Post Buy Requirement

Stained, Etched & Laminated Glass

We offer the best product range of Earth Tempered Glass, Air Insulated Glass and Fire Heat Strengthened Glass.

Earth Tempered Glass

  • Clear glass Tinted glass
  • Reflective glass Low E glass with max emissivity k = 0.08
  • 4 mm 5 mm
  • 6 mm 8 mm
  • 10 mm 12 mm
  • 15 mm 19 mm
  • Minimum 300mm x 300mm
  • Maximum 2440mm x 3600mm

Tempered glass starts life as float glass. Float glass, when shattered breaks into large pieces and can be harmful; it is therefore unsuitable for applications. In the tempering process, the surfaces of the glass are heated in a furnace nearly over 670C.
The hot glass is then cooled rapidly by a blast of air over a period of between 3 and 10 seconds. As a result, the surfaces shrink, and tensile stresses develop on the surfaces.

Tempered glass is 5 times stronger glass than normal glass. It provides greater thermal strength. It offers increased resistance to both sudden temperature changes and temperature differentials up to 250C (as against 40C of normal glass).
Tempered glass is difficult to break. However if it does break under high impact, only small fragments without any sharp edges are formed.

Architectural Faades, Windows, Partitions

AutomotiveSide Window Glass, Windscreens, Back Glass

IndustrialLightning, White Goods, Modular Kitchen

SolarSolar Panels

View Complete Details

Air Insulated Glass

Two or more liters of glass are assembled and separated at a fixed interval using an aluminum spacer filled with a drying agent called desiccants to absorb the moisture within air space.
The surrounding edges of the double glazed units are then sealed first by a primary sealant and then by secondary sealant.

Insulated glass increases insulating properties of glass while substantially reducing condensation. This reduces load on air conditioning, reduces cost of HVAC, sound resistant and reduction in the greenhouse gases.
Applications Architectural Faades, WindowsIndustrialVisi Coolers

Glass Type
Tinted glass Reflective glass
Low E glass with max emissivity k = 0.08  
Glass Thickness
4 mm 5 mm 6 mm 8 mm
10 mm 12 mm    
Lower thermal conductivity gas filled Double Glazed Unit (DGU)
Krypton Gas Xenon Gas Argon Gas
Air Gap
5.5 mm 9.5 mm 14.5 mm 19.5 mm 6.5 mm
10.5 mm 15.5 mm 21.5 mm 7.5 mm 11.5 mm
16.5 mm 23.5 mm 8.5 mm 13.5 mm 17.5 mm
Glass size
Minimum 300mm x 300mm
Maximum 1500mm x 2000mm
Shapes
Triangle Trapezium Pentagon
Type of glazing
Doubled glazed unit Triple glazed unit Step glazing
View Complete Details

Fire Heat Strengthened Glass

  • Tinted glass Reflective glass
  • Clear Glass Low E glass with max emissivity k = 0.08
  • 5 mm 6 mm
  • 8 mm 10 mm
  • Minimum 300mm x 300mm
  • Maximum 2440mm x 3600mm

Heat Strengthened glass follows almost the same process as tempered glass, except that the annealed glass is heated to a slightly lower temperature of 620C and the volume and pressure of cooling process is less rapid.

BenefitsThe break pattern is large and the fragments tend to remain in the glazing. It is less prone to spontaneous breakage and provides better optics.
ApplicationsSpandrel and vision panels of curtain wall glass.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us