Pressing & Binding Machines #5335703

NB brand calendar rimming machine is most useful and suitable machine for every kind of calendar manufactures. Can fix calendar rim in double fold easily. Various types of calendar rimms attached with plastic tags or without tags are readily available in the market. These rimms have a 45 degree bend lengthwise of the rim. One leg is small while the other leg is almost double. The printed calendar papers are inserted manually in the prefolded rim which has already been placed in the machine as shown in the figure. Then with the handle of the machine, it is rotated about 180 degree. This is called first stroke with this stroke, the calendar papers are held firmly by the rim because when we make the first stroke the smaller leg gets pressed & the longer leg gets a new bend & at the same time gets flattened. Then again we make another stroke only for more pressing the already pressed rims to make it a rigid one. At the time of first stroke a thread loop can be placed along with the papers for hanging the calendar on the wall. The purpose of the calendar rimming machine is to make a bend of 45 degree on the rim (IF it in not present already) Press the 45 degree smaller leg & at the same time make a fold in the longer leg of the rim from center & press it to overlap the previous fold. Then again pressing with second stroke.

- Versatile machine that traces from a single 'master' an identical reproduction on various sizes on all types of material, giving a truly professional result - Multiple Engraving Possibilities: Sign Plates, Badges, Tags, Personal Effects, Identifications, Designations, Illustrations, Markings, Numbering, Trade Marking Symbols, Displays, Safety Warnings, and limitless other applications- Engraving is obtained by copying from a template or model. The template could be letters, numerals, etc. or any particular design.- Pantograph is provided with a variable ratio adjustment. Scales are provided on the pantograph for adjusting the desired ratio, which will always be reduction from the template or character- A Self Centering Work Holding Vice is provided with arrangements for lateral and cross movement- Copy holding slides are positioned on the tracer plate by a simple clamping device. This arrangement allows one or more composed texts to be positioned as desired. Graduated scales ensure parallelism between copy holding slides and work holding vice.- The cutter spindle runs in precision bearings at a speed of rotation designed for engraving a wide variety of materials. A regulating device automatically ensures constant depth of engraving on a flat or slightly uneven surface- Area covered by the pantograph can usually be increased by the movements of the vice as also sliding the pantograph carrier along its slideway, or alternatively by moving the copy holding slide or the component being engraved. Extra large areas can be engraved on the SG-2 machine as this machines ahs a Lift-off type pantograph which can be positioned as desired.- There are three types of Cutting tools / cutters:1. High Speed Steel Cutters for engraving on perspex, acrylic, plastic, brass, anodized aluminum, hardwood, etc.2.Tungsten Carbide Cutters for engraving on abrasive plastic material, bakelite, hylam, formica, etc.3. Diamond Cutters for use of scratch marking on metals like Silver, Gold, Platinum or on glass, etc.Profiles of the cutters determine the form of the groove which is engraved and can be suitably ground on a cutter grinder- Model: SG-1 is a portable, affordable, bench machine, ideally suited for a variety of engraving jobs- Model: SG-2 is a multiple application engraving machine for precision bench work as well as extra large panels. It incorporates a special Lift-off type pantograph for engraving jobs not generally possible in other conventional machines. Adapted for electronic mimic panels, numbering parts, marking tools, gauges, fixtures, cutting stencils, special profiles, etc.

These Three Dimensional Pedestal Type Pantograph Milling Engraving Machines are hand operated and have very wide applications, The main spindle is fitted on high precision bearings and has 8 speeds ranging from 1100 to 12000 rpm. This wide range of speeds make it possible to use the correct speeds for different types of material, The cutter spring goes up automatically by spring pressure after engraving each character, thus preventing spoiling of the job. It is also free of vibration even at maximum speed, thus ensuring a clean and excellent surface finish of the job.