We have in store for our clients, a wide range of Green Flux Powder that is used in aluminum melting for covering, protecting & cleaning the molten metal. These fluxes should be used in 0.5 - 1 % of metal charge for crucible furnaces and 125 - 150 grams per sq. ft. for reverberatory furnaces. It is used for recovering Aluminum from the hot dross without melting again, which saves the cost of remelting. This flux and red hot dross are added alternately in sandwich fashion in the perforated vessel or bogie. The dross is stirred continuously every 15 minutes till no more metal falls through holes of vessel. The application rate of this flux is 5-10 %. Packing: 50 packets of 1 kg. Packed in 50 kgs. Double Polylined Hessian sacks, which is solid enough to withstand shakes and jolts of transportation.

More About Information of Green Cover Flux SP-V : It is used for recovering Aluminum from the hot dross without melting again, which saves the cost of remelting. This flux and red hot dross are added alternately in sandwitch fashion in the perforated vessel. The dross is stirred continuously every 15 minutes till no more metal falls through holes of vessel. The application rate of this flux is 5-10 %.

We are providing to our client DAFEX-21 (SP Ladle Covering Compound). These items are offering on market leading prices

More About

DAFEX – II  a silica based insulating compound, acidic in nature, is specially formulated for use as a Tundish insulating cover in conventional casting .
DAFEX – II an extremely efficient insulatior, medium exothermic which covers the entire metal surface in the Tundish. It prevents heat losses in the metal and reduces skulling near nozzles and ladle . Immediately after the addition it spreads on the metal surface and dry throughout the pour.

• Ladle dumps out clean metal with no metal adhering to the refractory lining.It is specially recommended for supersilica boards.
• There is no need to superheat metal prior to handling thus extending furnace and ladle refractory life while contributing to overall operating efficiency and improved metallurgical properties.
• Recommended use of this compound is 2 – 2.5 kgs, per ton of molten metal or 15 kgs epr meter square, depending on the size of ingots.

We have in store for our clients, a wide range of Green Flux Powder that is used in aluminum melting for covering, protecting & cleaning the molten metal. These fluxes should be used in 0.5 - 1 % of metal charge for crucible furnaces and 125 - 150 grams per sq. ft. for reverberatory furnaces. It is used for recovering Aluminum from the hot dross without melting again, which saves the cost of remelting. This flux and red hot dross are added alternately in sandwich fashion in the perforated vessel or bogie. The dross is stirred continuously every 15 minutes till no more metal falls through holes of vessel. The application rate of this flux is 5-10 %. Packing: 50 packets of 1 kg. Packed in 50 kgs. Double Polylined Hessian sacks, which is solid enough to withstand shakes and jolts of transportation.

More About Information of Green Cover Flux SP-V : It is used for recovering Aluminum from the hot dross without melting again, which saves the cost of remelting. This flux and red hot dross are added alternately in sandwitch fashion in the perforated vessel. The dross is stirred continuously every 15 minutes till no more metal falls through holes of vessel. The application rate of this flux is 5-10 %.

We are providing to our client DAFEX-21 (SP Ladle Covering Compound). These items are offering on market leading prices

More About

DAFEX – II  a silica based insulating compound, acidic in nature, is specially formulated for use as a Tundish insulating cover in conventional casting .
DAFEX – II an extremely efficient insulatior, medium exothermic which covers the entire metal surface in the Tundish. It prevents heat losses in the metal and reduces skulling near nozzles and ladle . Immediately after the addition it spreads on the metal surface and dry throughout the pour.

• Ladle dumps out clean metal with no metal adhering to the refractory lining.It is specially recommended for supersilica boards.
• There is no need to superheat metal prior to handling thus extending furnace and ladle refractory life while contributing to overall operating efficiency and improved metallurgical properties.
• Recommended use of this compound is 2 – 2.5 kgs, per ton of molten metal or 15 kgs epr meter square, depending on the size of ingots.