Coolant filter paper These equipments are light weight, compact design and easily be installed. These Magnetic Coolant Filters are manufactured in 2 Models,

MAG TOOLS now has available small, cost effective Oil Skimmers for removing tramp oil from machine tool coolant tank. The MAG TOOLS wheel skimmer (WS) effectively removes floating tramp oil from water soluble coolants. In its magnetic version (MWS) it will even remove dispersed ferrous particles from the coolant. Tramp oil caused leaking hydraulic system & usage of way oil is an even present problem in the management of water soluble coolants. Tramp oil reduces the coolants cooling and lubrication properties and supports bacterial growth which produces corrosive sulphuric acid. Tramp oil will shorten the coolant lifetime drastically, sings of affected coolant are: The bad smell, rust stained poor quality parts and premature tool wear. Renewal of labour, purchase and disposal fees and machine down time. The oil skimmer removes up to 12 lifer of tramp oil per hour. After half an hour the coolant surface has been cleaned almost completely. Even now the skimmer still removes tramp oil. The Advantages of the MAG TOOLS Wheel Skimmer

Low cost tramp oil removal for single machine application.

Improves coolant performance.

Improves coolant life.

Simple design, few moving parts, low wear, very little maintenance required.

Easy to install or retro-fit.

Removes ferrous fines (M option) from the coolant. HOW IT OPERATES A steel wheel driven by a small close coupled gearbox reducer (0.25KW) is partially submerged in the soluble coolant. As it rotates the steel wheel picks up tramp oil & many other kinds of floating debris from the coolant surface. The wheel turns past a scraper which removes the oil from the wheel and guides the tramp oil into an existing separate tramp oil bin. The tramp oil bin may be equipped with soluble recovery option. Range of our products

Magnetic Coolant Filters.

Paper Band Cum Magnetic Coolant Filters.

Hydro Cyclone Filters, vacuum Filters.

Cartridge Filters, Magnetic Inline Filters.

Centralized Coolant Filtration Systems.

Mechanical Chip Conveyors, Scraper Conveyors.

Screw Conveyors, Roller Conveyors.

Filter Paper Rolls.

Magnetic Chip Conveyors.

Oil skimmers.

The contaminated coolant from the machine is fed into the inlet of magnetic filter Magnetic coolant separator. As it passes through the gap between the drum and the body, the dust particles are arrested by the magnetic drum. A synthetic rubber roller mounted on springs, squeezes the dust and allows only dry power, which is further scraped out from the drum by scraper and is collected in the dust collecting tray. The filtration level achieved will be almost 95% for ferrous particles. These Magnetic Coolant Filters are manufactured in 2 Models, TAP & ATP

Fully automated our band filters are easy to operate and provides cost effective solution for filtration. These filters are specially designed for space efficiency and require only 20% of the space as compared to other conventional band filters. The hydrostatic head and the perfect sealing of the machine ensure that there is no leakage or overflow of the material and high filtration efficiency is achieved. Engineered to precision, these filters well suited for high flow rate and dirt content. Paper cartridge, washable cartridge, and stack type filter elements are available. System used to achieve final filtration level. Range: 30 lpm to 1000 lpm in one module. Suitable to max, working pressure 30 bar & pressure drop 0f 3 bar across filter. Clarity level : 75 microns to 3 microns.

Mag Tools Paper band filter unit is fabricated in steel. This entire unit is fixed on a coolant tank with a pump to supply coolant to the machine. The filtering paper is spread over an endless stainless steel mesh conveyor which is connected to a geared motor. this uniquely designed conveyor prevents overflowing of the liquid and the full width of the filtering paper is used. the movement of the filter paper is controlled by a float switch which actuates the geared motor.

We are a well established Chip Centrifuge Manufacturer and chip centrifuge exporter. At Mag Tools Hubli, we have chip centrifuge, Chip Centrifuge Filters etc., with us. The Chip Centrifuge offered by us is basically a device that is used for separating liquid, cutting oil etc., from a mixture of metal chips and larger pieces of metal. Hence, chip centrifuge manufactured by us is a very cost effective item. Chip Centrifuge becomes progressively more important in todays machine shops. Environmental laws limit the maximum residual coolant that can be retained in transported swarf and economically, reclaiming expensive coolant and the increased sales value of relatively dry chips are of vital importance. The Mag Tools offers small centrifuge units for single or small groups of machine with capacities upto 1000 liters per hour. ADVANTAGES OF MAG TOOLS CHIP CENTRIFUGE:

Adjustable speed to fit individual requirements.

Minimum number of parts, resulting in smooth running and low maintenance.

Heat treated, one piece long life bowl.

Superb de-oiling.

Small and compact in size.

Trouble free performance.

Maximum oil reclaiming from chips

Low price. HOW IT OPERATESSmall metal chips are continuously and regularly fed in to the centrifuge funnel by a feeding conveyor. The chips slide into the fast spinning wringer bawl and are accelerated upto the bowls RPM. High G-forces drive the chips up the bowls side wall and over the coolant exit slots toward the upper edge of the bowl. In this process the coolant is wrung off the chips and forced out via the coolant exit slots. The dried chips pass over the upper bowl edge and are guided via the wringer housing and discharge funnel into an extractor conveyor or swarf bin. DESIGNS Mag Tools Centrifuge Model MTC10, MTC-16 and MTC-20 are designed and constructed to offer high performance, maximum reliability and long lifetime with a minimum amount of maintenance. The bowl is manufactured from one price of specially heat treated alloy steel, using high precision machining techniques. The main shaft and bearing housing are machined to precise dimension and tolerances, the total assembly is mounted on vibration damping rubber pads. MAG TOOLS Manufactures the following machine tool, chip conveying and Filtration System

Magnetic Coolant Filters

Paper Band Cum Magnetic Coolant Filters

Hydro Cyclone Filters

Cartridge Filters

Vaccum Filters

Magnetic Chip Conveyor

Mechanical Chip Conveyor

Scraper Conveyor

Screw Conveyor

Roller Conveyor

Oil Skimmer(Disk & Belt Type)

Centralized Coolant Filtration Systems

Chip Centrifuge

Aluminum Chip Conveyor Cum Drum Filter

Chip Crusher

Presser Band Filters

Compact Band Filters

Oil Chilling Units

Filter Paper Rolls

We are take pride in introducing ourselves as one of the highly renowned Filter Paper Manufacturers and filter paper suppliers. We manufacture Filter Papers in accordance of highest technical specification. The variety of filter papers manufactured by us consists of Industrial Filter Paper etc. As the filter papers are manufactured using finest quality material, these are also offered at very reasonable prices by us.

Coolant filter paper These equipments are light weight, compact design and easily be installed. These Magnetic Coolant Filters are manufactured in 2 Models,

MAG TOOLS now has available small, cost effective Oil Skimmers for removing tramp oil from machine tool coolant tank. The MAG TOOLS wheel skimmer (WS) effectively removes floating tramp oil from water soluble coolants. In its magnetic version (MWS) it will even remove dispersed ferrous particles from the coolant. Tramp oil caused leaking hydraulic system & usage of way oil is an even present problem in the management of water soluble coolants. Tramp oil reduces the coolants cooling and lubrication properties and supports bacterial growth which produces corrosive sulphuric acid. Tramp oil will shorten the coolant lifetime drastically, sings of affected coolant are: The bad smell, rust stained poor quality parts and premature tool wear. Renewal of labour, purchase and disposal fees and machine down time. The oil skimmer removes up to 12 lifer of tramp oil per hour. After half an hour the coolant surface has been cleaned almost completely. Even now the skimmer still removes tramp oil. The Advantages of the MAG TOOLS Wheel Skimmer

Low cost tramp oil removal for single machine application.

Improves coolant performance.

Improves coolant life.

Simple design, few moving parts, low wear, very little maintenance required.

Easy to install or retro-fit.

Removes ferrous fines (M option) from the coolant. HOW IT OPERATES A steel wheel driven by a small close coupled gearbox reducer (0.25KW) is partially submerged in the soluble coolant. As it rotates the steel wheel picks up tramp oil & many other kinds of floating debris from the coolant surface. The wheel turns past a scraper which removes the oil from the wheel and guides the tramp oil into an existing separate tramp oil bin. The tramp oil bin may be equipped with soluble recovery option. Range of our products

Magnetic Coolant Filters.

Paper Band Cum Magnetic Coolant Filters.

Hydro Cyclone Filters, vacuum Filters.

Cartridge Filters, Magnetic Inline Filters.

Centralized Coolant Filtration Systems.

Mechanical Chip Conveyors, Scraper Conveyors.

Screw Conveyors, Roller Conveyors.

Filter Paper Rolls.

Magnetic Chip Conveyors.

Oil skimmers.

The contaminated coolant from the machine is fed into the inlet of magnetic filter Magnetic coolant separator. As it passes through the gap between the drum and the body, the dust particles are arrested by the magnetic drum. A synthetic rubber roller mounted on springs, squeezes the dust and allows only dry power, which is further scraped out from the drum by scraper and is collected in the dust collecting tray. The filtration level achieved will be almost 95% for ferrous particles. These Magnetic Coolant Filters are manufactured in 2 Models, TAP & ATP

Fully automated our band filters are easy to operate and provides cost effective solution for filtration. These filters are specially designed for space efficiency and require only 20% of the space as compared to other conventional band filters. The hydrostatic head and the perfect sealing of the machine ensure that there is no leakage or overflow of the material and high filtration efficiency is achieved. Engineered to precision, these filters well suited for high flow rate and dirt content. Paper cartridge, washable cartridge, and stack type filter elements are available. System used to achieve final filtration level. Range: 30 lpm to 1000 lpm in one module. Suitable to max, working pressure 30 bar & pressure drop 0f 3 bar across filter. Clarity level : 75 microns to 3 microns.

Mag Tools Paper band filter unit is fabricated in steel. This entire unit is fixed on a coolant tank with a pump to supply coolant to the machine. The filtering paper is spread over an endless stainless steel mesh conveyor which is connected to a geared motor. this uniquely designed conveyor prevents overflowing of the liquid and the full width of the filtering paper is used. the movement of the filter paper is controlled by a float switch which actuates the geared motor.

We are a well established Chip Centrifuge Manufacturer and chip centrifuge exporter. At Mag Tools Hubli, we have chip centrifuge, Chip Centrifuge Filters etc., with us. The Chip Centrifuge offered by us is basically a device that is used for separating liquid, cutting oil etc., from a mixture of metal chips and larger pieces of metal. Hence, chip centrifuge manufactured by us is a very cost effective item. Chip Centrifuge becomes progressively more important in todays machine shops. Environmental laws limit the maximum residual coolant that can be retained in transported swarf and economically, reclaiming expensive coolant and the increased sales value of relatively dry chips are of vital importance. The Mag Tools offers small centrifuge units for single or small groups of machine with capacities upto 1000 liters per hour. ADVANTAGES OF MAG TOOLS CHIP CENTRIFUGE:

Adjustable speed to fit individual requirements.

Minimum number of parts, resulting in smooth running and low maintenance.

Heat treated, one piece long life bowl.

Superb de-oiling.

Small and compact in size.

Trouble free performance.

Maximum oil reclaiming from chips

Low price. HOW IT OPERATESSmall metal chips are continuously and regularly fed in to the centrifuge funnel by a feeding conveyor. The chips slide into the fast spinning wringer bawl and are accelerated upto the bowls RPM. High G-forces drive the chips up the bowls side wall and over the coolant exit slots toward the upper edge of the bowl. In this process the coolant is wrung off the chips and forced out via the coolant exit slots. The dried chips pass over the upper bowl edge and are guided via the wringer housing and discharge funnel into an extractor conveyor or swarf bin. DESIGNS Mag Tools Centrifuge Model MTC10, MTC-16 and MTC-20 are designed and constructed to offer high performance, maximum reliability and long lifetime with a minimum amount of maintenance. The bowl is manufactured from one price of specially heat treated alloy steel, using high precision machining techniques. The main shaft and bearing housing are machined to precise dimension and tolerances, the total assembly is mounted on vibration damping rubber pads. MAG TOOLS Manufactures the following machine tool, chip conveying and Filtration System

Magnetic Coolant Filters

Paper Band Cum Magnetic Coolant Filters

Hydro Cyclone Filters

Cartridge Filters

Vaccum Filters

Magnetic Chip Conveyor

Mechanical Chip Conveyor

Scraper Conveyor

Screw Conveyor

Roller Conveyor

Oil Skimmer(Disk & Belt Type)

Centralized Coolant Filtration Systems

Chip Centrifuge

Aluminum Chip Conveyor Cum Drum Filter

Chip Crusher

Presser Band Filters

Compact Band Filters

Oil Chilling Units

Filter Paper Rolls

We are take pride in introducing ourselves as one of the highly renowned Filter Paper Manufacturers and filter paper suppliers. We manufacture Filter Papers in accordance of highest technical specification. The variety of filter papers manufactured by us consists of Industrial Filter Paper etc. As the filter papers are manufactured using finest quality material, these are also offered at very reasonable prices by us.