Other Products / Services

We are leaders in the market for providing best range of

Line Size DN 10 to DN 500
Pressure Up to DN80 – PN 40 From DN100 to DN200 – PN 16 From DN250 to DN500 – PN10
Accuracy ±1% of Actual Flow Rate between 100% to 10% of calibrated range
Media Temperature Hard Rubber (HR) -0-90 Deg C PTFE – 0 – 150 Deg C PFA: 0 to 200 Deg C
Ambient 0 to 50 Deg C
Pipe Material SS304 (nonmagnetic)
Liner Material Hard Rubber/PTEF/PFA
Coil Housing Material MS/CS PU Painted/SS304/SS316
Flanges Material MS/CS/SS316/SS304/SS316 L
Min Media conductivity 20 micro-Siemens per cm
Type of Transmitter SS1021
Shelf Life 5 Years
Local Display 2-line LCD Display For instantaneous Flow rate, Totalizer, Engg. units, Fault Message, etc
Output Pulsed DC output/4-20 mA (Optional)/Rs485 Communication (Optional)
GSM Facility Optionally Available
Flow Velocity 0.2m/s to 12m/s
Ingress Protection IP68 for Primary Flow Sensor, IP67 for flow Transmitter

Accuracy ±0.25% Of Full Scale
Brand Name manas microsystems
Mounting Wall/Panel
Max depth 185mm
Data logging Approx readings: 3000 for normal logging &Approx 5500 readings for extended logging
Power supply 85 to 265V AC, 50Hz, single phase
Pressure range 1 to 50 kg/cm2 (g) or Bar (g) max.-programmable
Flow type Compensated/Uncompensated programmable
Enclosure Al Diecast/ABS Plastic
Comm. Port RS485 std., RS232 (Optional)
Density Compensation Online monitoring and compensation of density
Dimensions WM Type 310 (L) x 160 (W) x 105 (D)
Dimension PM Type Bezel-144mm (H) x 72mm (W) cutout-138mm (H) x 68mm (W)

Manas Microsystems Draft Pressure
Application Liquid Pressure, Measuring Gas
Features Accuracy much better as compared to mechanical gauges, Temperature compensation for span & zero provided.
±50 mmwc to ±750 mmwc 4-20 mA propotional to calibration range
±2.5% F.S. 230Vac/110Vac, 50 Hz single phase
4-20mA in 600 Ohms max load Bezel- 144(H)×72(W) Cutout- 138(H)×68(W) Depth-135

Accuracy ±0.5 % +-(1mm/sec) of Actual Flow Rate between 100 % to 10 % of calibrated range
Line Size DN 10 to DN 350
Operating Temperature HR : 0 – 90 ºC / PTFE : 0 – 150 ºC / PFA : 0 – 200 ºC / Neoprene : 0 – 90 ºC
Brand manas microsystems
Liner Material HR, PTFE, PFA, Neoprene
Electrode MOC SS316, Hastalloy C, TAN, TI
Flange Standard ANSI / DIN / BS 10 E / BS 10 F / IS
Flange / Coil Housing MOC MS / CS / SS 316 / SS 304
Operating Pressure Up to DN 80 – PN 40, From DN 100 to DN 200 – PN 16, From DN 250 to DN 350 – PN 10
Transmitter Mounting Remote / Integral
Types of Transmitters SS1002
Display Type 16 characters x 2 rows LCD Display for instantaneous Flow rate, Totaliser, Engg. units
Velocity Range 2.5 m/s to 10 m/s
Communication RS 485(default) / RS 232(optional)

Accuracy ±2.5% Of Actual Reading
Brand Name manas microsystems
Size 1 inch to 8 inch
Mounting Wall/Panel
Max depth 185mm
Data logging Approx readings: 3000 for normal logging &Approx 5500 readings for extended logging
Power supply 85 to 265V AC, 50Hz, single phase
Pressure range 1 to 50 kg/cm2 (g) or Bar (g) max.-programmable
Flow type Compensated/Uncompensated programmable
Enclosure Al Diecast/ABS Plastic
Comm. Port RS485 std., RS232 (Optional)
Density Compensation Online monitoring and compensation of density
Dimensions WM Type 310 (L) x 160 (W) x 105 (D)
Dimension PM Type Bezel-144mm (H) x 72mm (W) cutout-138mm (H) x 68mm (W)

Tell Us What are you looking for? Will call you back

Charuhas B (Manas Microsystem Pvt LTD)
E. L. – 54, Electronic Zone M. I. D. C, Bhosari, Pune, Maharashtra - 411026, India
Share us via
Call 08068499991 Ext. 024
Found Something Wrong with this Listing? Report Here.

Manas Microsystem Pvt LTD Bhosari, Pune, Maharashtra