Mumbai, Maharashtra, India
Our Products
| Longer Screen Life | |||
| Minimum Blinding | |||
| Takes less space | |||
| No Transmitted Vibration Greater capacity & more accurate screening |
| Tested to 3 times the rated lifting capacity. | |||
| State of art manufacture. | |||
| Smaller and lighter than ever. | |||
| Made with high energy rare earth NdFeB magnets. | |||
| Machined out from monolith structure and thus very stable. | |||
| Easily transportable. | |||
| Actuating lever with positive spring lock. |
This is Ideally used to collect the iron scrap from the workshop floor. Magnetic Plate with cover wheels and Handle in three different sizes are available.
| MSPL is a manufacturer of LM Model MS 18 B Table topdigital gauss meter, which is a low cost digital instrument for measurement of d.c. magnetic fields using Hall probes. It has ranges - 2k and 20k gauss. A built in calibration facility ensures quick check of calibration. All the controls are mounted on the front panel and are clearly designated. An attractive Plastic cabinet with carrying handle cum tilt bracket makes the instrument light in weight and portable LED display gives direct reading with 1 gauss resolution on the 2k range and 10 gauss resolution on the 20k range. The unit is supplied with a calibrate transverse hall probe of 50mm x 1.5mm with the actual sensing area of 1sq.mm from the tip. |
| magnetic plates are manufactured in various sizes & strengths to meet with specific operation & plant conditions. Magnetic plates are widely used for removing tramp iron such as bolts, nuts, bits of wire, nails and other casual contamination from free flowing materials to protect against occasional damage to the plant caused by bits of iron. | ||
| magnetic plates can ideally be used to remove tramp iron from the moving material carried in chutes ducts, spouts or on conveyor belts, screens and feed trays. Whether the material is plastic or paper pulp, food or fertilizer, oil seeds or gains the result is sure protection of processing machinery and iron free final products. | ||
| RE Magnetic Separators are useful in processing industry for removing Ferrous Material or very fine Iron impurities from Minerals, Refractories, Food Products, Glass, Slag, Ores etc. |
| MSPL is amanufacturerof high quality Magnetic Instruments includingGauss Meters. Our Model MS - 18 B Handhold, battery operated Gauss meter is manufactured in compliance with international quality standards. Fabricated using finest quality raw material our array is widely used by our clients for measuring measure DC magnetic field. Along with this our meter operates on 9V battery as well as on external 9V DC regulated supply.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Vibratory conveyors find wide application in cement plants, steel plants, fertilizer industries, pharmaceutical industries, glass industry etc, where controlled feeding of material is required. These conveyors have proved their reliability in transporting bulk material over limited distances. | ||
| Depending on requirement and applications vibrating conveyors are available in electromagnetic & electromechanical types. Electromagnetic conveyors make use of an electromagnetic drive for generation of vibrations whereas electromechanical conveyors are powered by two unbalance motors rotating in possible directions. Electromagnetic vibrators are used in applications where stepless variation of feed rate from 0-100% is required. On the other hand electromechanical vibrators are used where the feed rate is not required to be changed frequently during operation or where a relatively constant feed rate is required. | ||
| Electromechanical vibrating feeders are powered by two unbalance motors which rotate in opposite directions. These types of feeders can be supplied in two types viz, through type and tubular type depending on the type of application and material being conveyed. |
| Electromagnetic vibrating feeders are equipped with electromagnetic drives which generate vibrations required for conveying of material. The electromagnetic drives are robust in construction with very high reliability factor. These conveyors come with a specially manufactured controller required for operation of the electromagnetic conveyor. These controllers convert the input AC supply voltage into pulsating DC output which results in generation of vibrations. A thyristor such as a silicon controlled rectifier is used for this purpose. The fringe angle of the SCR can be varied sleeplessly using a potentiometer or an analogous electrical signal / PLC signal from an external command variable unit, which in turn increases / decreases the amplitude of vibrations thereby controlling the output of the conveyor as required. | | ||||
| As in the case of electromechanical feeders depending on the material conveyed, the conveyors can be supplied on two types viz, through type and tubular type. Suitable liners in case of through conveyors are provided where severely abrasive materials are handled as in the case of electromechanical conveyors. |
High intensity magnetic sampling probes are ideal for quality control personnel to quickly and easily carry outproduct purity inspectionson anypowder, granulateorliquidsforferrousandlightly magnetic contamination.
The probe should be used for sample inspection of product at inward goods, prior to despatch and at critical points throughout the process line for batch testing.
All product contact parts are manufactured using 316 grade stainless steel.
we are offering a range of magnetic chip conveyors that is widely used by the clients for handling metal chips. These magnetic conveyors are totally enclosed can be lowered in the sump and chips are collected outside in a drum or trolley.
magnetic filter are use for filtration of iron particles from products in liquid form. They are also frequently used in hydraulic circuits in cooling systems. Magnetic system is built up either of anisotropic ceramic or high intensity rare earth magnets. The magnet unit is enclosed in stainless steel or m. S. Housing making it suitable using in chemical, paper & ceramic industry.
Magnetic Plates are designed in various sizes & strengths to meet with specific operation & plant conditions. Magnetic Plates are widely used for removing Tramp iron such as Bolts, Nuts, Bits of Wire, Nails and other casual Contamination from free flowing materials to protect against occasional damage to the plant caused by bits of iron.
These are widely used in ceramic industries & are supplied along with aluminum/stainless steel funnels. The magnetic elements are made of anisotropic permanent magnets. Iron contamination in ceramic body & glaze is in the form of small particles and are removed when it passes through uniform gap between funnel & magnet. Following standard Sizes are available. Special sizes can be also supplied.
Magnetic Channel are used for the removal of iron from less strongly contaminated material from material like Rice, Flair, glaze, Slip (ceramic material), Glass, Mineral powder, Slurry, Chemical, Liquid material, Food products for any kind material processing machine or machine outlet.
