Magco Cranes

Bandra West, Mumbai, Maharashtra

MAGCO CRANES DESIGNS ELECTRO HYDRAULIC THRUSTER OPERATED BRAKES to Suit smooth application. This brake has:1) Self contained unit2) Low power consumption3) Minimum maintenance4) Overload or under load on thruster cannot cause damage to motor5) Thruster can be operated on 10 of the vertical.The brake operates on AC 415 V, 3ph, 50 Hz and is continuously rated

Crane accessories Totally enclosed Power Conductors Shrouded Bus Bar System Push Button Pendents Grabs BucketsGrabs Spreader Beams Radio Remote Controls Electro Hydraulic Thruster Brake Electro Magnetic Brake D.C. Brake Disc Brake Creep Speed Brake Foot Operated Brake Three Phase Magnetic Brake Electro Hydraulic Thruster Flexible Coupling Geared Coupling Tyre Coupling Clutches with Rectifier Panel Drum Controller Master Controller Shunt Limit Switch Gravity Limit Switch Geared Limit Switch Counter Weight Limit Switch Grab Differential Limit Switch Drum Switch S.S. Grid Type Resistance Box Punch Grid Resistance Box Trolley Wheels Control Panel Wire Rope Drum Current Collector Cable Trolley Remote Control Helical Gear Box Electro Magnetic Clutches Bus Bar Models of Radio Remote Controls

In workshops where part utilization of shop bay is required (as in a tool room attached to a press shop), a Semi-Goliath/Gantry Crane is used. In such a configuration one end-carriage of the crane will travel on the regular gantry rail while the opposite end-carriage will travel on a rail mounted typically on the ground or at a lower elevation.A Goliath/Gantry Crane is typically more expensive than an equivalent EOT Bridge Crane. However in almost all the relevant cases as mentioned above, a cost analysis shows that it is cheaper to go in for a Goliath / Gantry Crane as against a Bridge Crane. The cost analysis can be done by taking into consideration the following -

Cost of Gantry Girders that are required in case of a Bridge CraneCost of Columns required for supporting the above Gantry GirdersDifference in costs of civil foundation for columns (for Bridge Cranes) versus civil foundation for gantry rails (in Goliath / Gantry Cranes)Difference in Down Shop Leads cost of Bridge Crane versus Cable Reeling Drum and Cable Cost for a Goliath / Gantry CraneGoliath / Gantry Cranes can be either of the Single Girder type or Double Girder type.

If required, Magco Cranes can advise end users of the type of crane to be installed based on a cost benefit analysis.

COUNTER WEIGHT LIMIT SWITCHES are used for Heavy duty E.O.T. Cranes, Hoists to prevent over travel of hoisting motion on power and control circuit up to 500 v.a.c. and 40 Amps. continuous current.

Insulated conductors are manufactured as per international practices and are designed for Indian conditions. They are finding wide acceptance due to multiple advantages they offer. MAGCO CRANES are very compact, easy to install, colour coded and flexible in installation. They are designed as per international standards of 14 mm, center distance, 4M standard lengths. They are suitable for straightcurbed sections, switchingsectionalizing assemblies etc. The conductors can be cut, bent, assembled at site for all type of installations. One or more feed points at any position possible. Joints are designed for expansion and contraction.

MAGCO CRANES Insulated conductors are manufactured as per international practices and are designed for Indian conditions. They are finding wide acceptance due to multiple advantages they offer. MAGCO CRANES are very compact, easy to install, colour coded and flexible in installation. They are designed as per international standards of 14 mm, center distance, 4M standard lengths. They are suitable for straightcurbed sections, switchingsectionalizing assemblies etc. The conductors can be cut, bent, assembled at site for all type of installations. One or more feed points at any position possible. Joints are designed for expansion and contraction. All these advantages come at unbelievable economical prices.

The distinguishing characteristic of the MAGCO CRANES electric wire rope hoist is the extremely large rope drum, which has a protective effect on the rope. Very safe and efficient operation is furthermore guaranteed by a number of other standardized features, and all that for only a small investment.

Its no secret that we are really proud of our MAGCO CRANES wire rope hoist, because as far as wear and tear, hook movement and approach dimensions are concerned it simply leaves the competition standing. Firstly, someone has to come along and produce something which is even slightly comparable, but even then you would not be satisfied with the copy, would you?

Among experts, MAGCO CRANES electric wire rope hoists enjoy an excellent reputation, due to their outstanding design and the many extras that come as standard. The MAGCO CRANES hoists also include a wide range of features such as the incredible ratio between the diameters of the rope drum and the load rope, the powerful drive system, minimum load sway and small approach and structural dimensions. The application of technologies that reduce wear of the high-quality materials guarantees an extended service life of the equipment with high functional reliability. See for yourself what MAGCO CRANES electric wire rope hoists by SWF can do for you. If you are looking for maximum flexibility, the MAGCO CRANES is the right solution for you.

DOUBLE GIRDER BRIDGE CRANESform a major chunk of orders received by Magco Cranes annually. As a result, the company has successfully managed to refine this particular product over time to reflect changing customer needs and evolving technology.
The figure above shows a Double Girder Bridge crane with Auxiliary Hoist. Magco Cranes manufactures Double Girder Bridge cranes without the auxiliary hoisting feature also. Depending on the spans of the factory sheds, the Double Girder Bridge Crane can come either with a Single Drive system or a Twin Drive system.
Magco Cranes also makes cranes that have a cabin control feature as is seen in the picture on the left above.
Depending on the Safe Working Load of the crane, the Double Girder Bridge Cranes have either a carriage type travelling mechanism or a bogey type travelling mechanism.

MAGCO CRANES DESIGNS ELECTRO HYDRAULIC THRUSTER OPERATED BRAKES to Suit smooth application. This brake has:1) Self contained unit2) Low power consumption3) Minimum maintenance4) Overload or under load on thruster cannot cause damage to motor5) Thruster can be operated on 10 of the vertical.The brake operates on AC 415 V, 3ph, 50 Hz and is continuously rated

These hoists are rugged in design with steel load suspension plates, gears and load wheels made out of carbon steel, machined and hardened. All shafts are run on maintenance free bearings, life-time lubricated. Alloy steel heat treated and machine calibrated load chain of tested quality to IS 6216/DIN 5684, offer safe reliable and long life.

The hoist is driven by a hand chain wheel made from graded casting with an option of over load safety device. Built-in safety load brake, holds the load at any position.

These hoists are available in lifts ranging from 3 to 24 meters for indoor or outdoor use.

Every hoist is tested to 150% of the safe working load before dispatch and comply with all relevant BIS, BS and European occupational safety rules and are environment friendly.

MAGCO Hand Chain Hoist are maintenance free. However it is advisable that the chain is lubricated regularly.

Every hoist is supplied with test and guarantee certificate along with users manual.

MAGCO hoists are simple to install, easy to operate and maintain. All wearing out parts can be easily replaced.

These hoists are also available with Push-Pull trolley, Hand geared trolley, spark proof execution and also with many other features on request.