This is our heavy duty three roll pyramid type power operated plate bending machine in model TPH having capacity to bend 2500 x 25 mm in mild steel. The machine weighs about 6700 kgs and is equipped with 30 HP motor, siemens make on/off starter and reverse/forward switch complete with lubricaton system.

Some of the salient features of our three roll pyramid type plate bending machines are as under:

• Heavy duty steel fabricated housing amply proportioned to withstand maximum strain.
• Rollers are of forged EN-8 material and run in collar type gun metal bushes.
• Base is of heavy duty girders.
• Centralized lubrication system
• Drive through a series of hob cut properly hardened steel gears and worm reduction gear box.
• Screw jack is provided to keep the top roll in horizontal position when trunion is retracted to facilitate removal of formed shells.
• The machine is supplied complete with : - Elicon / Redicon make Reduction gear box- Electric motor 3 phase /440 volts / 50 cycles AC- Reversible switch (Upto 5 HP)- Reversible starter (Above 5 HP)

These Three Roll Pyramid Type Plate Bending Roller Machines are available in a wide range of capacities from 1250 x 3 mm in mild steel up to 3000 x 42 mm.

Kindly ask for details.

This is Traditional type Rolling Mill in Double Gear Design for Heavy Work Mountd on Suitable Stand. This is available in six inch to triple Gear Design Rolling Mill for upto Twelve inch Roller Length.

Motorized slip-out type bending machine is also available. Kindly ask for details.

This is steel fabricated body three roll motorised bending rollers. The machine is supplied complete with stand of suitable height. The drive is through series of properly hardened steel gears. This machine is available in various sizes and is suitable to work with mild steel sheets of upto 1500 x 3.0 mm. For higher capacities, three roll pyramid type plate bending machine is ideal.

This is a 6" x 3" roll size bench rolling mill with heavy duty roll housing and bigger gears. It is provided with EXTRA gears to provide HIGHER ROLL OPENING i.e. it allows thicker plates to be rolled due to higher roll opening as a result of extra gears. Also this model is provided with TWO big size roll driving gears instead of only ONE as in other Bench model rolling mills.

This is a lightweight portable mill, which can also be fitted with bangle design roll. It has been redesigned to facilitate working by removing the front support bars in front of rolls and taking the same underneath in the base

This bench model rolling mill is provided with lever system so that either sheet rolls or the wire rolls can be used at any one time with provision to fit side rolls. This machine is also available with a specially designed steel fabricated stand with 1.0 HP 220 volts single phase Cast Iron body TEFC AC electric motor, R/F switch and V belt. The R/F switch is provided complete with wiring to allow both reverse and forward operation.

This is a bench rolling mill with roll size of 5" x 2.1/2" and is available in three models. It is available with either the sheet rolls, or wire rolls or can be supplied with combined sheet and wire grooves in one single roll. Similar rolling mill is also available with roll size of 4" x 2.1/4" and 6" x 3" in the three different versions as for the 5" size rolling mill. Specially designed 6" x 3" roll size bench rolling mill is also available

This is our heavy duty three roll pyramid type power operated plate bending machine in model TPH having capacity to bend 2500 x 25 mm in mild steel. The machine weighs about 6700 kgs and is equipped with 30 HP motor, siemens make on/off starter and reverse/forward switch complete with lubricaton system.

Some of the salient features of our three roll pyramid type plate bending machines are as under:

• Heavy duty steel fabricated housing amply proportioned to withstand maximum strain.
• Rollers are of forged EN-8 material and run in collar type gun metal bushes.
• Base is of heavy duty girders.
• Centralized lubrication system
• Drive through a series of hob cut properly hardened steel gears and worm reduction gear box.
• Screw jack is provided to keep the top roll in horizontal position when trunion is retracted to facilitate removal of formed shells.
• The machine is supplied complete with : - Elicon / Redicon make Reduction gear box- Electric motor 3 phase /440 volts / 50 cycles AC- Reversible switch (Upto 5 HP)- Reversible starter (Above 5 HP)

These Three Roll Pyramid Type Plate Bending Roller Machines are available in a wide range of capacities from 1250 x 3 mm in mild steel up to 3000 x 42 mm.

Kindly ask for details.

This is Traditional type Rolling Mill in Double Gear Design for Heavy Work Mountd on Suitable Stand. This is available in six inch to triple Gear Design Rolling Mill for upto Twelve inch Roller Length.

Motorized slip-out type bending machine is also available. Kindly ask for details.

This is steel fabricated body three roll motorised bending rollers. The machine is supplied complete with stand of suitable height. The drive is through series of properly hardened steel gears. This machine is available in various sizes and is suitable to work with mild steel sheets of upto 1500 x 3.0 mm. For higher capacities, three roll pyramid type plate bending machine is ideal.

This is a 6" x 3" roll size bench rolling mill with heavy duty roll housing and bigger gears. It is provided with EXTRA gears to provide HIGHER ROLL OPENING i.e. it allows thicker plates to be rolled due to higher roll opening as a result of extra gears. Also this model is provided with TWO big size roll driving gears instead of only ONE as in other Bench model rolling mills.

This is a lightweight portable mill, which can also be fitted with bangle design roll. It has been redesigned to facilitate working by removing the front support bars in front of rolls and taking the same underneath in the base

This bench model rolling mill is provided with lever system so that either sheet rolls or the wire rolls can be used at any one time with provision to fit side rolls. This machine is also available with a specially designed steel fabricated stand with 1.0 HP 220 volts single phase Cast Iron body TEFC AC electric motor, R/F switch and V belt. The R/F switch is provided complete with wiring to allow both reverse and forward operation.

This is a bench rolling mill with roll size of 5" x 2.1/2" and is available in three models. It is available with either the sheet rolls, or wire rolls or can be supplied with combined sheet and wire grooves in one single roll. Similar rolling mill is also available with roll size of 4" x 2.1/4" and 6" x 3" in the three different versions as for the 5" size rolling mill. Specially designed 6" x 3" roll size bench rolling mill is also available