Our Products
Calibrators And Monitoring Systems
2 Products availableLevel Controllers
2 Products availableLevel Transmitters
1 Products availableMagnetic Switch
1 Products availableBoilers
1 Products availableHigh Voltage Circuit Breaker
1 Products availableWe offer the best product range of Mobray Dual Control.
We are among the leading Manufacturers and Suppliers of Tube Type Liquid Level Controller. The Tube Type Liquid Level Controller is made from quality components, ensuring the delivery of excellent performance for years and years. The Tube Type Liquid Level Controller comes at market leading price. IntroductionMagnetic float and tube type, level switch in conjunction with control unit is an established and reliable technique in industry for point liquid level sensing and control in open or pressurized vessels. It offers trouble free service in conductive/non-conductive liquids under widely varying temperatures, pressure, liquid viscosities and corrosive conditions. Besides, it provides high repeatability and effect of shocks/vibrations is minimal. Construction & OperationSimple and sturdy construction, consisting of a float and guide tube, made of nonmagnetic material to achieve an undisturbed magnetic flux. The float has a magnetic system within it and moves freely along the guide tube, which contains glass encapsulated hermetically sealed switches, located at preset positions. Reliability of float movement is achieved through suitable clearance between it and the tube. Float follows the liquid level and magnetically actuates the contacts to give an electrical signal, which in turn can operate remote alarm or a relay to control auxiliary devices like solenoid/motorized valve or pump motor starters. Single/multiple switching is possible through a single float, however to suit specific applications, multiple floats can be employed. The Tube Type Liquid Level Controller is available in various materials and construction styles to suit wide variety of medias/applications. InstallationsMounted internally or externally through a chamber. External mounting adopted to overcome limited space within the tank or where mechanical devices like stirrers operate or where isolation tank is required for regular servicing. It can be installed vertically from top to bottom. Side installation is also possible with slight modification. Control UnitContains electronics and comes separate as an accessory to the sensor. To allow low power switches to control high amperage or voltage devices. Or To convert non-latching switch outputs into latching alarm outputs. The relay provided in the Controller is of 5 Amp. Capacity. On no account must a switch be used for the direct starting of burners, heaters, motor pumps, alarm, it is essential that the contacts are wired in series with the relay coil (N/V coil) in a contactor starter.
Applications
Therefore the instruments are suitable for a wide range of applications for the chemicals and pharmaceutical industries for the petrochemical Industry refineries, oil and fuel tanks, storage tanks etc. Features
Specifications
Installation | Top, Bottom or Side |
---|---|
Terminal Housing | Weathproof/Ex-proof in Aluminium with ¾" NPT cable alternatively plug-in type connector or epoxy potting with extended wires |
Guide Tube | Normally 304 SS / 316 SS / PP upto 3 mtr length only on request |
Float | 304 SS / 316 SS / PP / PVC / Nylon in various dimensions |
Min. Sp. Gr. | 0.7 / 0.8 depending upon the float material and dimensions |
Mounting | Flanged or screwed |
Preset Levels | 1 to maximum of 6 (factory set) depending upto guide tube / float dimensions |
Differential | 12 mm - 3000 mm |
Accuracy/Repeatability | ± 2 mm / ± 1 mm |
Load/Insulation | Resistive or Inductive / PVC or PTFE insulating material to stand 150 mega-ohms at 500 VDC |
Max. Temperature | Upto 120 C depending upon guide tube/float configuration |
Max. Pressure | Upto 10 Kgs/cm depending upon guide tube/float material & thickness |
Control Unit | Remote (Wall or Panel Mounted) or Integral |
External Cage (Optional) | Flanged or screwed mounting, in MS / 304 SS / 316 SS material |
Download
We are leaders in providing the Float Liquid Level Transmitter. Our Float Liquid Level Transmitter is made from quality components and material, which enhances its usage life. The Float Liquid Level Transmitter is precalibrated at the factory, so no field calibration is required.
Outstanding Features
Introduction
Float operated liquid level transmitter, indicator and controller, comprises of a level transducer and a signal converter and is used for continuous level indication and control of any liquid, chemically compatible with the transducer material, unaffected by electrical conductivity, temperature, pressure or viscosity. The Floats are designed for variety of liquids and its unique self-cleaning construction is well suited for even sticky or dirty environments, reliability and accuracy-this is an ideal transmitter. Operating PrincipleThe Unit operates on the principle of buoyancy. During the rise and fall of liquid level, the Float moves and the magnetic field change and actuate the chain which develops a proportional voltage. The sensed voltage is fed to a transmitter for converting it to a signal of 0-5 V Dc or 4 � 20 mA. The transmitter can also be incorporated with a digital display or step less adjustable multiple alarm relays (featuring high level alarm, low level alarm, or both & low level pump (or solenoid valve) on & high level off and vice-versa. ConstructionThe transducer consists of a float and guide tube assembly in nonmagnetic material to achieve undisturbed flux. The float can be in nylon, PP or SS. No gasket or seals are used and there is only one moving part, the float assuring long trouble free life. Being entirely glandless, there is no possibility of fluid leakage into the transducer. Installation and Wiring : The transducer is mounted internally and externally through a chamber by means of a flange connection. External mounting is adopted to overcome limited space within the tank or where mechanical devices operate or where isolation tank is required for regular servicing. The Transducer is recalibrated in the factory and comes to you ready for installations. For operation of level transducer, it has to work in conjunction, with a signal converter which have line or loop powered electronics. Line powered transmitter can be incorporated with a digital display and / or adjustable multiple alarm relays. Loop powered transmitter is employed for remote signaling to a process indicator / controller.
Used In
Specifications
Measuring range | 6 Meters max |
---|---|
Accuracy at range | 1000 mm : ± 1% FS 2000 mm : ± 0.5% FS 4000 mm : ± 0.25 %n FS |
Installation | Top with 80 - 100 NB Flange in SS 304/316/pp/ptf lined |
Float | 75/100 mm Ø in SS 304/316/pp/ptfe coated |
Guide Tube | SS / ptfe : 100 oC / PP : 80 oC |
SS/ptfe coated | 15 kg/cm2g/PP : 1 kg/cm2 g |
Enclosure Protection | Weather proof to IP 65 |
Table
Signal Converter | 4 wire system | 2 Wire System |
---|---|---|
Electronics | Line powered, Nonintegral with Transducer | Loop powered, integral with transducer |
Input | Variable resistance from transducer | Variable resistance from transducer |
O/P | 4-20 mA (Optional 0-20 mA ro 0-5 DC) | 4-20 mA |
Max. Load | 400 Ohms | 400 Ohms |
Supply | 24V DC/220 V AC | 24 V DC |
Digital Display (Optional) | 3 ½ digits (% of Engg. Units) | |
Control (Optional) | Multiple stepless adjustable, O/P relays rated for 5A, 230V AC | |
Version | Wall Panel | |
Enclosure | Protection IP 30/IP 65 |
Download
Using premium packaging materials, we secure our products properly for transportation and label it properly to provide information such as address of manufacturer/distributors, MRP, quantity, etc. We have trustworthy shipping facilities available to make on time deliveries to the destination.
Malhotra Bros & Co. is a well-known Magnetic Level Switch Manufacturer and Supplier in Delhi. The Magnetic Level Switch goes through several quality-checks, which ensure its top-notch quality. The Magnetic Level Switch is an economical, maintenance free and reliable device used for high, low or intermediate point level switching. The Magnetic Level Switch is for tanks with inaccessible tops or bottoms and where insertion depths of top mounted models are exceeded. Construction & OperationCompact and rugged construction, consisting of a free moving float assembly and a switch enclosure in non-magnetic material to achieve undisturbed magnetic flux. It employs dual magnets- one carried out by the float arm and the other by the contacts carriers, housed in the switch enclosure. A change in the liquid level brings the like poles of the dual magnets opposite to each other, and resulting repulsion force ensures a change-over of contacts, of the switch housing. These Magnetic Level Switches come in various non-magnetic materials and construction styles to suit board range of medias/applications. It is designed to provide high repeatability and to minimize effects of shock, vibration & pressure.
Installation
Applications
Where a number of level switches are employed they can be supplied together with a suitable indicator and Alarm Panel embodying signal lights and an audible alarm system.
Specifications
Construction | STD. L.S. / ADJ. LS. / EXT. LS./Vertical |
---|---|
Styles | L.S. / Vertical See Saw L.S. / Miniature L.S. |
Installation | Side / Top |
Switch | Weather proof / Ex-proof |
Enclosure | with % "NPT |
Float | 304SS/3 16SS/PP |
Min. Sp. Gravity | 0.7 (STD) 0.5 (Optional) |
Mounting | Flanged or screwed |
Switch Type Capacity | Airbreak single - pole double - throw & with silver Cadmium oxide contacts A.C. 440V - 1.0 Amp. 250V - 2.5 Amp D.C. 24V-2.5 Amp. 240 V - 0.5 Amp. |
Switch | Fixed / Adjustable in steps from |
Differential | 10 - 300 mm depending upon float size/arm extension/cam positioning |
Accuracy/Repeatability | ± 2 mm / ± mm |
Load / Insulation | Resistave / 150 Magaohms at 500 V.D.C |
Max.Temperature | Upto 210 oC depending upon float / switch element configurations |
Max. Pressure | Upto 20 kgs/cm2 depending upon float Materials & dimensions |
External Cage (Optional) | Flanged or screwed mounting in MS / 304 SS / 316 S3 material |
Ordering Information
Continuous development of our products may necessitate changes in these details without notice.
Precautions
On no account must a switch be used for the direct starting of burners, heaters, motors-pumps, alarms, it is essential that the contacts are wired in series with the relay coil (N/V coil) in a contactor starter.
Trouble Shooting
Maintenance
Download
We are reckoned as a Float Liquid Level Indicator Manufacturer and Supplier in Delhi. Our Float Liquid Level Indicator is made from quality components and material, which make it durable. The Float Liquid Level Indicator is used for providing a proper and continuous indication of level of different types of liquid. The Float Liquid Level Indicator is designed for working with a diverse range of liquids. The reliable Float Liquid Level Indicator comes at economical price.
Outstanding Features
Useful For
Introduction
Float operated liquid level transmitter, indicator and controller, comprises of a level transducer and a signal converter and is used for continuous level indication and control of any liquid, chemically compatible with the transducer material, unaffected by electrical conductivity, temperature, pressure or viscosity. Operating PrincipleThe Unit operates on the principle of buoyancy. During the rise and fall of liquid level, the Float moves and the magnetic field changes & actuates the chain which develops a proportional voltage. The sensed voltage is fed to a transmitter for converting it to a signal of 0-5 V Dc or 4 20 mA. The transmitter can also be incorporated with a digital display or step less adjustable multiple alarm relays (featuring high level alarm, low level alarm, or both & low level pump (or solenoid valve) on & high level off and vice-versa. ConstructionThe transducers consist of a float and guide tube assembly in non-magnetic material to achieve undisturbed flux. The float can be in nylon, PP or SS. No gasket or seals are used and there is only one moving part, the float assuring long trouble free life. Being entirely glandless, there is no possibility of fluid leakage into the transducer. Installation and WiringThe transducer is mounted internally and externally through a chamber by means of a flange connection. External mounting is adopted to overcome limited space within the tank or where mechanical devices operate or where isolation tank is required for regular servicing. The Transducer is precalibrated in the factory and comes to you ready for installation. For operation of level transducer, it has to work in conjunction, with a signal converter which have line or loop powered electronics. Line powered transmitter can be incorporated with a digital display and / or adjustable multiple alarm relays. Loop powered transmitter is employed for remote signaling to a process indicator / controller.
Specifications
Measuring range | 6 Meters max |
---|---|
Accuracy at range | 1000 mm : ± 1% FS 2000 mm : ± 0.5% FS 4000 mm : ± 0.25 %n FS |
Installation | Top with 80 - 100 NB Flange in SS 304/316/pp/ptf lined |
Float | 75/100 mm Ø in SS 304/316/pp/ptfe coated |
Guide Tube | SS / ptfe : 100 oC / PP : 80 oC |
SS/ptfe coated | 15 kg/cm2g/PP : 1 kg/cm2 g |
Enclosure Protection | Weather proof to IP 65 |
Table
Signal Converter | 4 wire system | 2 Wire System |
---|---|---|
Electronics | Line powered, Nonintegral with Transducer | Loop powered, integral with transducer |
Input | Variable resistance from transducer | Variable resistance from transducer |
O/P | 4-20 mA (Optional 0-20 mA ro 0-5 DC) | 4-20 mA |
Max. Load | 400 Ohms | 400 Ohms |
Supply | 24V DC/220 V AC | 24 V DC |
Digital Display (Optional) | 3 ½ digits (% of Engg. Units) | |
Control (Optional) | Multiple stepless adjustable, O/P relays rated for 5A, 230V AC | |
Version | Wall Panel | |
Enclosure | Protection IP 30/IP 65 |
Download
We are known as a trusted Magnetic Liquid Level Indicator Manufacturer and Supplier in Delhi, offering a well-tested range. The Magnetic Liquid Level Indicator is made from quality components, which make it more durable and reliable. The Magnetic Liquid Level Indicator is known for its smooth and accurate operation. Our Magnetic Liquid Level Indicator comes at competitive prices. IntroductionLevel Indicators are laterally to be flanged to the tank as a communicating pressure resistant vessel and serve for level measurement and supervision of liquids and liquefied gases in open and closed tanks. These can be used when instruments with high resistance to pressure and temperature are required or if sight glasses or similar indication parts for reasons of security cannot be used. This measuring system is preferred because there is a safe pressure and gastight separation between measuring and indication part. Therefore, the instruments are suitable for a wide range of applications for the chemicals and Pharmaceutical industries for the petrochemical industry, refineries, oil and fuel tanks, storage tanks, etc. In a communicating float cage which can be flanged to a tank is a cylindrical Float of stainless steel or plastic. A permanent magnet forms part of the float. Outside the liquid on the dry side a Magnetic Level Indication is fitted to the float cage.
Model Number Description
Applications
Therefore, the instruments are suitable for a wide range of applications for the chemicals and Pharmaceutical industry, refineries, oil and fuel tanks, storage tanks, etc.
Specifications
Process connection | 1" Std Flange |
---|---|
Float cage | 304/316 SS / PP / Nylong |
Centre to centre Distance | 0.5 M.1.5 M and 2M Distance upto 6M can be supplied for special requirements |
Operaying Pressure | 10 kg/cm2 for style 1 & 15 kg/cm2 for style 2 |
Operating Temp. Indication | 150 oC Magnetic rollers : Model ML - R Drag Magnet : Model ML - D |
Measuring Accuracy | ± 5 mm |
Auto control (optional) | Pump starts at Low level, trips at high level & Vice-versa |
Alarms (optional) | High and low level Alarms can be provided. Transisterised relay (optional) having SPDT contact of 5 Amp. 230 C. ac |
Download
We understand that the use of finest grade raw material brings forth high quality product line. In addition to this, we make sure that the material is sourced from the reliable places only. Be it online or cash deposit, the financial operations are carried out only under the stern management, supervision of professionals. To make our payment procedures highly secured, we make use of the leading technologies to avoid any fraud.
We are a Manufacturer and Supplier of Float Liquid Level Controller. The Float Liquid Level Controller is made from quality components and material. The Float Liquid Level Controller provided by us is durable and delivers consistent performance. The Float Liquid Level Controller comes at leading market price.
Outstanding Features
Introduction
Float operated liquid level transmitter, indicator and controller, comprises of a level transducer and a signal converter and is used for continuous level indication and control of any liquid, chemically compatible with the transducer material, unaffected by electrical conductivity, temperature, pressure or viscosity. The Floats are designed for variety of liquids and its unique self-cleaning construction is well suited for even sticky or dirty environments, reliability and accuracy-this is an ideal transmitter. Operating PrincipleThe Unit operates on the principle of buoyancy. During the rise and fall of liquid level, the Float moves and the magnetic field changes & actuates the chain which develops a proportional voltage. The sensed voltage is fed to a transmitter for converting it to a signal of 0-5 V Dc or 4 20 mA. The transmitter can also be incorporated with a digital display or step less adjustable multiple alarm relays (featuring high level alarm, low level alarm, or both & low level pump (or solenoid valve) on & high level off and vice-versa. ConstructionThe transducer consists of a float and guide tube assembly in non-magnetic material to achieve undisturbed flux. The float can be in nylon, PP or SS. No gasket or seals are used and there is only one moving part, the float assuring long trouble free life. Being entirely glandless, there is no possibility of fluid leakage into the transducer. Installation and WiringThe transducer is mounted internally and externally through a chamber by means of a flange connection. External mounting is adopted to overcome limited space within the tank or where mechanical devices operate or where isolation tank is required for regular servicing. The Transducer is precalibrated in the factory and comes to you ready for installation. For operation of level transducer, it has to work in conjunction, with a signal converter which have line or loop powered electronics. Line powered transmitter can be incorporated with a digital display and / or adjustable multiple alarm relays. Loop powered transmitter is employed for remote signaling to a process indicator / controller.
Ideal For
Specifications
Measuring range | 6 Meters max |
---|---|
Accuracy at range | 1000 mm : ± 1% FS 2000 mm : ± 0.5% FS 4000 mm : ± 0.25 %n FS |
Installation | Top with 80 - 100 NB Flange in SS 304/316/pp/ptf lined |
Float | 75/100 mm Ø in SS 304/316/pp/ptfe coated |
Guide Tube | SS / ptfe : 100 oC / PP : 80 oC |
SS/ptfe coated | 15 kg/cm2g/PP : 1 kg/cm2 g |
Enclosure Protection | Weather proof to IP 65 |
Table
Signal Converter | 4 wire system | 2 Wire System |
---|---|---|
Electronics | Line powered, Nonintegral with Transducer | Loop powered, integral with transducer |
Input | Variable resistance from transducer | Variable resistance from transducer |
O/P | 4-20 mA (Optional 0-20 mA ro 0-5 DC) | 4-20 mA |
Max. Load | 400 Ohms | 400 Ohms |
Supply | 24V DC/220 V AC | 24 V DC |
Digital Display (Optional) | 3 ½ digits (% of Engg. Units) | |
Control (Optional) | Multiple stepless adjustable, O/P relays rated for 5A, 230V AC | |
Version | Wall Panel | |
Enclosure | Protection IP 30/IP 65 |
Download