Our company is counted amidst the primary Suppliers ofEVA Injection Moulding Machine. The EVA Injection Moulding Machine offered by us is procured from highly reliable manufacturers who design and manufacture it using finest quality material and latest technology. The EVA Injection Moulding Machine is acclaimed by the clients owing to its smooth performance, hassle free operations, efficiency and less maintenance requirements.

Components :

• The mold-holders

  • To meet various productions, the mold carrier is designed to utilize different types of molds such as one mold 1 pair, one mold 2 pairs, one mold 3 pairs in small sizes, and stacked molds

  • The high closing force of mold-holder is realized with hydraulic cylinders that, automatically, compensate height of mold. The closing of the molds is assured in every thermal condition

  • The clamping system of the mold-holder is realized with twin cylinders in each station. The big hydraulic cylinders averagely distribute the high clamping force on the whole surface of the molds to avoid flesh at parting line of molds

  • The mold holder is with large open stroke; it makes easier to collect products and clean mold cavities

  • There are independent temperature control units for up & down mold plates in each mold-holder. The temperature of each mold is controlled with high precision, increasing in this way, the quality of the injected product

• The injection groups

  • The injection system is optimized by a unique screw design with precise temperature control

  • The repeatability is assured by a sophisticated volumetric control and by the proportional valves of pressure and speed

  • Injection volume is sufficient to meet the production with multi-cavity molds and stacked molds

  • There are multi zones of thermal controllers on each injector. Each zone is set for heating and cooling individually in coordination with different characteristics of material compound and production condition

  • Precise transmission system with the accurate sliding structure driven by servomotor control systems, the movement of the injection units is smooth, and positioning is fast and precise

• The electronic control unit

  • During operation, the supervisory control works continuously and assures the proper functioning of diagnostic and maintenance

  • Equipped with industrial-level computer to provide long serving life and stable operation. The window-based operating system is easy to learn and parameter setting is simple. It is available to switch between different languages

• Optional unit

  • Aim at the need of customers, we develop the latest stack mold structure with unique synchronizing opening device. With this special design, the ultimate performance of 4 pairs per mold can be achieved

  • The innovative color Master-Batch provides efficient injection manufacture to meet the trend of various orders and demand of large no. colors and small no. pairs. It reduces the storage of colored material and simplifies the preparation of material. Regular EVA compound and color master-batch EVA compound are compatible on the CMB injection system. Production is more flexible.

ThePlastic Injection Molding Machinesupplied by has been widely appreciated by the customers for its superior quality and durability. The Injection molding is a manufacturing process for producing parts from both thermoplastic and thermosetting plastic materials. Material is fed into a heated barrel, mixed, and forced into a mold cavity where it cools and hardens to the configuration of the mold cavity. After a product is designed, usually by an industrial designer or an engineer, molds are made by a mold maker (or toolmaker) from metal, usually either steel or aluminum, and precision-machined to form the features of the desired part. Injection molding is widely used for manufacturing a variety of parts, from the smallest component to entire body panels of cars.

Propelled by : Hydraulic

Capacity : 50 ton to 2000 ton capacity & 100 gram to 5 kgs

Applications :

• PVC industry
• Plastic industry
• Rubber and thermoplastic industry
• Footwear industry

We offer customers Rubber Injection Moulding Presses that feature advanced injection units, allowing excellent product quality. These machines also employ two-stage material supply that ensures greater precision in involved operations. These Rubber Injection Moulding presses are suitable for :Moulding products having simple and complex geometriesIdeal for the production of natural & synthetic rubber, oil & heat resistant rubber, and reclaimed rubber.For making various rubber partsUsed in Hot runner systemUsed in Cold runner system

Our company is counted amidst the primary Suppliers ofEVA Injection Moulding Machine. The EVA Injection Moulding Machine offered by us is procured from highly reliable manufacturers who design and manufacture it using finest quality material and latest technology. The EVA Injection Moulding Machine is acclaimed by the clients owing to its smooth performance, hassle free operations, efficiency and less maintenance requirements.

Components :

• The mold-holders

  • To meet various productions, the mold carrier is designed to utilize different types of molds such as one mold 1 pair, one mold 2 pairs, one mold 3 pairs in small sizes, and stacked molds

  • The high closing force of mold-holder is realized with hydraulic cylinders that, automatically, compensate height of mold. The closing of the molds is assured in every thermal condition

  • The clamping system of the mold-holder is realized with twin cylinders in each station. The big hydraulic cylinders averagely distribute the high clamping force on the whole surface of the molds to avoid flesh at parting line of molds

  • The mold holder is with large open stroke; it makes easier to collect products and clean mold cavities

  • There are independent temperature control units for up & down mold plates in each mold-holder. The temperature of each mold is controlled with high precision, increasing in this way, the quality of the injected product

• The injection groups

  • The injection system is optimized by a unique screw design with precise temperature control

  • The repeatability is assured by a sophisticated volumetric control and by the proportional valves of pressure and speed

  • Injection volume is sufficient to meet the production with multi-cavity molds and stacked molds

  • There are multi zones of thermal controllers on each injector. Each zone is set for heating and cooling individually in coordination with different characteristics of material compound and production condition

  • Precise transmission system with the accurate sliding structure driven by servomotor control systems, the movement of the injection units is smooth, and positioning is fast and precise

• The electronic control unit

  • During operation, the supervisory control works continuously and assures the proper functioning of diagnostic and maintenance

  • Equipped with industrial-level computer to provide long serving life and stable operation. The window-based operating system is easy to learn and parameter setting is simple. It is available to switch between different languages

• Optional unit

  • Aim at the need of customers, we develop the latest stack mold structure with unique synchronizing opening device. With this special design, the ultimate performance of 4 pairs per mold can be achieved

  • The innovative color Master-Batch provides efficient injection manufacture to meet the trend of various orders and demand of large no. colors and small no. pairs. It reduces the storage of colored material and simplifies the preparation of material. Regular EVA compound and color master-batch EVA compound are compatible on the CMB injection system. Production is more flexible.

ThePlastic Injection Molding Machinesupplied by has been widely appreciated by the customers for its superior quality and durability. The Injection molding is a manufacturing process for producing parts from both thermoplastic and thermosetting plastic materials. Material is fed into a heated barrel, mixed, and forced into a mold cavity where it cools and hardens to the configuration of the mold cavity. After a product is designed, usually by an industrial designer or an engineer, molds are made by a mold maker (or toolmaker) from metal, usually either steel or aluminum, and precision-machined to form the features of the desired part. Injection molding is widely used for manufacturing a variety of parts, from the smallest component to entire body panels of cars.

Propelled by : Hydraulic

Capacity : 50 ton to 2000 ton capacity & 100 gram to 5 kgs

Applications :

• PVC industry
• Plastic industry
• Rubber and thermoplastic industry
• Footwear industry

We offer customers Rubber Injection Moulding Presses that feature advanced injection units, allowing excellent product quality. These machines also employ two-stage material supply that ensures greater precision in involved operations. These Rubber Injection Moulding presses are suitable for :Moulding products having simple and complex geometriesIdeal for the production of natural & synthetic rubber, oil & heat resistant rubber, and reclaimed rubber.For making various rubber partsUsed in Hot runner systemUsed in Cold runner system