BROILTECH precision digiatl oval gear positive displacement flow meter available with RS485PulseCurrentHart output and inbuild flowrate and totalize digital display positive displacement flow measurment with two oval shape gear, Gear rotate when flow pass on measuring chamber andmore...
BROILTECH diesel engine fuel consumption meter is creation from two fuel flow sensor and one fuel calculator, full product is design, developed and tested by broiltech, and successfully run from last three years. Broiltech fuel sensor is oval gear flow sensor, its measure and calmore...
BROILTECH Thermal mass flow meter for detection and metering the gas and air. Its work on principal of calorie amount taken away from the heated sensor by a fluid flow is calibrated to the mass of flow, Thermal mass flow meter use for measuring : air, nitrogen, argon, co2, chlorimore...
helical rotor Digital Water Meter design is proven for best accuracy and low pressure loss than turbine and oval gear, so customer got more flow rate and low power consumption, its also not effected on viscosity of liquied and temp. change. also full meter design so its work likemore...
conventional turbine flow sensor and meter for low viscous liquid and gas application, turbine flow sensor model no defined in two category, heavy duty turbine flow sensor and meter : its a fully Stainless steel meter with carbide bearing and available from 4 mm to 400 mm line simore...
ULTRASONIC FLOW METER. Product Code : MUF 2005 Hand Hold Ultrasonic Flow Meter Media : Water Pipeline size : For M 50mm to 700 mm Temp : 0 -160 C S 15 mm to 100 mm Temp : 0 - 90 Cmore...
Body Materials : Aluminium, ductile iron or steel. Compliant with the Pressure Equipment Directive 2014/68/EU
Maximum Working Pressure : Up to 100 bar depending on the body material and flanging
Flow rate : From 0.25 m3/h to 1000 m3/h, G10 to G650
Intrinsic Safety Approval : L.C.I.E. 06 ATEX 6031 X - Compliant with the Directive 2014/34/EU
Temperature Range ATEX/PED : -30° C to +60° C MID : -25° C to +55° C Storage temperature : -40° C to +70° C Metrology In accordance with MID and OIML, large rangeability up to 1:200. Compliant with the Measuring Instrument Dimore...
Flow rate : From 0.25 m3/h to 1000 m3/h, G10 to G650
Body Materials : Aluminium, ductile iron or steel. Compliant with the Pressure Equipment Directive 2014/68/EU
Color : Grey
Maximum Working Pressure : Up to 20 bar depending on the body material and flanging
Nominal Diameters : DN 25 to DN 150 (1” to 6”)
Temperature Range ATEX/PED : -30° C to +60° C MID : -25° C to +55° C Storage temperature : -40° C to +70° C Metrology In accordance with MID and OIML, large rangeability up to 1:200. Compliant with the Measuring Instrumore...