Magtorq Planetary Helical geared motor is a combination of multi stage planetary and single stage helical gear train, all housed in a common enclosure. Our gear boxes are designed to operate continuously 24 hours per day for many seasons with sufficient capacity to start on high load conditions.

The use of rolling bearings ensures that the gears are well centered, provide high efficiency and positional consistency resulting in extended service life.

Experience of our customers enjoying years of trouble-free operation after guarantee period is the proof of the same.

ADVANTAGES

.Hollow shaft with gib head taper key allows it to be slipped onto the machine shaft and fixed in place. Arrest the reaction force on the housing with the torque arrester and the machine is ready for operation. This makes the installation easy and economical.

.Gears and bearings are lubricated by the oil filled in the gearbox. Occasional oil change and topping up is the only maintenance required, hence overall maintenance is less.

.Loss through spillage is eliminated which keeps the surroundings clean.

.Overall efficiency of transmission increased almost three times compared to the conventional worm drive system, thus reducing the installed motor rating and power consumed.

.Handle is provided to rotate the rear end shaft of the motor manually. Improved efficiency of the transmission has reduced the manual effort to a minimum.

APPLICATION

.Crystallizers.

.Clarifiers.

.Low speed conveyors.

.Low speed and high torque applications.

PRODUCT RANGE

Magtorq has now added a new product range with Electro-Mechanical Outrigger Jacks and Actuators in addition to their range of planetary gearboxes and special gear transmissions. Wide range of this product to cover load, stroke length and environmental conditions was necessitated by the demand for motorized, reliable mechanical actuators and jacks out-rigged on military equipments. We are happy to say that hundreds of these units are now in operation successfully and the consolidated details of these supplies form the core of this catalogue which we hope will enable you to select a unit to meet your requirements. Electro-Mechanical Actuators are made on the same principles as Outrigger jacks, they are provided with yokes at one or both ends as required. They are sized similar to the outrigger Jacks and the basic selection can be made from the details provided below. As always, Magtorq is ever ready to work on your enquiries to meet special requirements that are not covered by the features provided in this product range.

STANDARD FEATURES:

• .Fine finished and matched Nut and Screw for smooth operation.
• .Long life lubricant to provide superior service at high working loads.
• .Manual operation with minimum effort.
• .Self locking Screw-Nut combination.
• .Customized stroke lengths.
• .Foot with spherical joint to handle ground inclination.
• .Provision to mount encoder and end limit switches.
• .Torque limiter between motor and gear train.
• .Shock absorbers at the ends of stroke.
• .Fully sealed with Elastomeric seals.
• .Suitable for operation between -30 and +55 Degrees Centigrade.

PRODUCT RANGE

SALIENT FEATURES

Magtorq Planetary Helical geared motor is a combination of multi stage planetary and single stage helical gear train, all housed in a common enclosure. Our gear boxes are designed to operate continuously 24 hours per day for many seasons with sufficient capacity to start on high load conditions.

The use of rolling bearings ensures that the gears are well centered, provide high efficiency and positional consistency resulting in extended service life.

Experience of our customers enjoying years of trouble-free operation after guarantee period is the proof of the same.

ADVANTAGES

.Hollow shaft with gib head taper key allows it to be slipped onto the machine shaft and fixed in place. Arrest the reaction force on the housing with the torque arrester and the machine is ready for operation. This makes the installation easy and economical.

.Gears and bearings are lubricated by the oil filled in the gearbox. Occasional oil change and topping up is the only maintenance required, hence overall maintenance is less.

.Loss through spillage is eliminated which keeps the surroundings clean.

.Overall efficiency of transmission increased almost three times compared to the conventional worm drive system, thus reducing the installed motor rating and power consumed.

.Handle is provided to rotate the rear end shaft of the motor manually. Improved efficiency of the transmission has reduced the manual effort to a minimum.

APPLICATION

.Crystallizers.

.Clarifiers.

.Low speed conveyors.

.Low speed and high torque applications.

PRODUCT RANGE

Magtorq has now added a new product range with Electro-Mechanical Outrigger Jacks and Actuators in addition to their range of planetary gearboxes and special gear transmissions. Wide range of this product to cover load, stroke length and environmental conditions was necessitated by the demand for motorized, reliable mechanical actuators and jacks out-rigged on military equipments. We are happy to say that hundreds of these units are now in operation successfully and the consolidated details of these supplies form the core of this catalogue which we hope will enable you to select a unit to meet your requirements. Electro-Mechanical Actuators are made on the same principles as Outrigger jacks, they are provided with yokes at one or both ends as required. They are sized similar to the outrigger Jacks and the basic selection can be made from the details provided below. As always, Magtorq is ever ready to work on your enquiries to meet special requirements that are not covered by the features provided in this product range.

STANDARD FEATURES:

• .Fine finished and matched Nut and Screw for smooth operation.
• .Long life lubricant to provide superior service at high working loads.
• .Manual operation with minimum effort.
• .Self locking Screw-Nut combination.
• .Customized stroke lengths.
• .Foot with spherical joint to handle ground inclination.
• .Provision to mount encoder and end limit switches.
• .Torque limiter between motor and gear train.
• .Shock absorbers at the ends of stroke.
• .Fully sealed with Elastomeric seals.
• .Suitable for operation between -30 and +55 Degrees Centigrade.

PRODUCT RANGE

SALIENT FEATURES