Maneklal and Sons (Exports)

Nariman Point, Mumbai, Maharashtra

- Suitable for straightening and cutting of electric welding rods, cloth hanger wire, electrical parts, etc.- Any length of wire can be cut without automatic attachment- Straightening function performed by five straightening blocks which are adjustable- Automatic cutting gauge for required length can be provided

Size of Trolley: 7' x 3' (Standard) Maximum Capacity to cut marble granite size: 8' x 4'Rail: 15' Long, 2 numbers (one 'V' type and one 'Square' Type) Minimum Water, Requirement: 15 Liters per Minute, Spindle Vertical Movement: 540 mm, Spindle Horizontal Movement: 500 mm Spindle Angular Adjustment from vertical: 45o on either side, Cutter Speed: 2800 rpm (Depends on the disc diameter and material to be sawed. It is recommended that you give us that information at the time of placing order), Motor: 7.5 HP or 10 HP.

- Machine suitable for Paper, Board, Veneers, Plastic & Metal Foils- Programme: The machine can store 99 programmes and the capacity of one programme is 99 cuts. Accuracy of the programme is 0.01 mm or 0.001 inch. Conversion in inch and mm fractions is also possible- Mode: Single Cut & Multi Cut- Back Gauge Accuracy Control through Ground Guide System- Air cushion table for easy movement of heavy stock- Infrared photo cell safety device- Adjustable variable clamping pressure: 300 to 4500 kg- Hydraulic Power Pack unit with double pressure cylinder- Precision cutting- Lighting on cutting edge- Knife easily changeable & adjustable by single operator- Extended side tables for stocking- Drive Gears in oil bath- Frame, Tables & Knife holder of graded cast iron

- The Machine Consists of two sets of 6 Rolls in 2 planes (5 Straightening Rolls plus one Pinch Roll).- The top rolls are idle and give the required bending moment for straightening the tubes and are adjustable vertically.- The bottom rolls are driven. The drive consists of motor coupled to a gear box.- Roll Material: HC HCr Hardened and Ground- Cutting Arrangement Pneumatic with PLC control- Machine made as per requirement for tubes of diameter up to 25 mm- Machine supplied with 1 set of rolls for any one size of tube. Additional rolls for other diameters of tubes available at extra cost- Decoiling speed can be supplied as per requirement- Drive: with 2 HP electric motor coupled to suitable Gear box- Control Panel supplied with the machine, suitable for complete operation of the decoiler and cutter.- Length to be cut is variable and can be programmed with PLC control.

Size of Trolley: 7' x 3' (Standard)Maximum Capacity to cut marble / granite size: 8' x 4'Rail: 15' Long, 2 numbers (one 'V' type and one 'Square' Type)Minimum Water Requirement: 15 Liters per MinuteSpindle Vertical Movement: 540 mmSpindle Horizontal Movement: 500 mmSpindle Angular Adjustment from vertical: 45^o on either sideCutter Speed: 2800 rpm (Depends on the disc diameter and material to be sawed. It is recommended that you give us that information at the time of placing order)Motor: 7.5 HP or 10 HP

For cutting both sides of the tube. Loading of the tubes manual. Ejection by stripper mechanism. Cutting done by pedal system. Supplied with 1 HP motor and suitable starter.

- Designed for clean, smooth and accurate cutting of mild steel and low alloy carbon steel- Best suited for straight line, bevel and circular cutting- Steering the machine manually over the work place assists in cutting awkward profiles- The machine makes flame cutting operation simple and economical- Machine is well-balanced and does not require counter balancing- The cutting speed can be set instantly and accurately by an indexed selector knob- The control switch is Forward / Off / Reverse type- All controls are conveniently located at the front, just underneath the handle, for easy and quick operation- The specially designed torch prevents back fire- Dynamically balanced armature, ultra smooth drive, standard aluminum rail, internal heat resistive lined body, fiber glass insulated circuit, etc. make these machines an exclusive choice for small workshops to shipbuilders- The machine can be supplied with 110V / 60Hz or 220V/50Hz supply- The machine can be supplied with either Injector Mix , NM or Victor torch system

Size of Trolley: 7' x 3' (Standard)Maximum Capacity to cut marble granite size: 8' x 4'Rail: 15' Long, 2 numbers (one 'V' type and one 'Square' Type)Minimum Water Requirement: 15 Liters per MinuteSpindle Vertical Movement: 540 mmSpindle Horizontal Movement: 500 mmSpindle Angular Adjustment from vertical: 45o on either sideCutter Speed: 2800 rpm (Depends on the disc diameter and material to be sawed. It is recommended that you give us that information at the time of placing order)Motor: 7.5 HP or 10 HP

Size of Trolley: 7' x 3' (Standard)Maximum Capacity to cut marble granite size: 8' x 4'Rail: 15' Long, 2 numbers (one 'V' type and one 'Square' Type)Minimum Water Requirement: 15 Liters per MinuteSpindle Vertical Movement: 540 mmSpindle Horizontal Movement: 500 mmSpindle Angular Adjustment from vertical: 45o on either sideCutter Speed: 2800 rpm (Depends on the disc diameter and material to be sawed. It is recommended that you give us that information at the time of placing order)Motor: 7.5 HP or 10 HP

These machines are primarily meant for cutting different shapes such as stars, hexagons, squares, rectangles, circles, triangles, etc. It can also cut straight lines and Bevels upto 45o. The motor driven Electro Magnetic Tracing Head on the carriage arm traces the profile on the template. This enables the torch to duplicate any intricate shape provided on the template of the machine. The machines are designed with Pantograph type arms providing a direct line guiding system- A simple and accurate magnetic tracing system helps in maintaining repeatability of the flame cut parts Precise Ball and Needle bearing design of hinges ensure free and frictionless tracing, enabling greater cutting accuracy, The speed of the machine can be varied with an indexed selector knob. The tracing head can be moved in Clockwise or Anticlockwise direction by a selector switch. Model Ostrich is a heavy duty, foundation mountable, cantilever type robust shape cutting machine suitable for a large number of duplication jobs, particularly for multiple shift type production applications

- Steel Fabricated Body- Inclined cutter axis for burr free cutting- Thrust bearing centre obtains circle without centre mark WPS Steel Cutters, Motor, Starter and V Belts. Optional Accessories: Spare set of Cutters, High-Speed Steel Cutters, Strip Cutting Gauge, Spare Thrust Bearing Centre

tandard Accessories:2 Nos. 2800 RPM, 18 HP, Single Phase Electric Motors1 PMDC Variable Speed Geared Motor, Output 110 RPM, 0.12 HP1 Variable Speed Controller For PMDC Geared Motor110 mm Diameter Universal Clamping Disc for maximum 6 mm chain width2 Dial Indicator3 Nos. 50mm diameter Magnifying Glass2 Vacuum attachments attached to the machine (Horizontal & Vertical separate)2 Machine Lamps5 Machine Belts1 No. 130XL Timing Belt1 Alley Key Spanner set (6 pieces)

Air Gun Set, Digital Centering System, Single Cylinder Clamping Plate, 5 nos. Steel Guide Stems, 2 nos. Cutting Tools (45o), Ball Head (cutting holder) of 0.236 6 mm, Tip Holder (14 to 25 mm), 6 nos. Stainless Steel Springs, 4 nos. Brass Bushes, Tilting and Lifting Mechanism for Cylinder Heads, 2 nos. Job Support Plate, Cutter Blade Removal Screw Driver, Allen Key Set, Spanner, 4 nos. Leveling BoltsWith VSC-6M: Air Gun Set, Digital Centering System, 10 nos. Steel Guide Stems, 2 nos. Cutting Tools (45o), 1 no. Cutting Tool (30o), 1 no. Chamfering Tool (45o), 1 no. Phasing Tools (90o), Ball Head (cutting holder) of 0.236 6 mm, Ball Head (cutting holder) of 0.375 9.5 mm, Tip Holder (14 to 25 mm), Tip Holder (24 to 40 mm), Tip Holder (40 to 60 mm), 6 nos. Stainless Steel Springs, 6 nos. Brass Bushes, Tilting and Lifting Mechanism for Cylinder Heads, 2 nos. Job Support Plate, Cutter Blade Removal Screw Driver, Allen Key Set, Spanner, 4 nos. Leveling Bolts.

- Lightweight, Portable yet Robust chain type Pipe Cutting Machines- Available in Hand Operated and Motorized versions- The machine can cut pipes of diameter 150 mm or more by quickly and easily changing the length of the chain- Cutting can be done in clockwise or anti-clockwise direction from both sides of the machines- The machine can cut pipes of thickness 5 to 50 mm by simply using the appropriate nozzle- The machine can cut bevels of upto 45o by selecting the required angle on the torch holder- The machine torch can be adjusted vertically and horizontally alongside the pipe surface by rack and pinion attachments- The machine can also be used to cut Stainless Steel and other Non-Ferrous pipes by using Plasma Cutting Torch (Torch holder to suit your Plasma Cutting Torch can be supplied as an optional attachment)- Remote Control Unit (1 set) supplied with the motorized version

- These machines are primarily meant for cutting different shapes such as stars, hexagons, squares, rectangles, circles, triangles, etc. It can also cut straight lines and Bevels upto 45^o.- The motor driven Electro Magnetic Tracing Head on the carriage arm traces the profile on the template. This enables the torch to duplicate any intricate shape provided on the template of the machine.- The machines are designed with Pantograph type arms providing a direct line guiding system- A simple and accurate magnetic tracing system helps in maintaining repeatability of the flame cut parts- Precise Ball and Needle bearing design of hinges ensure free and frictionless tracing, enabling greater cutting accuracy- The speed of the machine can be varied with an indexed selector knob. The tracing head can be moved in Clockwise or Anticlockwise direction by a selector switch.- Model Ostrich is a heavy duty, foundation mountable, cantilever type robust shape cutting machine suitable for a large number of duplication jobs, particularly for multiple shift type production applications- Model Mini-Ostrich is a light weight, portable yet robust shape cutting machine suitable for on field jobs as well as for factories