Manhar Metal Supply Corporation

Bhuleshwar, Mumbai, Maharashtra

Tantalum (Ta) is a dark blue-gray metal that is very heavy, ductile and hard and has high corrosion resistance. Tantalum is especially resistant to chemicals at temperatures below 150 C and can only be dissolved with hydrofluouric acid. It has the fourth highest melting point of all metals and is able to form extremely thin and protective oxide layers for high-quality capacitors, making it an excellent material for tubes.

We Manhar Metal offers Beryllium Copper Flat Bar.

Beryllium Copper C17200 / Beryllium Copper Alloy 25

European Standards:CuBe2, DIN 2.1247, CW101C to EN BeCu

Typical Physical Properties:

Density (g/cm3): 8.36

Density before age hardening (g/cm3): 8.25

Elastic Modulus (kg/mm2 (103)): 13.40

Thermal Expansion Coefficient (20 C to 200 C m/m/C): 17 x 10-6

Thermal Conductivity (cal/(cm-s-C)): 0.25

Melting Range (C): 870-980

Physical property:

1.High strength2.High hardness3.High elasticity4.Superior fatigue resistance5.Superior abrasion resistance

6.Superior mouldability and isotropy

Tantalum-10% Tungsten and Tantalum-2.5% tungsten have ahigherstrength at elevated temperatures, and better corrosion resistance than pure tantalum.

Standard:ASTM B365

Grade:RO5200, RO5400, RO5252 (Ta-2.5W), RO5255 (Ta-10W)

Specifications: 0.25 100mmExecutive Standard: ASTM B365-98Ingredients Description:

High purity tungsten rods can be used as heat conductor, additive, crankshaft and cylinder barrel ofautomobile, parts of heat-resistant steel and electrode. High purity tungsten rods are mainly used in guns, rockets, satellites, airplanes and ships.

The purity (99.999%) tungsten bars are mainly used as materials for high standard bearing steels, automobiles, high-speed railways, high precision equipment, and high-tech weapons. The purity (99.99%) tungsten bars are mainly used in alloy tool steel, high quality clean steel, and high performance special steel, etc. The purity 99.95% tungsten products are mainly used to cast raw materials for ingredients and forging special steel and drawn steel wires.

Molybdenum bar is used as vacuum material, cathode for emitting tube, high temperatureelectrodes etc.Molybdenum rods/bars/pole is a material with silver gray or gray metallic luster. They are used for producing molybdenum line-cutting, filament, coil wire, lead wire support, electron vacuum components and grid, etc.

Application:
Molybdenum bar is mainly used in drawing thin molybdenum wire, molybdenum electrode and steel-making additives. Meanwhile, molybdenum bar is also widely used in the furnace industry for radiation screens, elements, and sintering trays

We are committed to offer a wide assortment of Nickel Alloys Rods, Bars, Wires to our valuable customers. Our products are available in various specifications, sizes, shapes and dimensions as per the working demand of the customer. These products are highly appreciated amongst our clients for their high mechanical strength and longer service life.

Specifications :-
Grades :Nickel 200 (UNS No.2200), Nickel 201 (UNS No.2201), Nickel 205 (UNS N0.2205)

Form :Square , Round , Hex , Flat, Wire In Black & Bright Finish

Range :3.17 mm to 350 mm dia

We offerNickel Round Baras per the following specifications.
Standard: ASTM / ASME SB 160

The salient features are as follows :

Market leading prices
High quality
Customization available

160" Dia. to under 4-1/2" Dia. x RL [Up to 17-3/4"][Bar can be Saw Cut to any Custom size.] [By ASTM definition, Bar has a cross-sectional area less than 16 in2. Larger sizes, however, are often also referred to as Bar.]

1/4" Square to 1" Square x RL [Up to 14'] Bar can be Saw Cut to any Custom size. [By ASTM definition, Bar has a cross-sectional area less than 16 in2. Larger sizes, however, are often also referred to as Bar.]

6-32 through 1-8 x 10' to 12' RL
[Other sizes available on request.]

High purity tungsten rods can be used as heat conductor, additive, crankshaft and cylinder barrel ofautomobile, parts of heat-resistant steel and electrode. High purity tungsten rods are mainly used in guns, rockets, satellites, airplanes and ships.
The purity (99.999%) tungsten bars are mainly used as materials for high standard bearing steels, automobiles, high-speed railways, high precision equipment, and high-tech weapons. The purity (99.99%) tungsten bars are mainly used in alloy tool steel, high quality clean steel, and high performance special steel, etc. The purity 99.95% tungsten products are mainly used to cast raw materials for ingredients and forging special steel and drawn steel wires.

Molybdenum bar is used as vacuum material, cathode for emitting tube, high temperature electrodes etc.Molybdenum rods/bars/pole is a material with silver gray or gray metallic luster. They are used for producing molybdenum line-cutting, filament, coil wire, lead wire support, electron vacuum components and grid, etc.
Application:
Molybdenum bar is mainly used in drawing thin molybdenum wire, molybdenum electrode and steel-making additives. Meanwhile, molybdenum bar is also widely used in the furnace industry for radiation screens, elements, and sintering trays

We are committed to offer a wide assortment of Nickel Alloys Rods, Bars, Wires to our valuable customers. Our products are available in various specifications, sizes, shapes and dimensions as per the working demand of the customer. These products are highly appreciated amongst our clients for their high mechanical strength and longer service life.

Specifications :-
Grades :Nickel 200 (UNS No.2200), Nickel 201 (UNS No.2201), Nickel 205 (UNS N0.2205)

Form :Square , Round , Hex , Flat, Wire In Black & Bright Finish

Range :3.17 mm to 350 mm dia

We offerNickel Round Baras per the following specifications.
Standard: ASTM / ASME SB 160

The salient features are as follows :

Market leading prices
High quality
Customization available

We have immense pleasure in introducing ourselves to your organization as one of the leading and largest stockist and dealers of stainless steel, aluminium, bronze, copper, brass, lead, tin, zinc, antimony, mid steel, carbon steel, tools and alloy steel, metal powder etc. In all shapes and sizes.