Magpower Linksys

Navghar, Mumbai, Maharashtra

Item Code : Bearing-Mounted-Clutch-Type-BMC The Bearing Mounted Clutch Type BMC is a Normally Off type Clutch. It has 2 basic parts, the bearing mounted stator consisting of a coil and a rotor faced with friction material held to the stator by means of the bearing, and the Armature plate. When current flows through the Clutch Coil, the Armature plate is attracted to the rotor with friction material thereby transmitting the torque and is released immediately due to a sinusoidal wave spring when no current is passing through the coil. These Clutches are used for Dry Applications only. Features

• The Bearing Mounted Clutches are specially designed for Shaft Mounting and Centering is automatic.
• The Clutches are designed for simple mounting and easily adaptable to any mounting requirement as they are manufactured in varied designs.
• The sinusoidal wave spring enables a backlash free transmission, enabling very short response time on disengagement, the friction faces are completely separated by the Spring eliminating any drag and permitting use at very high idling speeds.
• These units are partically maintenance free due to the Stationary Coil and Highly Wear Resistant friction surfaces.

Ordering Information

• Type, Size, D.C. Voltage, Design, Rotor Bore Diameter, Armature Bore Diameter.
• Armature Bore Diameter is not applicable for Design 100 and Design 103.

Example of Order

• Type : BMC, Size : 08, 24 VDC, Design 101, Rotor Bore 11 mm.
• Armature Bore 14 mm.

Selection of Clutch SizeFor selecting the correct size of the clutch, the factors to be considered are

• Max. reqd. Static torque.
• Freq. Of operations.
• Max. thermal load.

The reqd. Static torque can be calculated using the formula

• M = (9550 p/n). s (Nm)
• M = Reqd. Static torque (Nm)
• p = Power rating of prime mover in KW
• n = Rev / Min
• s = Service factor depending on application (1.5 to 4.0)

For switching details and complicated calculations, please get in touch with us. Magpower Electromagnetic Single face Bearing Mounting Clutch Type BMC require D.C. Supply. Product Line

• Spring Applied Fail Safe Brake Type FSB
• Electromagnetic Single Face Brakes (Normally Off) Type EB
• Electromagnetic Single Face Clutch Type EC
• Clutch Brake Combination Open Type CBO
• Clutch Brake Combination Encased Type CBE
• Single Shaft Double Clutch Unit Type SSDC
• Single Shaft Clutch Brake Unit Type SSCB
• Hollow Shaft Clutch Brake Unit Type HSCBE
• A.C. Fail Safe Brake Type AFS

Click Here to View Dimensions

We are reckoned as one of the well-reputed Brass Scrap Manufacturers and Suppliers in India. The Brass Scrap Metal offered by us is widely demanded in the national as well as international clients due to the unmatched quality and unsurpassable performance in respective applications. The Brass Honey Yellow Scrap is available in varied grades and dimensions as per the specifications provided. Additionally, customers are eased with the availability of the Industrial Brass Scrap that complies with the internationally accepted quality norms.

Item Code : Spring Applied Fail Safe Brake Type FSB Magpower Linksys are manufacturers of Clutches and Brakes which are intended for Start-Stop applications. They come in various types to meet different requirements. Type FSBMagpower Spring Applied Brakes Type FSB are typical fail safe brakes. Its braking torque is produced by spring pressure and the brake is released electromagnetically. When there is no current flowing through the brake coil, the fail safe operation of the brake is derived from the braking torque generated by the spring pressure. When current flows through the brake coil, the spring pressure is neutralised by the developed electromagnetic force, which enables the brake to be released. They are suitable for dry applications only.These brakes are thus safety brakes coming into, action in the event of a power failure, arresting motion instantaneously. Features

• Magpower Spring Applied Fail Safe Brakes incorporate a telescopic tubular wear adjustment system which facilitates easy maintenance. Alternatively, these brakes can also be provided with spacers, wherein the airgap is preset and can be initially mounted without any adjustment.
• Individual Spring pressure adjustment permits precise setting of braking moment.
• A low level of wear owing to the use of an abrasion resistant friction material and a large friction area.
• Manual release is provided as an additional features which enables the brake to be released mechanically, in case of power failure.
• The brake have short switching time and operate in milliseconds.
• Seals are provided to prevent the ingress of foreign matter, thus ensuring a long life and smooth functioning of the brake.
• Ordering Information
  • Type, Size, D.C. Voltage, Bore Diameter, Design.
  • Example of order
    • Type : FSB, Size : 08, 24 VDC, Bore Diameter 11mm, Design 104
    • For selecting the correct size of the brake, the factors to be considered are
      • Max. reqd. braking torque.
      • Freq. Of operations.
      • Max. thermal load.
      • The reqd. braking torque can be calculated using the formula
        • M = (9550 pn). s (Nm)
        • M = reqd. Static torque (Nm)
        • p = Power rating of prime mover in KW
        • n = Rev Min
        • s = Service factor depending on application (1.5 to 4.0)
        • For switching details and complicated calculations, please get in touch with us.
        • Magpower Spring Applied Fail Safe Brakes require D.C. Supply. Product Line
          • Electromagnetic Single Face Brakes (Normally Off) Type EB
          • Electromagnetic Single Face Clutch Type EC
          • Electromagnetic Single Face Bearing Mounted Clutch Type BMC
          • Clutch Brake Combination Encased Type CBE
          • Clutch Brake Combination Open Type CBO
          • Single Shaft Double Clutch Unit Type SSDC
          • Single Shaft Clutch Brake Unit Type SSCB
          • Hollow Shaft Clutch Brake Unit Type HSCBE
          • A.C. Fail Safe Brake Type AFS
          • Click Here to View Dimensions