Our Products
Pharmaceutical Machines & Equipment
2 Products availableDisposable Plate Making Machine
2 Products availableIndustrial Pump
2 Products availableIndustrial & Engineering Products
2 Products availableIndustrial Valves
2 Products availableDetails:
The application of Clay Mixing Machine or Blunger Machine is to mix dry dirty clay with water and stir it well till the clay dissolve completely in the water.
After that the liquid shall be taken out from the Blunger Machine through the valve and then filter it by mesh screen and pour into the grounded pocketsto make it dry under sunlight.
After drying, it will be cut into medium block shape and send it for cutting machine.
Details:
In this modern era, we are expecting more and more production from the machine with high power output. So, that we can get high production with high quality product.
Hydraulic Machine simplify your effort here. In hydraulic machine you can get more (three times) production when compared to manual machine. Also, it compete in the price as well.
All kinds of clay utensil products can be made from hydraulic machine. For different shape and size the capacity of hydraulic machine shall be different.
This machine “Semi-Automatic Double Die Paper Plate Making Machine” is a Hydraulic Powered Machine, works on the principle of Fluid (Oil) Pressure. Thus, we get tremendous force from this machine when compared with basic mechanical machine.
This hydraulic machine is second generation machine , & from this machine we can manufacture complete range of paper Dona, Plate & Thali.
Hydraulic machine is somewhat costlier & mostly required by those Business’s who’s priority is quality & performance of machine & its manufacturing products.
By this machine we can manufacture a complete range of Paper Dona, Plates & Thali of all Sizes.
This hydraulic machine can be customize as per customer’s requirement of operations and safety concerns.
For more information about customisation of machine, you may kindly contact us
A hydraulic cylinder is a mechanically designed device that is used to give a unidirectional force through a unidirectional stroke. This device is widely used in manufacturing machinery, constructional equipment, engineering vehicles etc. It uses the power from the pressurized hydraulic fluid. This device consists of a cylinder barrel in which a piston is connected to a piston rod. Our Hydraulic Cylinders are used in different industrieslike- Rolling Mill Industries, Paper Mill Industries, Die Casting Units, Furnace Industries, and Steel Industries etc.
Features :
A hydraulic jack is a device that allows heavy loads by using force. The primary mechanism depends on the type of jack. These Hydraulic jacks can lift the heavy loads. Designs from our Industrial Hydraulic jacks are used in construction sites, cement plants, different mills, railways sites and many other industries.
Features :
Now a days the demand of clay kulhad is gradually increasing in Indian market due to its environmental friendly and cost effectiveness.
The manufacturing of kulhad, Diya & other utensils require high quality clay, & to transform into required shape we require desired moulds.
The selection of machines depends on the shape and size of clay products, in which we can manufacture the clay products of your desire shapes and sizes.
Manual Toggle Press Machine are basic machine for manufacturing of Diya & Kulhad.
Clay product manufacturing from Manual Toggle Press Machine having limitations for clay product size, you can check the size limitation by contacting us. It has less service and maintenance work & comparatively high productivity when compared from traditional pottery work for clay products. Also, the production of designer diya and kulhad is advantageous over traditional pottery work.
Hydraulic power packs are required in railway, construction, petroleum, shipbuilding, and many others. With maximum working speed and pressure, these power packs are quite appropriate for hydraulic work in gas wells and servicing oil units. Its performance is checked through different parameters before the final transmission. By searching on the our website, you will find different types of hydraulic power packs.
Features :
Being a leading manufacturer & supplier, we are engaged in offering an excellent range of premium quality “Automatic Camphor Tablet Making Machine” to the MSME Industry.
Our machines are of simple and sturdy design, easy to operate, more production at less cost and maintenance. This high quality machine runs at very high speed at the rate of 100-150 Strokes per minute, by consuming very less electricity power.
Due to the high demand of Camphor Tablets at every city, & rural areas this is very profitable business at all time.
All kinds of Camphor Tablets, & Naphthalene Balls of required shape & size can be manufacture by this machine. Also, the slab of size 1”x1” can be made from this machine by some adjustments.
For bigger size of slabs, the hydraulic powered machine will be preferred. The hydraulic powered Camphor Slab making machine will be designed according to the size or weight of slab required by the customer.
Also, Camphor Tablets & Naphthalene Balls can be made by Hydraulic Powered Slab Making Machine.
For any further information about the machine, you may please contact us
A hydraulic press is a device using a hydraulic cylinder and hydraulic power pack to generate a compressive force for pressing something. Hydraulic presses are commonly used for forging, clinching, moulding, blanking, punching, deep drawing, and metal formingoperations
Features :
According to the structural form, the hydraulic press machine is mainly divided into :
Our Range in Hydraulic Press
This is a “Semi-Automatic Slipper Making Machinery”, which is an entry level basic hydraulic powered machine having cutting force capacity of 5 Ton.
This machine is operated mechanically by hand lever.
Small & light weighted structural body of machine with basic & entry level hydraulic power system makes it very cheaper & hence it becomesto the range of those customers who have very limited investment.
Due to its small & light structural body weight, the transportation & handling of the machine is quite easy. Customer can take this machine with their own.
The application of Clay Cutting Machine is to cut the big solid clay into fine powder form, so that it can easily convert their shape into mold shape.
In this mordern era, we are expecting more and more production from the machine with high power output. So, that we can get high production with high quality product.
Hydraulic Machine simplify your effort here. In hydraulic machine you can get upto 3+3 time more production when compared to manual machine. Also, it compete in the price as well.
All kinds of clay utensile products can be made from hydraulic machine.
For different shape and size the capacity of hydraulic machine shall be different.
Due to less service and maintenance work & comparatively high productivity, the hydraulic powered machine is avery popular in Clay Utensils Manufacturing Industry. All kinds of Utensils can be made by this machine with equivalent capacity selection of machine
This “Semi-Automatic Camphor Slab Making Machine” is heavy duty Hydraulic Powered Machine.
We make this machines simple and sturdy, which makes it easy to operate, do more production at electricity less cost and with least maintenance cost.
This high quality machine has a capacity to make 50 gm to 250 gm slabs, with optimum speed of 10-12 Punch per minute.
Due to the high demand of Camphor Slabs at every city, & rural areas this is very profitable business at all time.
All kinds of Camphor Tablets, Naphthalene Balls, & Slab from 50 gm to 250 gm can be manufacture by this machine.
As the required shape & size of Camphor Slab can be different for different customers, we can design & develop the machine as per their requirement.
This machine can be available in Fully-Automatic Model as per customer’s demand.
For any further information about the machine, you may please contact us.
This is a “Semi-Automatic Slipper Making Machinery”, which is an mini mechanical powered machine having cutting force capacity of 5 Ton.
This machine is operated mechanically by electrical lever switch.
Small & light weighted structural body of machine with basic & entry level mechanical system makes it very cheaper & hence it becomesto the range of those customers who have very limited investment.
Due to its small & light structural body weight, the transportation & handling of the machine is quite easy. Customer can take this machine with their own.