Manas Microsystesms Pvt. Ltd. Pune, Maharashtra

• Suitable For Saturated & Superheated Steam. • Three nos. of 4-20 ma dc i/p from DP / Flow transmitter, Pressure transmitter,   Temperature transmitter/RTD PT-100. • Universal power supply. • Isolated 4 – 20 mA output proportional to Flow rate. • Accuracy of ± 0.25 % of Full Scale • 4 digits LED display for flow rate & 6 digits for total flow are available. • Linear or Square Root operation. • Serial Interface with Computer through MODBUS RTU Protocol. • The unit has two alarms, configured on pressure input.

• Suitable For compressed gas & air • Linear or Square Root operation. • Accuracy of ± 0.25 % of Full Scale. • Three nos. of 4-20 ma dc i/p from DP / Flow transmitter, Pressure transmitter,   Temperature transmitter/RTD PT-100. • Universal power supply. • Isolated 4 – 20 mA output proportional to Flow rate. • 4 digit LED display for flow rate & 6 digit for total flow is available. • Serial Interface with Computer through MODBUS RTU Protocol. • Two numbers of alarms is available on instantaneous flow rate. • If Flow rate exceeds the set reference flow, the lower 4 digit Display for Flow rate   blinks.

• Suitable For boiler feed water with density compensation. • Online Computation For density Reducing Errors in Measurement Due To Pressure &   Temperature. • Isolated 4-20mA D.C. output proportional to Flow Rate. • Linear or Square Root operation. • Availability of panel & Wall mounting. • Serial Interface with Computer through MODBUS RTU Protocol. • Two alarm settings are available and single alarm output is available. • If Flow rate exceeds the set reference flow, the lower 4 digit Display for Flow rate   blinks.      

The SFMc-150 Compact steam flow meter system is engineered to suit your requirement. It has no moving parts and no wiring connections are required during installation. The mass flow rate of Saturated and Superheated steam is calculated by measuring the differential pressure across the orifice plate and instantaneous density. Online density compensation is possible because of the online pressure and temperature measurement. In conventional system of measurement, the differential pressure generated by orifice plate is measured by DP transmitter. The output of from DP transmitter after square rooting is accepted as proportional to flow rate. This assumption is true only when the density is constant.

We are dealing in btu meter, Based on calculations of thermal power & energy consumed through measurement of flow, temperature difference of inlet & outlet of the medium. 4-20 mA output proportional to power output 16x2 LCD, 9 digits for total energy & 5 digits for instantaneous power. The engineering unit can be selected as either KW & KWHr or BTUHr & BTU. Communication port RS 232485 is available with MODBUS RTU. Backup of totaliser on power failure in non volatile memory Logging history can be viewed on the screen Ingress Protection: IP65 Equivalent

The Digital draft gauge 4475-PX accepts the draft pressure input as the signal and displays it in terms of mmwc. It also delivers 4 -20 mA output proportional to the Draft. The Draft transmitter is a field mounting unit and is a two wire system delivering 4-20mA output proportional to Draft Input. The Transmitter can be mounted in the field thereby avoiding long lengths of impulse lines and also errors due to the lengths. Principal Features : • Digital Display (so No Confusion) • Much Better Accuracy compared to Mechanical Gauges. • Wide Range of Draft measurement possible. • Typically, ±50 mmwc to ± 750 mmwc. • Transmitter being Field Mounted, Errors due to Long Impulse lines are avoided.