M6h design multi fold construction. This offers very high strength which is required for heavy components like Air Circuit Breaker, Copper Busbars etc. Also, this takes care during short circuit condition against various mechanical distortion forces. Base Base is made of 75mm ISMC channel. Modularity This is the main feature of Manshus panel. All vertical and horizontal frame members have Punching at 25mm pitch. This gives large flexibility during design, manufacturing and eases modification at site if required. Advantages Panel is very flexible. Expansion is very easy on both sides of Panel and can be expanded at Rear & Top in our factory as well at site. Enclosure Sizes Width of each section is from 300 to 1200mm, Height 2000 or 2300 mm + Base and depth is from 600 to 1600mm. Ingress Protection IP 32 and IP 42 are most suitable for good ventilation, however, IP 54 is also offered. Designing Manshus design centre works on every part of entire panel including Busbar design Fabrication design, CNC cad-cam design in-house for every order. Testing Facility All facilities are available In-house. Type Tests Panels are tested at CPRI and ERDA for 65kA for 1 sec, 50kA for 1 sec, IP 55, IP 56 IP 67. Largest Size Panel Executed 1. Incomer 6300A, 85kA for 1 sec. Length 10450mm. Tinned Copper Busbar. 2. Incomer 5000A, 65kA for 1 sec. Length 23000mm. Double Aluminum Busbar. 3. Incomer 4000A, 65kA for 1 sec. Length 18000mm. Maximum Size of Panel We can manufacture any length of panel. However in our factory we can assemble 45000mm panel for testing.

Types Power Distribution Board has following main types. 1. Compartmentalized design for ACB, MCCB and SDF feeders. 2. Non-Compartmentalized design for MCCB, MCB feeders. 3. Single front with rear access 4. Single front without rear access 5. Double front with both access Construction Manshu offers Modular Panels for Motor Control Centre. The modular design has, Frame, Base, Doors, Cover, etc. and all are removable, changeable. 1. Main Body is made from M6h Structure frame: Color: Satin black 2. Plinth: 75 mm ISMC Color: Satin black 3. Doors: 1.5mm. Color: Siemens Grey RAL7032 Powder Coated 4. Mounting Plate: 1.5/2 mm thick, Color: Orange Powder Coated 5. Locks: Cam lock 6. Gasket: Liquid polyurethane foam continuous type suitable for indoor and outdoor applications 7. Indication & Meters: As per requirements. 8. Switchgear: All available makes are used in Panels. 9. Busbars: Aluminum or Copper Rigid or flexible busbars are used. Frame Frame is made of M6h design multi fold construction. This offers very high strength which is required for heavy components like Air Circuit Breaker, Copper Busbars, etc. Also, this takes care during short circuit condition for various mechanical distortion forces. Base Base is made of 75mm ISMC channel. Modularity is the basic feature of Manshus panel. All vertical and horizontal frame members have Punching at 25mm pitch. This gives large flexibility during design, manufacturing and eases modification at site if required. Advantages Panel is very flexible. Expansion is very easy on both sides of Panel and can be expanded at Rear & Top in our factory as well at site. Enclosure Sizes Width of each section is from 300 to 1200mm, Height 2000 or 2300 mm + Base and depth is from 600 to 1600mm. Ingress Protection IP 32 and IP 42 are most suitable for good ventilation however IP 54 is also offered. Designing Manshus design centre works on every part of entire panel including Busbar design Fabrication design, CNC cad-cam design in-house for every order. Testing Facility All facilities are available In-house. Type Tests Panels are tested at CPRI and ERDA for 65kA for 1 sec, 50kA for 1 sec, IP 55, IP 56 IP 67. Largest Size Panel Executed 1. Incomer 2000A ACB, 65kA, Power Feeders 35Numbers. Length = 10000mm. 2. Incomer 800A 3P MCCB 50kA, Power Feeders 32 Numbers. Length = 6000mm. Maximum Size of Panel We can manufacture any length of panel. However in our factory we can assemble 45000mm panel for testing. Maximum Quantity of Panel PDBs are small panels. We can manufacture more quantity without any problem.

Types Feeder Pillar has following main types. 1. Feeders with protections 2. Feeders with protections and time dependence switching Construction Manshu offers welded construction for Feeder Pillar. 1. Main Body is made from 2mm Coated CRCA sheet Color: Siemens Grey or as required. 2. Plinth: as per site condition. ISMC or L angle. Color: Satin black 3. Doors: 1.5/2 mm. Color: Siemens Grey RAL7032 Powder Coated 4. Mounting Plate: 1.5/2 mm thick, Color: Orange Powder Coated 5. Locks: Four Point lock with handle & key or cam lock 6. Gasket: Liquid polyurethane foam continuous type suitable for indoor and outdoor applications 7. Indication & Meters: As per requirements. 8. Switchgear: All available makes are used in Panels 9. Busbars: Aluminum or Copper Rigid or flexible busbars are used. Advantages Sheet used is specially selected for outdoor application. Powder used is also selected to withstand UV rays. This gives long life. Gasket is specialty of Manshu with life span much higher than Neoprene Gasket. Enclosure Sizes This depends on number of feeders and application. Ingress Protection IP 54/55 is also offered (remove) as standard, however, IP 56 can also be offered. Designing Manshus design centre works on every part of entire panel including Busbar design Fabrication design, CNC cad-cam design in-house for every order. Testing Facility Manshu has All facilities for testing of panels. Type Tests Panel are tested ERDA IP 56 Largest Size Panel Executed 1. Incomer 200A 3P MCCB 35kA, Sockets 08 Numbers. Length = 1200mm 2. Incomer 400A 3P MCCB 35kA, Power Feeders 5 Numbers. Length = 2100mm

Types Motor Control Center are of three types. 1 Single front with rear access. 2 Single Front without Rear access. 3. Double front with both access. MCC is also designed as Compartmentalized or Non- Compartmentalized stayle. Construction Manshu offers Modular Panels for Motor Control Centre. The modular design has, Frame, Base, Doors, Cover, etc. and all are removable, changeable. 1. Main Body is made from M6h Structure frame: Color: Satin black 2. Base: 75mm Color: Satin black 3. Doors: 1.5mm. Color: Siemens Gary RAL7032 Powder Coated 4. Mounting Plate: 2mm thick, Color: Orange Powder Coated 5. Locks: Four Point lock with handle & key or cam lock 6. Gasket: Liquid polyurethane foam continuous type suitable for indoor and outdoor applications 7. Indication & Meters: As per requirements. 8. Switchgear: All available makes are used in Panels 9. Busbars: Aluminum or Copper Rigid or flexible busbars are used. Frame is made of M6h design multi fold construction. This offers very high strength which is required for heavy components like Air Circuit Breaker, Copper Busbars etc. Also, this takes care during short circuit condition against various mechanical distortion forces. Base Base is made of 75mm ISMC channel. Modularity is the main feature of Manshus panel. All vertical and horizontal frame members have Punching at 25mm pitch. This gives large flexibility during design, manufacturing and eases modification at site if required. Advantages Panel is very flexible. Expansion is very easy on both sides of Panel and can be expanded at Rear & Top in our factory as well at site. Enclosure Sizes Width of each section is from 300 to 1200mm, Height 2000 or 2300 mm + Base and depth is from 450 to 1600mm. Ingress Protection IP 32 and IP 42 are most suitable for good ventilation, however, IP 54 is also offered. Designing Manshus design centre works on every part of entire panel including Busbar design Fabrication design, CNC cad-cam design in-house for every order. Testing Facility All facilities are available In-house. Type Tests Panels are tested at CPRI and ERDA for 65kA for 1 sec, 50kA for 1 sec, IP 55, IP 56, IP 67. Largest Size Panel Executed 1. Incomer 2500A ACB, 50kA for 1 sec. Length 12000mm. 85 feeders. Double front. 2. Incomer 1600A ACB, 50kA for 1 sec. Length 8000mm. Single Front rear maintenance. 3. Incomer 400A MCCB , 35kA for 1 sec. Length 5000mm. Single Front Dead Back. Maximum Size of Panel We can manufacture any length of panel. However in our factory we can assemble 45000mm panel for testing.