LPG valves 4624053, Screw On Type Handwheel Operated OR Two Pin Type OR As per BSEN:13153. without safety OR Test pressure 17.5 bar or as per customers requirement OR INLETS: as per customers requirement, LPG Cylinder Valve (Manually operated)

The residential / commercial gas meters are designed according to European Norm EN 1359 to measure the consumption of gas in households and of consumer, where the maximum consumption of all gas appliance does not exceed 2.5 m3/h in case of Gas Meter UG G1.6, 4m3/h in case of Gas Meter UG G2.5 and 6m3/h in case of Gas Meter Ug G4, of the air density 1.2 kg/m3. They are suitable to measure the consumption of Natural Gas, Synthetic Gases and their mixtures. They can be equipped with low frequency pulse transmitter Type N1.3

Delux Gas (Propane or Butane) Torches in compliance with regulations ISO EN 9012

Instructions for correct useUse exclusively in open airPlease make sure that flexible hose has been correctly connected rigourously in order before to the welding torch and then to gas cylinder

Ignition1. Close both small tap and black knob clockwise?2. Open the main tap of the gas cylinder?3. Regulate Gas Pressure through the valve placed on the gas regulator (if provided)?4. Push button located on security valve (if supplied) until the hose is totally fulfilled with gas?5. Slightly open the black torch knob?6. Ignite the torch. Regulate the brass knob to obtain desired pilot flame.7. Pull the lever to get maximum output (the black knob controls the lever gas flow)?8. In case of wind or inclement weather conditions, increase the pilot flame by turning anticlockwise the small brass knob

Turn Off1. Close the main tap on the gas cylinder2.Consume all the residual gas in the rubber hose3. Close the torch taps and knobs

Safety Devices:1. An excess flow security valve is placed on the regulator for immediate stop of gas flow in case of rubber hose damage or sudden pressure change due to external causes?2. A torch stand is provided as standard equipment in order to lay the torchwhen in use. This allows the torch to rest in a upright position onto the floor.

Complete Torch Kits

A professional and powerful torch kit, ideal for soft soldering, brazing, melting, metal works, paint stripping and other heating jobs includes handle 3486, neck tube 351101 burner 294102 and 2 m fixed hose

Propane HosesDiameter 5 mm and 8 mm EN 559 / ISO 3821Fixed connection type BSP 3/8 LH connection

Model:Promatic System R Sievert Pro 86 Torch Kit

Part Number:219742

Specifications

DetailsHandle Art No., 348841Working Pressure, bar, 1.5-8Weight, g, 385Length, mm, 205Height, mm, 90Hose Connections BSP, 3/8 LH

System RBurner art no., 294302, 4402, 296001Burner diameter , mm, 35, 0, 60Gas Consumption, g/h at 4 bar, 3350, 700, 8250Effect, kW, 43.5, 6, 114

System RNeck tube No., Length, mm350701, 500351001, 350350902 with hook, 180

DetailsPin-point Burner No., 870201, 870401Burner Diameter , mm, 15, 16Gas Consumption, g/h at 2bar, 40, 90Effect, kW at 2bar, 0.5, 1.2Soldering max pipe , mm, 10, 18

for apllications like corrosive environment, corrosive gases, chemicals, steam, water, liquids.

Manufactured as per customers order. 2/3/4/6/8 pots with or
without tray slide in SS body.

Model:none

Part Number:1379 to 1381

2 / 3 burner commercial cooking platform for low budget kitchens.
Size : 16x42, 18 x 42, 16 x 68, 18 x 68

Available in various sizes made as per order
Stock pot cooking platform size 2 x 2 in mild steel and stainless steel
made as per order and specifications.

LPG / NG fired Kabab Tandoor manufactured as per
customers order in SS body.

The FMG series of rotary gas meters is designed to meet the highest demands of reliable and accurate measurement of gas flow. The meters fully comply with the EN12480 and OIML R137. A compact exchangeable aluminum cartridge allows local repair and on-site cleaning. Installation stresses caused by connecting piping are minimal due to the robust design and construction of the casing and cartridge. The aluminum casing (body and cover) is designed for working pressures up to 21 bar (300 psi) with a safety factor of 5. Square impellers and improved positioning of main bearings and shafts makes the meter less susceptible to overload and pressure shocks.
An aluminum index and protection of the LF pulsers with the associated magnets helps prevent manipulation of the meter by externally applied magnets or other external forces. Tampering of meters with strong neodymium magnets is a major concern of utility companies in many parts of the world.
This type of manipulation is very difficult to detect and or prove, therefore, prevention of such actions is the best cure. Further, in order to be prepared for the smart grid, the index can be equipped with an intelligent encoder. A unique proprietary oiling system, where-by the oil is distributed directly to the timing gears by means of a disc, eliminates oil loss at high impeller speed and will lubricate the timing gears at very low loads. All plugs and oil sight glasses are in the front of the meter, allowing the meter to be installed in very compact installations.

COMMERCIAL GAS FLOW METERS:

We distribute G2.5, G4, G6, G10, G16, G25 meters G1.6, 2.5, 4 are conforming to BS/EN 1359. 0.5 Bar or 1.5 bar

These meter sizes are available in various brands.

Model:G 2.5, G 4, G 6

VANAZ F 0109 / 0109 II
Working Pressure 20 kg/cm2
Gas Flow Capacity 200 Nm3/hr.
End Connection 1 ANSI 150
Gas LPG, Natural Gas, Nitrogen and Air

Gas cylinder valves the design requirements of international specifications EN13153, EN13152 & EN12864 etc.The new design incorporates two lock pins Safety setting is conducted on 100% production and is in accordance with CGABSEN norms. Carry standard markings. Special markings with bulk orders can be arranged.

LPG valves 4624053, Screw On Type Handwheel Operated OR Two Pin Type OR As per BSEN:13153. without safety OR Test pressure 17.5 bar or as per customers requirement OR INLETS: as per customers requirement, LPG Cylinder Valve (Manually operated)

The residential / commercial gas meters are designed according to European Norm EN 1359 to measure the consumption of gas in households and of consumer, where the maximum consumption of all gas appliance does not exceed 2.5 m3/h in case of Gas Meter UG G1.6, 4m3/h in case of Gas Meter UG G2.5 and 6m3/h in case of Gas Meter Ug G4, of the air density 1.2 kg/m3. They are suitable to measure the consumption of Natural Gas, Synthetic Gases and their mixtures. They can be equipped with low frequency pulse transmitter Type N1.3

Delux Gas (Propane or Butane) Torches in compliance with regulations ISO EN 9012

Instructions for correct useUse exclusively in open airPlease make sure that flexible hose has been correctly connected rigourously in order before to the welding torch and then to gas cylinder

Ignition1. Close both small tap and black knob clockwise?2. Open the main tap of the gas cylinder?3. Regulate Gas Pressure through the valve placed on the gas regulator (if provided)?4. Push button located on security valve (if supplied) until the hose is totally fulfilled with gas?5. Slightly open the black torch knob?6. Ignite the torch. Regulate the brass knob to obtain desired pilot flame.7. Pull the lever to get maximum output (the black knob controls the lever gas flow)?8. In case of wind or inclement weather conditions, increase the pilot flame by turning anticlockwise the small brass knob

Turn Off1. Close the main tap on the gas cylinder2.Consume all the residual gas in the rubber hose3. Close the torch taps and knobs

Safety Devices:1. An excess flow security valve is placed on the regulator for immediate stop of gas flow in case of rubber hose damage or sudden pressure change due to external causes?2. A torch stand is provided as standard equipment in order to lay the torchwhen in use. This allows the torch to rest in a upright position onto the floor.

Complete Torch Kits

A professional and powerful torch kit, ideal for soft soldering, brazing, melting, metal works, paint stripping and other heating jobs includes handle 3486, neck tube 351101 burner 294102 and 2 m fixed hose

Propane HosesDiameter 5 mm and 8 mm EN 559 / ISO 3821Fixed connection type BSP 3/8 LH connection

Model:Promatic System R Sievert Pro 86 Torch Kit

Part Number:219742

Specifications

DetailsHandle Art No., 348841Working Pressure, bar, 1.5-8Weight, g, 385Length, mm, 205Height, mm, 90Hose Connections BSP, 3/8 LH

System RBurner art no., 294302, 4402, 296001Burner diameter , mm, 35, 0, 60Gas Consumption, g/h at 4 bar, 3350, 700, 8250Effect, kW, 43.5, 6, 114

System RNeck tube No., Length, mm350701, 500351001, 350350902 with hook, 180

DetailsPin-point Burner No., 870201, 870401Burner Diameter , mm, 15, 16Gas Consumption, g/h at 2bar, 40, 90Effect, kW at 2bar, 0.5, 1.2Soldering max pipe , mm, 10, 18

for apllications like corrosive environment, corrosive gases, chemicals, steam, water, liquids.

Manufactured as per customers order. 2/3/4/6/8 pots with or
without tray slide in SS body.

Model:none

Part Number:1379 to 1381

2 / 3 burner commercial cooking platform for low budget kitchens.
Size : 16x42, 18 x 42, 16 x 68, 18 x 68

Available in various sizes made as per order
Stock pot cooking platform size 2 x 2 in mild steel and stainless steel
made as per order and specifications.

LPG / NG fired Kabab Tandoor manufactured as per
customers order in SS body.

The FMG series of rotary gas meters is designed to meet the highest demands of reliable and accurate measurement of gas flow. The meters fully comply with the EN12480 and OIML R137. A compact exchangeable aluminum cartridge allows local repair and on-site cleaning. Installation stresses caused by connecting piping are minimal due to the robust design and construction of the casing and cartridge. The aluminum casing (body and cover) is designed for working pressures up to 21 bar (300 psi) with a safety factor of 5. Square impellers and improved positioning of main bearings and shafts makes the meter less susceptible to overload and pressure shocks.
An aluminum index and protection of the LF pulsers with the associated magnets helps prevent manipulation of the meter by externally applied magnets or other external forces. Tampering of meters with strong neodymium magnets is a major concern of utility companies in many parts of the world.
This type of manipulation is very difficult to detect and or prove, therefore, prevention of such actions is the best cure. Further, in order to be prepared for the smart grid, the index can be equipped with an intelligent encoder. A unique proprietary oiling system, where-by the oil is distributed directly to the timing gears by means of a disc, eliminates oil loss at high impeller speed and will lubricate the timing gears at very low loads. All plugs and oil sight glasses are in the front of the meter, allowing the meter to be installed in very compact installations.

COMMERCIAL GAS FLOW METERS:

We distribute G2.5, G4, G6, G10, G16, G25 meters G1.6, 2.5, 4 are conforming to BS/EN 1359. 0.5 Bar or 1.5 bar

These meter sizes are available in various brands.

Model:G 2.5, G 4, G 6

VANAZ F 0109 / 0109 II
Working Pressure 20 kg/cm2
Gas Flow Capacity 200 Nm3/hr.
End Connection 1 ANSI 150
Gas LPG, Natural Gas, Nitrogen and Air

Gas cylinder valves the design requirements of international specifications EN13153, EN13152 & EN12864 etc.The new design incorporates two lock pins Safety setting is conducted on 100% production and is in accordance with CGABSEN norms. Carry standard markings. Special markings with bulk orders can be arranged.