MAKSIM ALLOYS has the inclination to have sound business ties and would appreciate receiving your valued business. We are committed to render you better services with prompt attention at all the times. We have installed capacity of 2000 MT/Year Finished casting. We have installed Medium Frequency Induction melting furnace, Molding and Felting facilities, Laboratory, and other Foundry equipment. We have over a decade of experience of running Ferrous Foundries. We can provide castings with machined / finish up to 1500 kg single piece weight. QUALITY ASSURANCE Total conformance to the highest standards of quality has always been the routine practice at MAKSIM ALLOYS since its inception. Steps are being taken to evolve into a highly efficient lean enterprise. Some of the salient features of our quality assurance practice are: ● All the castings manufactured bear a unique Heat No. on un-machined surface which helps us maintain a precise traceability of the material used and processes involved. ● All the vendors and sub-contractors/service providers are selected after a careful examination and test orders. Yet, periodic and random checks are performed at regular intervals. ● Procedure-matrices are made to perform each and every process involved by qualified personnel and are strictly adhered to. ● We have achieved our target of less than 1% rejection in past two years, and our next target is to bring it to less than 0.25%. ● More than 92% of orders are delivered on-time. DESIGN & PATTERN MAKING SHOP We have an in-house pattern shop with state-of-the-art design and modeling facilities. We benchmarked ourselves in making patterns with accurate dimensions, and tolerances. Depending on lifetime and purpose, the patterns are made accordingly of suitable materials and precise designs. ● Wood, aluminum, epoxy, plastics, and Styrofoam ● Complete flexibility to use existing pattern equipment and core boxes ● Custom designed gating systems ● Complete layout and maintenance MOULDING SHOP The moulding process is rather diversified, and depends on the design, complexity, weight and accuracy of the casting. Therefore we have pneumatic rammers and sand compactors for hand and machine moulding, employing green, Co2, no bake & oil sand systems enabling to meet broad range of requirements, in quality as well as in quantity. MELTING SHOP Equipped with “INDUCTOTHERM” make 750 KW medium frequency induction furnace with two crucibles each of 1 tone and 2 tones. We also have “ELECTROTHERM” make, 150 KW, medium frequency induction furnace with two crucibles - each of 400 kg & 250 kg Nominal capacity for smaller application. FETTLING SHOP Well equipped with heavy duty swing frame grinders, flexible shaft grinders, sanders, pneumatic chippers and so on. CHEMICAL & PHYSICAL TESTING LABORATORY Well equipped chemical testing by gravi-metric system for chemical analysis, Rockwell & Poldy hardness testers for hardness testing. We also have a strong tie-up with a reputed and accredited material testing laboratory for spectro-analysis and other physical testing. PRODUCT RANGE MAKSIM ALLOYS possesses experience and expertise in production of stainless steel and nickel based alloy castings up to 1500 kg. We also manufacture custom alloys as per customers’ requirements. We have an in house team that can suggest an alloy to our customers for given applications. THE CASTINGS RANGE ARE BELLOW : Extra low carbon stainless steels : We have developed 0.03 max stainless steels like CF3M, 904L (equivalent to alloy 20 with 0.03 carbon). Marine service corrosion Resistant castings : Corrosion resistant cast iron for marine services like Austenitic spheroidal graphite cast irons like Ni-resist D2, D2C AUS205 and others. Hastelloys : We have developed Hastelloy B & C for handling highly corrosive chemicals. Nickel castings : Ni castings as per CZ100 used for handling caustic soda and other chemicals. Martensitic & Ferritic steels : Grades like CA15(410), CC50, CB30 generally used in wear rings, seat rings and other trim materials in pumps & valves have also been developed. Cryogenic application : Grades LCB, LCC, CA6NM required for sub-zero temperature requiring impact testing at –27degree, -45degree C temperature have also been developed. High temperature service pressure parts : Grades ranging WC1 to WC11and C5 to CA15 under from ASTM A217 are developed. These are required for high temperature service for pressure containing parts like pumps & valves. Abrasion resisting steels and cast irons : We have a long experience in producing complete range of Ni-Hard, high chrome steels and cast iron required for slurry and ash slurry applications. Heat Resistant Alloy Castings: good surface film stability (oxidation and corrosion-resistant) in various atmosphere and at the temperature to with necessary mechanical strength and ductility to meet high temperature service conditions. H N BAHOPIA(B E Met) Cell#+91-9825048855

MAKSIM ALLOYS has the inclination to have sound business ties and would appreciate receiving your valued business. We are committed to render you better services with prompt attention at all the times. We have installed capacity of 2000 MT/Year Finished casting. We have installed Medium Frequency Induction melting furnace, Molding and Felting facilities, Laboratory, and other Foundry equipment. We have over a decade of experience of running Ferrous Foundries. We can provide castings with machined / finish up to 1500 kg single piece weight. QUALITY ASSURANCE Total conformance to the highest standards of quality has always been the routine practice at MAKSIM ALLOYS since its inception. Steps are being taken to evolve into a highly efficient lean enterprise. Some of the salient features of our quality assurance practice are: ● All the castings manufactured bear a unique Heat No. on un-machined surface which helps us maintain a precise traceability of the material used and processes involved. ● All the vendors and sub-contractors/service providers are selected after a careful examination and test orders. Yet, periodic and random checks are performed at regular intervals. ● Procedure-matrices are made to perform each and every process involved by qualified personnel and are strictly adhered to. ● We have achieved our target of less than 1% rejection in past two years, and our next target is to bring it to less than 0.25%. ● More than 92% of orders are delivered on-time. DESIGN & PATTERN MAKING SHOP We have an in-house pattern shop with state-of-the-art design and modeling facilities. We benchmarked ourselves in making patterns with accurate dimensions, and tolerances. Depending on lifetime and purpose, the patterns are made accordingly of suitable materials and precise designs. ● Wood, aluminum, epoxy, plastics, and Styrofoam ● Complete flexibility to use existing pattern equipment and core boxes ● Custom designed gating systems ● Complete layout and maintenance MOULDING SHOP The moulding process is rather diversified, and depends on the design, complexity, weight and accuracy of the casting. Therefore we have pneumatic rammers and sand compactors for hand and machine moulding, employing green, Co2, no bake & oil sand systems enabling to meet broad range of requirements, in quality as well as in quantity. MELTING SHOP Equipped with “INDUCTOTHERM” make 750 KW medium frequency induction furnace with two crucibles each of 1 tone and 2 tones. We also have “ELECTROTHERM” make, 150 KW, medium frequency induction furnace with two crucibles - each of 400 kg & 250 kg Nominal capacity for smaller application. FETTLING SHOP Well equipped with heavy duty swing frame grinders, flexible shaft grinders, sanders, pneumatic chippers and so on. CHEMICAL & PHYSICAL TESTING LABORATORY Well equipped chemical testing by gravi-metric system for chemical analysis, Rockwell & Poldy hardness testers for hardness testing. We also have a strong tie-up with a reputed and accredited material testing laboratory for spectro-analysis and other physical testing. PRODUCT RANGE MAKSIM ALLOYS possesses experience and expertise in production of stainless steel and nickel based alloy castings up to 1500 kg. We also manufacture custom alloys as per customers’ requirements. We have an in house team that can suggest an alloy to our customers for given applications. THE CASTINGS RANGE ARE BELLOW : Extra low carbon stainless steels : We have developed 0.03 max stainless steels like CF3M, 904L (equivalent to alloy 20 with 0.03 carbon). Marine service corrosion Resistant castings : Corrosion resistant cast iron for marine services like Austenitic spheroidal graphite cast irons like Ni-resist D2, D2C AUS205 and others. Hastelloys : We have developed Hastelloy B & C for handling highly corrosive chemicals. Nickel castings : Ni castings as per CZ100 used for handling caustic soda and other chemicals. Martensitic & Ferritic steels : Grades like CA15(410), CC50, CB30 generally used in wear rings, seat rings and other trim materials in pumps & valves have also been developed. Cryogenic application : Grades LCB, LCC, CA6NM required for sub-zero temperature requiring impact testing at –27degree, -45degree C temperature have also been developed. High temperature service pressure parts : Grades ranging WC1 to WC11and C5 to CA15 under from ASTM A217 are developed. These are required for high temperature service for pressure containing parts like pumps & valves. Abrasion resisting steels and cast irons : We have a long experience in producing complete range of Ni-Hard, high chrome steels and cast iron required for slurry and ash slurry applications. Heat Resistant Alloy Castings: good surface film stability (oxidation and corrosion-resistant) in various atmosphere and at the temperature to with necessary mechanical strength and ductility to meet high temperature service conditions. H N BAHOPIA(B E Met) Cell#+91-9825048855