Mahima Fabricators

Amraiwadi, Ahmedabad, Gujarat

• Max. tablet diameter20 mm
• Net weight115 kg
• Gross weight145 kg
• ModelKEEDD
• Electric motor0.18 KW, 3 phase, 415 VAC, 50 HZ
• Machine Dimension in mm400 x 800 x 400
• Min. tablet diameter5 mm
• Output8000 to 2,00,000 tab/ hr
• Through put of the tablet5 to 120 seconds

• Model NumberTurbo Model
• ImpellerMade out of Aluminium Die Casting
• BodyMade out of S S 304
• Suction Capacity300 M (500 Mtr. Cube / Hr.) at 125 mm W.G.
• Dust Storage Capacity45 Liters.
• Vacuum165 M Bar Max
• Electric Motor2 HP, 2800 RPM, 3 Phase, 50 Hz
• Pressure200 M Bar/ 2.80 PSI Max
• Net Weight65000 Kgs
• ShakerManual
• Filtration AreaAs per your requirement such as from 3 micron to 10 micron
• Fan AssemblyMade out of Aluminium Casting
• Capacity300 M続/Hr / 177 Cfm Max

• Min. tablet diameter4 mm
• Case Dimension65 x 55 x 130 mm
• Net weight110 kg
• Output* (for 8 mm tablet)5000 to 2,50,000 tab/ hr
• ModelKEEDD
• Overall Dimension550 x 45 x 115 mm Min/ 130 Max
• Power supply0.18 KW, 3 phase, 415 VAC, 50 HZ
• Max. tablet diameter20 mm
• Conveying height differential235 mm
• Gross weight190 kg

COLLOID MILL is suitable for homogenizing emulsifying dispersing, mixing, comminuting of liquids to highly viscous products. It is based on rotor stator principle, It is avail OPERATIONS:- Product is feed to the operating areas of a rotor, having a speed of 3000 R.P.M by specially designed feed device. The product is processed by high sheer, pressure and friction between the stator and rotor , the angular gap becomes narrower towards the discharges section. This processed product continuously leaves the mill through the drain pipe, if required, it can be re circulated SALIENT FEATURES : All contact parts are made out of S.S. 304 (S.S. 316 on demand at extra cost). No castings are used to avoid contamination problems. • 2 Coupling provided between motor shaft and rotor shaft for ease in maintenance. 3 Three leak proof neoprene sealing device between the motor and the processing chamber to prevent liquid going in the motor winding. 4 Modified design of semi concave teeth in rotor and stator reduces motor h.p. and gives better performance in size reduction without damaging the products. 5 Extended bearing housing specially designed to facilitate fine metal contact of rotor and stator. 6 This unique design provides smooth and consistence all around performance and long life of rotor and stator. 7 Three way cock system for draining and recirculation of the liquids provided as standard. 8 Extra discharge sprout provided as a standard for viscous products. 9 DOL starter with overload relay for protection against single phasing and low voltage. 10 Contact parts can be easily dismantled for cleaning.

• Power0.75 HP / 2880 RPM / 3 Phase / 440 V / 50 Hz
• Manifoldsmm 02
• Dust Storage Capacity20 Lts.
• Case Dimensions600 x 500 x 750 H
• Filteration Area0.8 sq mtr (approx)
• Suction Capacity150 C.F.M. (500 m3 / hr) at 125 mm W.G.
• Overall Dimensions520 x 460 x 700 H
• Net Weight90 Kgs.
• Gross weight115 Kgs.