Mahindra-Tsubaki developed flexible & compact Mahindra Bulk Feeder (MBF) to satisfy the demand of customers to receive general bulk material directly from tipping trucks eliminating fixed civil works, deep pits and underground hoppers. MBF is a combination of wide slats & belt which provides the strength of apron feeder & flexibility of belt conveyor. Wide Slat belt design permits low loading heights which allows truck to discharge directly to the entry section of MBF with a small access ramp.

FEATURES

Designed to convey wide variety of coal with various characteristics.

Coal is conveyed by single / double strand forged / case-hardened chain links. Wear resistant guide rails are provided in conveying and return path. Specially designed flight attachment are welded/bolted to the chain links.

Chain links are case carburized and heat-treated to 60 RC average having depth of 0-2 mm

Consists of models MF -550 to MF 1200 D (indicative inside width)

Supplied conveyors with Capacity range up to 312 m3/hr.

The casings are totally enclosed, rugged, dust-tight construction.

Head and tail sprockets are precision-machined and are induction-hardened at teeth flank. Sprockets are of segmented rim construction.

Offers flexibility in the plant layout viz. horizontal & Straight Inclined as required.

Multiple numbers of inlet and discharge openings can be provided at the required locations along the feeder path.

Special Screw type Take Up with Springs is provided for automatic tensioning during operation.

Special Features such as Rod Gate , Plate type slide gate , Motorised gate and additional feature such as Flow No Flow switch and Sprocket Cleaning device are also provided for efficient performanceof the feeders.

Provided with safety switches such as zero speed switch, electronic shock relay.

FEATURES

Used for extracting material from storage hopper and delivering it at controlled rate to the down-stream conveyor system.

Uses TSUBAKI make pin, bush & roller type chain with special attachments. Smaller pitch and precision construction of the chain ensures minimum noise and vibration.

Pressed pans are bolted to the chain attachments.

Thickness of the Apron feeder pans is selected based on the duty conditions and the type of material handled (thickness up to 12 mm). Optimal overlapping of the Pans is provided so that there is no leakage of material from the feeder.

A dribble conveyor is provided below the main conveyor transporting the fines into the main discharge chute.

Rod gate is provided above the apron feeder for controlling the material feed rate.

The feeder has sturdy and rugged construction and is designed to withstand impact load resulting from large sized lumps falling into the Pans from the storage silo, above.

Provided with safety switches such as zero speed switch, electronic shock relay.

Mahindra-Tsubaki developed flexible & compact Mahindra Bulk Feeder (MBF) to satisfy the demand of customers to receive general bulk material directly from tipping trucks eliminating fixed civil works, deep pits and underground hoppers. MBF is a combination of wide slats & belt which provides the strength of apron feeder & flexibility of belt conveyor. Wide Slat belt design permits low loading heights which allows truck to discharge directly to the entry section of MBF with a small access ramp.

FEATURES

Designed to convey wide variety of coal with various characteristics.

Coal is conveyed by single / double strand forged / case-hardened chain links. Wear resistant guide rails are provided in conveying and return path. Specially designed flight attachment are welded/bolted to the chain links.

Chain links are case carburized and heat-treated to 60 RC average having depth of 0-2 mm

Consists of models MF -550 to MF 1200 D (indicative inside width)

Supplied conveyors with Capacity range up to 312 m3/hr.

The casings are totally enclosed, rugged, dust-tight construction.

Head and tail sprockets are precision-machined and are induction-hardened at teeth flank. Sprockets are of segmented rim construction.

Offers flexibility in the plant layout viz. horizontal & Straight Inclined as required.

Multiple numbers of inlet and discharge openings can be provided at the required locations along the feeder path.

Special Screw type Take Up with Springs is provided for automatic tensioning during operation.

Special Features such as Rod Gate , Plate type slide gate , Motorised gate and additional feature such as Flow No Flow switch and Sprocket Cleaning device are also provided for efficient performanceof the feeders.

Provided with safety switches such as zero speed switch, electronic shock relay.

FEATURES

Used for extracting material from storage hopper and delivering it at controlled rate to the down-stream conveyor system.

Uses TSUBAKI make pin, bush & roller type chain with special attachments. Smaller pitch and precision construction of the chain ensures minimum noise and vibration.

Pressed pans are bolted to the chain attachments.

Thickness of the Apron feeder pans is selected based on the duty conditions and the type of material handled (thickness up to 12 mm). Optimal overlapping of the Pans is provided so that there is no leakage of material from the feeder.

A dribble conveyor is provided below the main conveyor transporting the fines into the main discharge chute.

Rod gate is provided above the apron feeder for controlling the material feed rate.

The feeder has sturdy and rugged construction and is designed to withstand impact load resulting from large sized lumps falling into the Pans from the storage silo, above.

Provided with safety switches such as zero speed switch, electronic shock relay.