Our Products
Coupling
2 Products availableEvaporators & Dryers
2 Products availableLaboratory Equipments
1 Products availableMachines And Equipments
1 Products availableChemical Equipment
1 Products availablePipeline Accessories
1 Products availableGaskets
1 Products availableWe offer the best product range of Column Component, Valve And Filter, Pipeline Component, Distillation Overhead Assembly and liquid Extraction Unit.
Rota Evaporator depends on various parameters like temperature differential between bath and contents of flask, RPM, flask capacity and working pressure. An indicative comparison of boil-up of CCI4 rates for 20L, 50L and 100L is given in adjacent figure.
Model | MSGI2 | MSGI3 | MSGI5 | MSGI10 | MSGI20 | MSGI50 | MSGI100 |
Rotating Flask Capacity (ltrs) |
2 | 3 | 5 | 10 | 20 | 50 | 100 |
Rotating Speed (rpm) |
0-80 | 0-80 | 0-80 | 0-80 | 0-80 | 0-80 | 0-80 |
Electric Motor Rating (HP) |
0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.5 | 0.5 |
Condenser Cooling Surface Area (m2) |
0.10 | 0.15 | 0.20 | 0.20 | 0.30 | 0.50 | 1.0 |
Receiver Flask Capacity (ltrs) |
1 | 1 | 2 | 5 | 10 | 20 | 20 |
Power Supply (Volt/Hz) |
230 V, 50 Hz |
230 V, 50 Hz |
230 V, 50 Hz |
230 V, 50 Hz |
230 V, 50 Hz |
230 V, 50 Hz |
230 V, 50 Hz |
Bath Rating (KW) |
2 | 2 | 2 | 4 | 4 | 6 | 8 |
Couplings are a strong heavy-duty system that provides maximum reliability with minimum need for maintenance. This is achieved by use of easy to install corrosion resistant gaskets and carefully dimensioned individual parts of the coupling. The material of construction is selected based on the type of products being handled the atmospheric conditions of installation area. For GMP application SS coupling with SS nuts bolts are used.
The complete range of standard components available is described on the following pages. Non-standard components can also be supplied against special orders.
Column components provide the optimum solution for every requirement such as distillation, absorption, reaction, rectification & extraction because of wide range of different components available. This applies not only to various types of column & pipe sections available but also to the wide selection of internals & packing that can be supplied. The transparency factor of glass column is a particular advantage in visual monitoring of the process at all times.
The complete range of standard column components is descried on the following pages, of the support. Non-standard components can also be supplied as per your order.
Valves & Filters can be relied upon to require minimum maintenance& to provide maximum reliability. They provide relatively easy on off function to control flow & pressure relief.
All wetted parts of valves & filters are made of borosilicate glass 3.3 & PTFE or PFA, which ensures maximum resistance to corrosion. In addition valve glass body provides visual monitoring of valve operation at all times.
The complete range of standard valves is described in following pages
All wetted parts of valves & filters are made of borosilicate glass 3.3 & PTFE or PFA, which ensures maximum resistance to corrosion. In addition valve glass body provides visual monitoring of valve.
Borosilicate glass 3.3 pipeline is widely used in chemical, pharmaceutical, dyes & allied industries such as food & drink production & electroplating units.
The main reasons for wide acceptance of borosilicate glass 3.3 are because of [a] Universal resistance to almost all chemicals resulting in reduced contamination risk, [b] Transparency for ease of visual monitoring of the process [c] Smooth surface allows easy cleaning & sterilization of systems. This guarantees long service life & minimal maintenance requirements.
The complete range of standard pipeline component is described here under. Non-standard components can also be supplied against your order. Many of the components listed in this section are also used in design of process plants. For example pipe sections are used in columns, reducers are used as top & bottom components in columns and feed pipes are fitted on reducing tees. For end finishing available please refer to section Technical Information.
Specifications
| |||||||||
Unit Cat. Ref. | Reactor Capacity | Bath KW | Vapour Line | Exctraction Vessel | Condenser IV17 | ||||
---|---|---|---|---|---|---|---|---|---|
SLU10 | 10 L | 3 | 40mmX1m | 10L | 0.35 | ||||
SLU2O | 20 L | 4.5 | 50mmx1rn | 20L | 0.5 | ||||
SLU50 | 50 L | 6 | 80mmx1rn | 30L | 1.5 |
| |
|
| |
|
We are offering sight glass that is manufactured as per international quality standards. This sight glass is specially constructed in a way that provides complete view from every angle. Moreover, we can supply sight glass using ms, ss304, ss316 frame with any standard drilling.Sight glass is a device used between any kind of non transparent pipeline to observe the flow of liquid. This can be used both in horizontal as well as vertical pipeline. Sight glass is constructed in such a way that it gives a complete view from every angle.
A sight glass consists of one glass pipe section, one metal frame, a pair of PTFE bushes and washers and an acrylic cover. Borosilicate pipe section is highly heat resistant, has excellent chemical resistance and has low thermal expansion. Metal frame is composed of two flanges which are welded with studs so that the stresses and vibrations of the pipeline do not transfer to the glass pipe section. Its check nut keeps the glass pipe section in compression and provides ease in replacement.
PTFE bushes on both sides of glass pipe section ensures that liquid in the pipeline does not come in contact with metal frame. PTFE washers are used as gaskets while fitting the sight glass in the pipeline. Acrylic cover covers the glass pipe section and protects it from outer damages.
Sight glass can be supplied with MS/SS304/SS316 frame with any standard drilling.
Sight er>Glass Consists Of |
|
---|---|
Features |
|
| |
|
| |
|
Specifications
| |||||||||
Unit Cat. Ref. | Reactor Capacity | Bath KW | Vapour Line | Exctraction Vessel | Condenser m2 | ||||
---|---|---|---|---|---|---|---|---|---|
LLU10 | 10 L | 3 | 40mmX1rn | 10L | 0.35 | ||||
LLU20 | 20 L | 4.5 | 50mmx1m | 20L | 0.5 | ||||
LLU50 | 50 L | 6 | 80mmx1m | 30L | 1.5 |
Structure are designed to support plant and other equipments in borosilicate glass 3.3. These structures are available in the form of modular system that not only meet standard requirement but also facilitate solutions for problems of unique nature. These structures consist of steel tubings, which are connected using the appropriate fittings. As a result these structure can be assembled, dismantled, expanded or modified very easily & quickly. Standard support is made of G.I. tubes with C.I. fittings. For GMP application SS pipes with SS fittings are used.
| |
|
We offer Heat Cool Circulation System. Constant heating / cooling circulating system is designed for the jacketed- glass reactor to heat / cool. Heating or cooling swiftly; the working temperature set as you desired.
Trait:
It is integrated heating, cooling and circulating into one system. Heating or cooling swiftly. It is an electrical energized equipment, operating easily.
May operate to react between 30+200 continuously without replacing the circulating liquid when fitted the special system supplied by our factory .
Data
Voltage: 220 V
Capacity: 30 L
Measurement: 90 x 60 x 85 cm
Temp. area: Room temp . 180
Heating Power: 6 KW
Circulating volume: 15 L / m in
Net weight: 75 K G
M-S heat-liquid Circulation Series
Technical Specifications
Type/Date | Power | Temp. Area | Capacity (L) | Measurement (CM) | Note |
M-S-I | 220V | Room temp.~100*C | 20/40 | 50x55x70 | Water System |
M-S-II | 380V | Room temp.~180*C | 20 | 45x54x60 | Oil System |
M-S-III | 380V | Room temp.~180*C | 30 | 50x60x85 | May reduce to the room temp. |
| |
|
Specifications
| |||||||||||
Model | MSGI2 | MSGI3 | MSGI5 | MSGI10 | MSGI20 | MSGI50 | MSGI100 | ||||
---|---|---|---|---|---|---|---|---|---|---|---|
Rotating Flask Capacity (ltrs) | 2 | 3 | 5 | 10 | 20 | 50 | 100 | ||||
Rotating Speed (rpm) | 0-80 | 0-80 | 0-80 | 0-80 | 0-80 | 0-80 | 0-80 | ||||
Electric Motor Rating (HP) | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | ||||
Condenser Cooling Surface Area (m2) | 0.10 | 0.15 | 0.20 | 0.20 | 0.30 | 0.50 | 1.0 | ||||
Receiver Flask Capacity (ltrs) | 1 | 1 | 2 | 5 | 10 | 20 | 20 | ||||
Power Supply (Volt/Hz) | 230 V, 50 Hz | 230 V, 50 Hz | 230 V, 50 Hz | 230 V, 50 Hz | 230 V, 50 Hz | 230 V, 50 Hz | |||||
Bath Rating (KW) | 2 | 2 | 2 | 4 | 4 | 6 | 8 |