DUPLENE Brand PVC transperent tubing.(3mm-50mm)
DUPLENE brand pvc COLOUR tubing for gardening (12mm-25mm)
DUPLENE PVC transparent soft tubing for MEDICAL application (2mm-12mm)

POLYURETHANE tubing for Pnumatic application
size 2mm-12mm

Thick walled PTFE lined inside a Stainless Steel Braided Hose. Used in application which have higher pressure rating. The end fittings are flared, as a result of which the inner media does not come in contact with any metal surface. Outer thick walled stainless steel braided protection makes it ideal for applications in which the external environment may be corrosive.
Thick walled PTFE Lining makes the hose rigid, allowing minimal thermal expansion contraction, but not any flexibility.
The thickness will depend upon the applications, but more commonly the thickness of the inner lining will range from 3mm to 8mm. The plain inner surface provides beder cleanability and drain-ability, at the same time adequate outer protec1on against external corrosive environments.
Heavy walled PTFE Hose is 100% leak tested and a cost effective solution for a wide range of applications.

Hose Inner Diameter : 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1.5", 2", 3", 4", 6"Hose Length : Available as per your specifica1onDesign : Plain thick tube, without any corruga1onsPressure & Temperature : View Pressure and Temperature rating chartEnd Assemblies Type : Flanged End Connections are used more commonly with such PTFE hoses

The swimming Pool Hoses & Adaptors are vital for maintaining your Swimming Pool. The hoses connect to a pool vacuum and transfer bugs, leaves and other detritus to a filter pump system. Swimming pool vacuum hoses are essential for pools with or without a heating system, as these are powered by filter pumps and require a tubed connection.

The swimming pool hoses are available in two different sizes so that people with larger above ground pools can hoover up detritus from hard to reach areas. A swimming pool hose adaptor is also available to attach equipment to a hose or attach the hose to an inlet. It is made from corrosion proof Polyethylene Co-polymer that resists chemicals while providing superior ease of use while cleaning your pool.

To get the best from your Swimming Pool it's crucial that water is kept clean and clear of debris. For this reason, Swimming Pool Hoses & Adaptors are a must have piece of kit, enabling the operation of cleaning equipment to produce clear and healthy water.

DUTRON HDPE, MDPE and PP pipes and fittings are manufactured at state-of-the-art manufacturing plant. HDPE material is best suited against GI/DI as it is inert to most of the chemicals. Latest generation PE pipe grade raw material is used to provide ultimate strength to the product.

These have a smooth inside diameter as well as strength and durability. These are light weight and designed for maximum air flow and can be used with wide range of Blowers, Portable Evacuaters, Turbo Ventilators, Fans, Printing machines and Dryer Machines for both Positive and Negative pressure. Fire resistant and Antistatic Quality Hoses are available. These are Weather resistant Hoses.

TYPE PFFH:Flecible PVC Hose made with continuous Spring Steel Wire reinforcement Helix between Polyster Fabric Coated with PVC on both sides
.
TYPE PFFH:Spiral PVC Hose made with continuous Spring Steel Wire reinforcement helix on the outer periphery of the hose covered by PVCExtruded Wear Strip.

Aluminium Air Duct is made of aluminium High Flexibility and axial xompressibility, extension rate is 1:3:7 - Temperature range: -30C to +140CMaximum Air Flow : 30m/s Maximum Working pressure :10000 pa

ApplicationThe aluminium Chimney air duct hose is especially ideal for high temperature and low pressure ventilation system, like range hood.It can be fixed directly on the fitting .In case of fire or high temperature , there is no toxic gas.
PropertiesAluminium Foil Air Duct is made of aluminium foil and steel wire. High flexibility and axial compressibility , extension rare is around 1:10 - Aluminiumthickness :0.035mmTemperature Range: -30C to +140C Maxim Air Flow : 30 m/s , Maximum working pressure 2500 pa

Santoprene hose made with continuous Spring steel Wire/PVC. Extruder Reinforcement Helix between Unsopported Thermo Plastic Rubber/ Santoprene Cloth is abrasion resistant, holds up extremely well againsts damage by Weather , Oils and Ozone. No solvents are used in the construction of this product. Santoprene Hose produced by a process that assures a very smooth inside diameter as well as strength and durabaility.

38mm to 600mm dia in 4 to 10mtrs. Length +/-2% , Withstand temp -40C to +130C.Colour:Black


Application:Excellent choice for a wide range of applications, including exhaust, Gases from Light/Heavy Vechicles, Ventilation fume removal and light duty material handling & suitable for usein many different industrial sectors.

DWC Pipes are made of High Density Poly Ethylene Polymers. The DWC pipes shall consist of two layers, the outerand the inner layer shall be plain & smooth.

DWC pipes are available in sizes 50 mm to 200 mm.

For use in nourishing products, the suction and discharge of beer, wine, milk, beverages, ice-cream, chocolates, peppermint, cereals etc. Its total transparency allows one better visualization of the ticket of the products and, its total smooth internal face, does not allow to the setting of residues, preventing contaminations.

DUPLENE Brand PVC transperent tubing.(3mm-50mm)
DUPLENE brand pvc COLOUR tubing for gardening (12mm-25mm)
DUPLENE PVC transparent soft tubing for MEDICAL application (2mm-12mm)

POLYURETHANE tubing for Pnumatic application
size 2mm-12mm

Thick walled PTFE lined inside a Stainless Steel Braided Hose. Used in application which have higher pressure rating. The end fittings are flared, as a result of which the inner media does not come in contact with any metal surface. Outer thick walled stainless steel braided protection makes it ideal for applications in which the external environment may be corrosive.
Thick walled PTFE Lining makes the hose rigid, allowing minimal thermal expansion contraction, but not any flexibility.
The thickness will depend upon the applications, but more commonly the thickness of the inner lining will range from 3mm to 8mm. The plain inner surface provides beder cleanability and drain-ability, at the same time adequate outer protec1on against external corrosive environments.
Heavy walled PTFE Hose is 100% leak tested and a cost effective solution for a wide range of applications.

Hose Inner Diameter : 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1.5", 2", 3", 4", 6"Hose Length : Available as per your specifica1onDesign : Plain thick tube, without any corruga1onsPressure & Temperature : View Pressure and Temperature rating chartEnd Assemblies Type : Flanged End Connections are used more commonly with such PTFE hoses

The swimming Pool Hoses & Adaptors are vital for maintaining your Swimming Pool. The hoses connect to a pool vacuum and transfer bugs, leaves and other detritus to a filter pump system. Swimming pool vacuum hoses are essential for pools with or without a heating system, as these are powered by filter pumps and require a tubed connection.

The swimming pool hoses are available in two different sizes so that people with larger above ground pools can hoover up detritus from hard to reach areas. A swimming pool hose adaptor is also available to attach equipment to a hose or attach the hose to an inlet. It is made from corrosion proof Polyethylene Co-polymer that resists chemicals while providing superior ease of use while cleaning your pool.

To get the best from your Swimming Pool it's crucial that water is kept clean and clear of debris. For this reason, Swimming Pool Hoses & Adaptors are a must have piece of kit, enabling the operation of cleaning equipment to produce clear and healthy water.

DUTRON HDPE, MDPE and PP pipes and fittings are manufactured at state-of-the-art manufacturing plant. HDPE material is best suited against GI/DI as it is inert to most of the chemicals. Latest generation PE pipe grade raw material is used to provide ultimate strength to the product.

These have a smooth inside diameter as well as strength and durability. These are light weight and designed for maximum air flow and can be used with wide range of Blowers, Portable Evacuaters, Turbo Ventilators, Fans, Printing machines and Dryer Machines for both Positive and Negative pressure. Fire resistant and Antistatic Quality Hoses are available. These are Weather resistant Hoses.

TYPE PFFH:Flecible PVC Hose made with continuous Spring Steel Wire reinforcement Helix between Polyster Fabric Coated with PVC on both sides
.
TYPE PFFH:Spiral PVC Hose made with continuous Spring Steel Wire reinforcement helix on the outer periphery of the hose covered by PVCExtruded Wear Strip.

Aluminium Air Duct is made of aluminium High Flexibility and axial xompressibility, extension rate is 1:3:7 - Temperature range: -30C to +140CMaximum Air Flow : 30m/s Maximum Working pressure :10000 pa

ApplicationThe aluminium Chimney air duct hose is especially ideal for high temperature and low pressure ventilation system, like range hood.It can be fixed directly on the fitting .In case of fire or high temperature , there is no toxic gas.
PropertiesAluminium Foil Air Duct is made of aluminium foil and steel wire. High flexibility and axial compressibility , extension rare is around 1:10 - Aluminiumthickness :0.035mmTemperature Range: -30C to +140C Maxim Air Flow : 30 m/s , Maximum working pressure 2500 pa

Santoprene hose made with continuous Spring steel Wire/PVC. Extruder Reinforcement Helix between Unsopported Thermo Plastic Rubber/ Santoprene Cloth is abrasion resistant, holds up extremely well againsts damage by Weather , Oils and Ozone. No solvents are used in the construction of this product. Santoprene Hose produced by a process that assures a very smooth inside diameter as well as strength and durabaility.

38mm to 600mm dia in 4 to 10mtrs. Length +/-2% , Withstand temp -40C to +130C.Colour:Black


Application:Excellent choice for a wide range of applications, including exhaust, Gases from Light/Heavy Vechicles, Ventilation fume removal and light duty material handling & suitable for usein many different industrial sectors.

DWC Pipes are made of High Density Poly Ethylene Polymers. The DWC pipes shall consist of two layers, the outerand the inner layer shall be plain & smooth.

DWC pipes are available in sizes 50 mm to 200 mm.

For use in nourishing products, the suction and discharge of beer, wine, milk, beverages, ice-cream, chocolates, peppermint, cereals etc. Its total transparency allows one better visualization of the ticket of the products and, its total smooth internal face, does not allow to the setting of residues, preventing contaminations.