Post Buy Requirement
MS
Mumbai, Maharashtra, India
Add Review

Other Products / Services #4537945

Motorised Potentiometer

Use of 100% Electrical and Mechanical angle of rotation i.e. from zero to full Resistance Value of Potentiometer.Reliable Electronic circuit prevents Mechanical damage to Potentiometer at extreme end position, Unambiguous UpDown operations, Overload sensing circuit activates upon very fast inching of Potentiometer, prevents damage, Optional Potentiometer wattage 2, 3 or 5 Watt for ten turns, 1.5 Watt for five turns and 1 or 1.5 Watts for three turns or as per specific requirement, Multiple number of potentiometers can be fitted to operate with one motor, Resistance values of potentiometer from 100 to 50K Ohm,
View Complete Details

Weatherproof Enclosures

  • Feature Compact Weatherproof construction • Heavy Duty & Rugged • Durable Silver Gray UV-inhibited Powder coated
MES Weatherproof Enclosures are suitable for harsh outdoor Environments or indoor industrial applications. These can be used for outdoor wireless communication systems, security systems, hotspot applications, protection of equipment from corrosive environment and theft or damage. It has also even a place to house Surge Arrestor & Amplifier. We can do custom built enclosures based on project requirements for various types of Wireless Access Points.
View Complete Details

GD Tube Base

  • Features Bi-Directional • Wide band Performance
MES 7xxx GDLP series Gas Discharge Tube Based Lightning Protectors are in-line coaxial adapters using N Female connectors. Gas Discharge Tubes contain a field-replaceable gas capsule located between the inner and outer conductors. Their operating frequency band is DC to 6.0 GHz. Gas Discharge Tube Lightning Protectors are ideal when DC injection is required, for example when a Tower Mount Amplifier is utilized.
View Complete Details

Preselectors Products

  • Features Low Insertion Loss • Low Ripple in Pass Bandwidth • High Selectivity
MES 4000 series compact Preselectors are typically extruded Aluminum four cavity bandpass filters using Multi window configuration to realise high selectivity. These are used when additional filtering is required in receive path, typically in congested RF environment. It minimises out of band interference. The Preselectors are compact and offer stable response over extremeoperating temperature range. Custom built Preselectors are designedin addition to industry standard designs.
View Complete Details

100 Watts Power Splitters

  • Feature Broadband • Low VSWR
MES 3800100 XNC series 100 Watts Power Splitters are designed according to the principle of based on Chebychef Impedance transform. The outer body is made of Aluminum and Inner Conductor is Silver plated brass rod. For use in IBS networks, these are cavity based Splitters in 234 way Being wideband with superior characteristics it helps in keeping system losses low. In addition these are highly reliable. These Splitters are available in both N & DIN connectors. Mounting clamps are optionally provided with these Splitters. These Splitters are widely used in long distance Multi-channel Power Distribution System.
View Complete Details

Quarter Wave Stub

  • Features May pass low residual voltage of less than 15 volt s • Do not pass DC signals and thus incorporate a long stub element
MES Lightning Protectors are coaxial devices using N Female connection interfaces. These can operate at current and future wireless communication bands (2G, 3G)Maximum VSWR is less than 1.20 in the working frequency band. Our Lightning Protectors are silver plated with a Non-Magnetic BBR* over-plating to provide protection against corrosion. (*BBR is a non-magnetic material which provides a superior non-tarnishing surface). Our Lightning Protectors have dust and water protection complying IP67 for indoor and outdoor applications. These are reversible and can be used in either directions. These have been successfully tested under vibration, salt spray and thermal shock conditions.
View Complete Details

Multi Turn Potentionmeters

Compact Design, Good RepeatabilityLow TR Resistance WireNon Magnetic Stainless Steel ShaftNickel Plated Brass BrushGold Plated TerminalsSpecially Selected Wiper MaterialReinforced Eng. Plastic Housing
View Complete Details

50 Watts Power Splitters

  • Feature • High Isolation • Low VSWR • Low Insertion Loss
MES 380050 XNW series 50 Watts Power Splitters are based on Wilkinson PCB Design and are compact, high-performance used for connecting multiple Antennas to the radio unit. These can be used at repeater site for connecting Two Directional Antennas to the base unit instead of single Omni Directional Antenna.
View Complete Details

49005800 MHz Wilkinson Design

  • Features High Isolation • Low VSWR • Low Insertion Loss
MES 3490050 XNW series 50 Watts Power Splitters are based on Wilkinson PCB Design and are compact, high-performance used for connecting multiple Antennas to the radio unit. These can be used at repeater site for connecting Two Directional Antennas to the base unit instead of single Omni Directional Antenna.
View Complete Details

Cable Assemblies

Description MES manufactures and stocks a wide range of pigt ails & Jumper cables for WLAN Applications. All Cable assemblies are of Andrew make LMR type 100. 195, 200, 400 & 600 series cable. Andrew is a worldwide popular company & manufactures variety of RF cable and connectors. These are low loss cables and works extemely well for WLAN Applications. Nicely crimped and apply heat sleeves over the cable for fixing the connectors for optimal performance in RF System. We offer a wide selection of RF Connectors viz N, SMA, RP SMA, TNC RP TNC, BNC, MMCX etc All Connectors are from well establishes manufacturer. In addition, we do a lot of custom built cable assemblies based on project requirements for various types of Wireless Access points which includes cable type, length and type of connectors, Custom built Cable Assemblies are deliverd within 2 working days.
View Complete Details

Electronic Hooter

  • Weight of Unit 500 gms. (110/220v) 350 gms 12/24v)
olid-State Electronic Hooter 23 Watts Rms. With variable Tone and Volume Control.Single Variable Tone Output Frequency Range from300 Hz to 1000 Hz.Sound Pressure Level at the Distance of One Meter at Full Volume 95 dBA Rms.The units are stand alone OPTG. on 110V 230V AC 50 Hz or 12V 24V DC in flush rear panel mount.Power Consumption : at full volume 350mA.All Controls are accessible from rearHooters are housed in Din-Standard 96mm X96mm Cabinet, and available in Plastic or Metal(M.S.Sheet) in Black or Grey Colours, with suitable pair of mounting clamps.
View Complete Details

Turn Indicators Dials

Compact desig Aesthetic lookHigh Insulation Positive locking Counting capacity up to 15 turnsLeast count 1 part in 500 for ten turns potentiometerHigh temperature thermoplastic materialsStandard model for 6.35 mm shaft potentiometerM3 Allenkey screw for firm fitting with potentiometer's shaft High contrast numerical for easy readability at arms length distance.No backlash, Shaft Directly mounted on one piece moulded bush.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us