Our Products
Stainless Steel Sheet
1 Products availablePipe Tees
1 Products availableIron & Metal Alloys
1 Products availableSteel Rods
1 Products availableSteel Pipes
1 Products availableFlanges
1 Products available317 Stainless Steel Pipe
1 Products availableOur offered Product range includes Rockstar 500 Plates, Rockstar 400 Plates, Abrex 400 Plates, Abrex 500 Plates and Mild Steel Chequered Plates.
Rockstar 500 is a wear resistant quenched and tempered steel plate having an excellent combination of hardness, formability and weldability to meet fabrication requirements.
Product Application
Rockstar 500 is used for application where the components are subjected to wear. It is a popular abrasion-resistant product for mining and other highly abrasive industrial applications.
Dimensions
Thickness | Width |
---|---|
6 – 50 mm | Up to 3500mm;higher width can be provided on a case to case basis |
Delivery Condition | Quenched/Quenched and tempered. The plates are delivered with sheared or thermally cut edges. Untrimmed edges can also be delivered after agreement. Plates can be delivered in Shot blasted and primer coated surface condition. |
Chemical Composition (Ladle Analysis)
Plate Thickness mm |
C Max % |
Mn Max % |
P Max % |
S Max % |
Si Max % |
Cr Max % |
Ni Max % |
Mo Max % |
B Max % |
CE Max |
PCM Max |
---|---|---|---|---|---|---|---|---|---|---|---|
6.0 – 20.0 | 0.60 | 0.41 | |||||||||
21.0 – 40.0 | 0.30 | 1.60 | 0.025 | 0.010 | 0.70 | 1.50 | 1.50 | 0.70 | 0.0040 | 0.65 | 0.43 |
41.0 – 50.0 | 0.74 | 0.48 |
Rockstar_500 Data Sheet
Rockstar 400 is a wear resistant quenched and tempered steel plate grade having an excellent combination of hardness, formability, weldability and toughness to meet requirement. It has designed with relatively low carbon equivalent for better weldability.
Product Application
Rockstar 400 is a cost effective abrasion resistant material used for fabrication of crushers, liners for truck beds, buckets, hoppers, chutes, excavators, and conveyor throughs, conrete mixer drums, trash truck bottoms, bucket lips, street sweepers and dump trailers and many more.
Dimensions
Thickness | Width |
---|---|
6 – 75 mm | Up to 3500mm;higher width can be provided on a case to case basis, depending on thickness |
Delivery Condition | Quenched/Quenched and tempered. The plates are delivered with sheared or thermally cut edges. Untrimmed edges can also be delivered after agreement. Plates can be delivered in Shot blasted and primer coated surface condition. |
Chemical Composition (Ladle Analysis)
Plate Thickness mm |
C Max % |
Mn Max % |
P Max % |
S Max % |
Si Max % |
Cr Max % |
Ni Max % |
Mo Max % |
B Max % |
CE Max |
PCM Max |
---|---|---|---|---|---|---|---|---|---|---|---|
6.0 – 20.0 | 0.16 | 1.6 | 0.025 | 0.010 | 0.70 | 0.50 | 0.25 | 0.25 | 0.0040 | 0.45 | 0.28 |
21.0 – 32.0 | 0.18 | 1.60 | 0.025 | 0.010 | 0.70 | 1.00 | 0.25 | 0.25 | 0.0040 | 0.48 | 0.29 |
32.1 – 50.0 | 0.22 | 1.60 | 0.025 | 0.010 | 0.70 | 1.40 | 0.50 | 0.60 | 0.0040 | 0.57 | 0.33 |
50.1 – 75.0 | 0.22 | 1.60 | 0.025 | 0.010 | 0.70 | 1.40 | 0.50 | 0.60 | 0.0040 | 0.65 | 0.40 |
Rockstar_400 Data Sheet
We are involved in offering durable Abrex 400 Plates at the most competitive prices. We are the noted Abrex 400 Plate Supplier. These plates are manufactured using quality materials at vendor’s end. In addition, our procuring agents and quality auditors stringently check each and every product against varied quality parameters. The company is located in Mumbai (India) and caters to the diverse requirements of the buyers. We ensure on time distribution of wholesale as well as retail consignments owing to an extensive vendor, distributor and logistic facility base. We are capable of undertaking bulk as well as urgent orders of the clients.
Specification By Type And Designation
Type | Designation | Plate Thickness t (mm) | Brineel Hardness (HBW)*1 | Charpy Impact Test (L Direction)*2 | ||
Aiming | Range | Test Temperature (oC) | Absorbed Energy (J) | |||
Standard Type | ABREX 400 | 6 (4.0) ~100 | 400 | 360~440 | -- | -- |
Extra Tough Type | ABREX 400LT | 6 (4.0) ~ 60 | 400 | 360~440 | -40 | >27 |
.
Type | Designation | Thickness (mm) |
Chemical Composition*1 (%) |
|||||||||||
C | SI | Mn | P | S | Ni | Cr | Mo | B | PCM (t:thickness)*2 | |||||
T<25 | T<50 | t>50 | ||||||||||||
Standard Type | ABREX 400 | ~100 | <0.21 | <0.70 | <2.00 | <0.025 | <0.010 | <1.00 | <1.20 | <0.060 | <0.005 | <0.30 | <0.35 | <0.35 |
Extra Tough Type | ABREX 400LT | ~60 | <0.21 | <1.20 | <2.00 | <0.020 | <0.010 | <1.00 | <1.20 | <0.60 | <0.005 | <0.30 | <0.35 | <0.35 |
Typical Properties And Characteristics
Type | Designation | Thickness | Chemical Composition |
Brinell Hardness (HBW) |
Mechanical Properties (Reference Values) | |||||||
Tensile Tests | Bending Tests*2 | Charpy Impact Test | ||||||||||
PCM (%) | Ceq*1 (%) | Yield Strength (N/mm2) | Tensile Strength (N/mm2) |
Bend Radius (t :thickness) (t: espesor) |
Angle | Result | Temperature (oC) | Absorbed Energy (J) | ||||
Standard Type | ABREX 400 | 25 | 0.27 | 0.49 | 407, 405, 406 | 1025 | 1259 | 3t | 180o | No Cracking | 0 | 38 |
Extra Tough Type | ABREX 400LT | 60 | 0.30 | 0.60 | 390, 393, 393 | 1162 | 1207 | 3t | 180o | No Cracking | -40 | 63 |
Test Condition | JIS Z2243 Surface | JIS No. 5 or No. 4 T-Direction | JIS No.1 T-Direction | 2mm V Notch, L-Direction | ||||||||
Abrex Data Sheet
We are the trusted Abrex 500 Plate Suppliers in India. Our Abrex 500 Plates are appreciated for their high strength, durability, excellent finish, and various other attributes. Positioned with leading names, we are an emerging name operating from Mumbai (India). We source our product only from the reliable manufacturers or vendors after checking against varied quality parameters. Be it seasonal supply, wholesale supply or quick delivery, we are capable of entertaining all your requirements as we have state-of-the-art storage space to keep the stacks of the products in an organized manner. We are capable of entertaining bulk as well as urgent orders and offer our products at reasonable prices.
Specification By Type And Designation
Type | Designation | Plate Thickness t (mm) | Brineel Hardness (HBW)*1 | Charpy Impact Test (L Direction)*2 | ||
Aiming | Range | Test Temperature (oC) | Absorbed Energy (J) | |||
Standard Type | ABREX 450 | 6 (4.0) ~100 | 450 | 410~490 | -- | -- |
ABREX 500 | 6 (4.5) ~100 | 500 | 450~550 | -- | -- | |
ABREX 600 | 8~25 | 600 | 550~650 | -- | ||
Extra Tough Type | ABREX 450LT | 6 (4.0) ~ 60 | 450 | 410~490 | -40 | >27 |
ABREX 500LT | 6 (4.5) ~ 80 | 500 | 450~550 | -40 | >21 |
.
Type | Designation | Thickness (mm) | Chemical Composition*1 (%) | |||||||||||
C | SI | Mn | P | S | Ni | Cr | Mo | B | PCM (t:thickness)*2 | |||||
T<25 | T<50 | t>50 | ||||||||||||
Standard Type | ABREX 450 | ~50 | <0.23 | <0.70 | <2.00 | <0.025 | <0.010 | <1.00 | <1.20 | <0.60 | <0.005 | <0.36 | <0.36 | - |
>50 | <1.20 | <1.50 | - | - | <0.40 | |||||||||
ABREX 500 | ~50 | <0.35 | <0.70 | <2.00 | <0.015 | <0.010 | <1.00 | <1.20 | <0.60 | <0.005 | <0.42 | <0.42 | - | |
>50 | <1.20 | <1.50 | - | - | <0.45 | |||||||||
ABREX 600 | ~25 | <0.45 | <0.70 | <2.00 | <0.015 | <0.010 | <1.00 | <1.20 | <0.060 | <0.005 | <0.54 | - | - | |
Extra Tough Type | ABREX 450LT | ~25 | <0.28 | <1.20 | <2.00 | <0.020 | <0.010 | <1.00 | <1.20 | <0.60 | <0.005 | <0.36 | - | - |
>25 | <1.50 | <0.40 | <0.40 | |||||||||||
ABREX 500LT | ~25 | <0.35 | <1.20 | <2.00 | <0.015 | <0.010 | <1.00 | <1.20 | <0.60 | <0.005 | <0.42 | - | - | |
>25 | <1.50 | <0.45 | <0.45 |
Typical Properties And Characteristics
Type | Designation | Thickness | Chemical Composition | Brinell Hardness | Mechanical Properties (Reference Values) | |||||||
Tensile Tests | Bending Tests*2 | Charpy Impact Test | ||||||||||
PCM (%) | Ceq*1 (%) | Yield Strength (N/mm2) | Tensile Strength (N/mm2) | Bend Radius (t :thickness) (t: espesor) | Angle | Result | Temperature (oC) | Absorbed Energy (J) | ||||
Standard Type | ABREX 450 | 25 | 0.31 | 0.50 | 458, 453, 459 | 1192 | 1469 | 3t | 180o | No Cracking | 0 | 57 |
ABREX 500 | 25 | 0.36 | 0.54 | 513, 509, 520 | 1373 | 1552 | 3t | 180o | No Cracking | 0 | 43 | |
ABREX 600 | 25 | 0.50 | 0.70 | 611, 606, 601 | - | - | - | - | - | 0 | 18 | |
Extra Tough Type | ABREX 450LT | 25 | 0.31 | 0.50 | 469, 469, 469 | 1089 | 1465 | 3t | 180o | No Cracking | -40 | 63 |
ABREX 500LT | 25 | 0.37 | 0.53 | 507, 510, 507 | 1198 | 1680 | 3t | 180o | No Cracking | -40 | 38 | |
Test Condition | JIS Z2243 Surface | JIS No. 5 or No. 4 T-Direction | JIS No.1 T-Direction | 2mm V Notch, L-Direction | ||||||||
Abrex Data Sheet