Our Products
Powder Filling Machine
1 Products availableNoodles Making Machine
1 Products availableLaces, Interlinings & Other Accessories
1 Products availableDryers
1 Products availableKitchen Appliances
1 Products availableKitchenware And Cookware
1 Products availableFood Grains & Nut Processing Machine
1 Products availableIndustrial Mixers
1 Products availableSnack Machine
1 Products availableOur Complete range of products are Sugar Packing Machine, Automatic Packing Line, Automatic Coffee Powder Stick Packaging Machine, Multihead Weigher Potato Chips Packing Machine and Dry Fruits Packing Machine.
Additional Information:
Delivery Time : 20 DAYS
Additional Information:
Delivery Time : 25 DAYS
Additional Information:
Delivery Time : 20 DAYS
Specifications
Product Application | Potato Chips, Flaky Snacks, Counted Goods |
---|---|
Sealing Type | Center Seal |
Packing Size | Width: upto 450 mm Length: upto 240 mm |
Feeding System | Conveyor System (1.5 to 2 M as required) |
Speed | 30 - 40 Pouch / Min (Depends on material to pack |
Main Motor | 1/2 HP, 220 V, 50 Hz, Single Phase |
Laminate | Any Heat Sealable Laminate |
Contact Parts | Food Grade Stainless SS 304 |
Attachments | Batch Cutting Device, Pneumatic Coding Device, Nitrogen Flushing |
Salient Features
Features | Advantages | Benefits |
---|---|---|
Operator Friendly / Low Maintenance Machine | Easy to Operate / Less Servicing Required | Very low Down Time / Increased Productivity |
Bucket Conveyor Feeding system | Any Irregular shaped product | Multi Purpose |
Customization (As per products) | Wide dozing system options | Can be used for products thus giving full utility |
Machine is Elegant, Castor Mounted. | Looks appealing, Easy to Install and move | Less labor required displacement |
Food Grade Stainless steel Contact parts | No rusting | Long Life, Hygienic Packing |
Photo Registration Control system | Automatic adjustment and correction of Pouch sealing | Savings on wastage |
Electronic Coding Device(At an extra cost) | To Print M.R.P, Month of Packing, Lot No. etc | Helps In Detecting Manufacturing and Expiry Date |
Note : The specification is for reference only can be change by manufacturer before prior notice. |
Specifications
Sealing Type | 3/4 Side Sealing |
---|---|
Roll Width | Min. 80 mm Max. 200 mm |
Heater Load | 1 KW |
Main Motor` | 1/2 H.P., 1/3 Phase |
Electrical Supply | 1 Phase, 220 V, AC, 50 Hz |
Packing Film | Any Heat Sealable Laminate |
Temperature Controller | PID Based |
Machine Speed | 40-50 Pouch / Min. (Depends upon the Pouch size, No. of Tracks and Materials to Pack) |
Contact Parts | Food Grade Stainless Steel SS 316 |
Speed / Machine Control | A.C Drive / PLC Based |
Machine Dimension | L( 1120) x W (900)x H (2000) mm |
Net Weight | 3500 Kg. (Approx.) |
Optional Attachments (At an extra cost) | Batch Cutting Pneumatic Coding Device |
Salient Features
Features | Advantages | Benefits |
---|---|---|
Option of Single/Two Track | Option of higher speed | Savings on Time/ Space/ Power and Economical |
Pneumatic Coding Device | To Print M.R,P, Month of Packing, Lot No. etc | Helps In Detecting Manufacturing and Expiry Date |
Batch Cutting Device | Cuts the Batch at Prefixed length | Ease of secondary packing |
Precision Sealing | No Laminate and Product wastage | Savings on wastage |
Photo Registration Control system | Automatic adjustment and correction of Pouch sealing | Savings on wastage |
Operator Friendly/Low Maintenance | Easy to Operate / Less Servicing Machine Required | High Run Time /Increased Productivity |
Machine is PLC controlled | Machine is centrally controlled | System runs in Synchronization |
Zipper Pouch Sealing | Pouch Can be Temporarily resealed manually | Repeat usage viability of bigger pouch |
Food Grade Stainless steel Contact parts | No rusting | Long Life, Hygienic Packing |
Option of Three side sealing | Less laminate Required | Savings on laminate |
Machine is Elegant, Castor Mounted | Looks appealing, Easy to Install and move | Less labor is required for displacement |
Machine is equipped with PID | Displays and controls Sealer's Temperature | Optimum Temperature for Sealing Better Sealing |
Specifications
Sealing Type | Center Sealing |
---|---|
Roll Width | 100 mm to 450 mm |
Main Motor | 1/2 H.P Single Phase |
Electrical Supply | 1 Phase, 220 V, AC, 50 Hz |
Packing Film | Any heat Sealable Laminate |
Compressed Air | 6 CFM @ 6 Bar |
Machine Speed | 40 Pouch / Min. (Depends upon the Pouch size and Weight of Product Filling) |
Machine Control | PLC |
Additional Attachments | Batch Cutting Device, Pneumatic Coding Device, Nitrogen Flushing Device |
Salient Features
Features | Advantages | Benefits |
---|---|---|
Option of Single/Two Track | Option of higher speed | Savings on Time/ Space/ Power and Economical |
Pneumatic Coding Device | To Print M.R,P, Month of Packing, Lot No. etc | Helps In Detecting Manufacturing and Expiry Date |
Batch Cutting Device | Cuts the Batch at Prefixed length | Ease of secondary packing |
Precision Sealing | No Laminate and Product wastage | Savings on wastage |
Photo Registration Control system | Automatic adjustment and correction of Pouch sealing | Savings on wastage |
Operator Friendly/Low Maintenance | Easy to Operate / Less Servicing Machine Required | High Run Time /Increased Productivity |
Machine is PLC controlled | Machine is centrally controlled | System runs in Synchronization |
Zipper Pouch Sealing | Pouch Can be Temporarily resealed manually | Repeat usage viability of bigger pouch |
Food Grade Stainless steel Contact parts | No rusting | Long Life, Hygienic Packing |
Option of Three side sealing | Less laminate Required | Savings on laminate |
Machine is Elegant, Castor Mounted. | Looks appealing, Easy to Install and move | Less labor is required for displacement |
Machine is equipped with PID | Displays and controls Sealer's Temperature | Optimum Temperature for Sealing' Better Sealing |
Nitrogen Flushing Device | Increased shelf life | Savings on expiry, rejection |
Note : The specification is for reference only can be change by manufacturer before prior notice |
Additional Information:
Payment Terms : L/C, D/P, T/T, Western Union,
Delivery Time : 30 days
Specifications
Sealing Type | Center Seal |
---|---|
Roll Width | 120 mm - 450 mm |
Feeding System | Auger Filler / Weigh Filler / Volumetric Cup Filler |
Main Motor | 1/2 H.P, AC Drive |
Electrical Supply | 220 V, AC, Single Phase, 50 HZ OR 440 V, AC, Three Phase, 50 Hz |
Packing Film | Any Heat Sealable Laminate |
Temperature Controller | PID |
Machine Speed | 60-75 Pouch / Min ( Depends upon Pouch Size and product weight to be filled) |
Contact Parts | Food Grand Stainless Steel SS 316 / SS 304 |
Compressed Air | 6 CFM @ 6 Bar (Depending On Attachments) |
Power Consumption | 3 kW |
Additional Attachments | Batch Cutting Device, Pneumatic Coding Device, Nitrogen Flushing |
Salient Features
Features | Advantages | Benefits |
---|---|---|
Intermittent Motion Machine | Efficient, effective packing | Savings on wastage |
Machine is PLC controlled | Machine is centrally controlled. | System runs in Synchronization |
Operator Friendly / Low Maintenance Machine | Easy to Operate / Less Servicing Required | High Run Time / Increased Productivity |
Food Grade Stainless steel Contact parts | No rusting | Long Life, Hygienic Packing |
Automatic pouch length Change mechanism | Automation | Length can be changed as requirement Less Changeover time, No change Parts |
Pneumatic Coding Device (At an extra price) | To Print M.R.P, Month of Packing | Helps In Detecting Manufacturing |
Batch Cutting Device | Cuts the Batch at Prefixed length | Ease of secondary packing |
Customization (As per products) | Wide dozing system options | Can be used for various products thus -giving full Utility |
Specifications
Feeding Head | Pneumatically Liquid pump |
---|---|
Filling | 200 ml - 1000 ml |
Approx Variation | ±2% upto 50gms. & ±1% above 50gms (depending upon the product size) |
Average Output | 20 TO 25 Pouches/min |
Packing Material | Any virgin film (e. g L. D. E. P. film ) of 80 to 120 microns thickness |
Style Of Pouch Forming | Pillow type (central sealed Pouches) |
Packing Film Width | Generally 330 mm |
Film Roll Core Diameter | ID 70 mm to 76 mm |
Outer Diameter Of Film Roll | Max 450 mm |
Sealing System | Comprised of Impulse Vertical Sealer & Impulse Horizontal Sealers |
Temperature Of Cooling Water | Preferably 5o to 15oC |
Water Circulation For Cooling Of Sealers | Approx. 100 Ltr / Hr |
Electric Supply | AC 220 V, Single Phase 50 Hz |
Peak Load At Peak | 6 KW (For Few Seconds) at the time Of Machine Start Up. |
Power Consumption | Approx 3 Kwh ( During Continuous Operation Of Machine) |
Compresed Air | Required - At pressure of minimum 6kg/cm |
Air Consumption | Approx 30 Cu m Compressed air per hour |
Mode Of Packing | Wooden Cases |
Net Weight | Approx. 350 kg |
Salient Features
Features | Advantages | Benefits |
---|---|---|
Option of Single/Two Track | Option of higher speed | Savings on Time/ Space/ Power and Economical |
Pneumatic Coding Device | To Print M.R,P, Month of Packing, Lot No. etc | To Print M.R,P, Month of Packing, Lot No. etc |
Batch Cutting Device | Cuts the Batch at Prefixed length | Ease of secondary packing |
Precision Sealing | No Laminate and Product wastage | Savings on wastage |
Photo Registration Control system | Automatic adjustment and correction of Pouch sealing | Savings on wastage |
Operator Friendly/Low Maintenance | Easy to Operate / Less Servicing Machine Required | High Run Time /Increased Productivity |
Machine is PLC controlled | Machine is centrally controlled | System runs in Synchronization |
Food Grade Stainless steel Contact parts | No rusting | Long Life, Hygienic Packing |
Machine is Elegant, Castor Mounted | Looks appealing, Easy to Install and move | Less labor is required for displacement |
Machine is equipped with PID | Displays and controls Sealer's Temperature | Optimum Temperature for Sealing Better Sealing |
Specifications
Feeding Head | Pneumatically Liquid pump |
---|---|
Filling | 200 ml - 1000 ml |
Approx Variation | ± 1% |
Average Output | 20 TO 25 Pouches/min |
Packing Material | Any virgin film (e. g L. D. E. P. film ) of 80 to 120 microns thickness |
Style Of Pouch Forming | Pillow type (central sealed Pouches) |
Packing Film Width | Generally 330 mm |
Film Roll Core Diameter | ID 70 mm to 76 mm |
Outer Diameter Of Film Roll | Max 450 mm |
Sealing System | Comprised of Impulse Vertical Sealer & Impulse Horizontal Sealers |
Temperature Of Cooling Water | Preferably 5o to 15oC |
Water Circulation For Cooling Of Sealers | Approx. 100 Ltr / Hr |
Electric Supply | AC 220 V, Single Phase 50 Hz |
Peak Load At Peak | 6 KW (For Few Seconds) at the time Of Machine Start Up. |
Power Consumption | Approx 3 Kwh ( During Continuous Operation Of Machine) |
Compresed Air | Required - At pressure of minimum 6kg/cm |
Air Consumption | Approx 30 Cu m Compressed air per hour |
Mode Of Packing | Wooden Cases |
Net Weight | Approx. 350 kg |
Salient Features
Features | Advantages | Benefits |
---|---|---|
Option of Single/Two Track | Option of higher speed | Savings on Time/ Space/ Power and Economical |
Pneumatic Coding Device | To Print M.R,P, Month of Packing, Lot No. etc | Helps In Detecting Manufacturing and Expiry Date |
Batch Cutting Device | Cuts the Batch at Prefixed length | Ease of secondary packing |
Precision Sealing | No Laminate and Product wastage | Savings on wastage |
Photo Registration Control system | Automatic adjustment and correction of Pouch sealing | Savings on wastage |
Operator Friendly/Low Maintenance | Easy to Operate / Less Servicing Machine Required | High Run Time /Increased Productivity |
Machine is PLC controlled | Machine is centrally controlled | System runs in Synchronization |
Food Grade Stainless steel Contact parts | No rusting | Long Life, Hygienic Packing |
Machine is Elegant, Castor Mounted | Looks appealing, Easy to Install and move | Less labor is required for displacement |
Machine is equipped with PID | Displays and controls Sealer's Temperature | Optimum Temperature for Sealing Better Sealing |
Specifications
Model Weighing Range | 10 grams - 1000 grams |
---|---|
Max. Machine Speed | 120wpm |
Max. Prod. Piece Length | 80 mm |
Volume | 3000cc |
Control / Display | Full Touch Screen |
Drive Mechanism | Stepper / Servo Motor |
No. of Weigh Heads | 14 |
Technical Specifications
Packing material | Potato Chips Type Snacks | ||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Film size | 100mm-450mm width x 100mm-250mm length | ||||||||||||||||||||||||||
Film Roll Type | Heat Sealable Laminated film | ||||||||||||||||||||||||||
Speed | 60 to 70 Pouch per minute | ||||||||||||||||||||||||||
Other Details
|
Additional Information:
Delivery Time : 20N Days
Feeding Head | Pneumatically Liquid pump |
---|---|
Filling | 200 ml - 1000 ml |
Approx Variation | ± 1% |
Average Output | 20 TO 25 Pouches/min |
Packing Material | Any virgin film (e. g L. D. E. P. film ) of 80 to 120 microns thickness |
Style Of Pouch Forming | Pillow type (central sealed Pouches) |
Packing Film Width | Generally 330 mm |
Film Roll Core Diameter | ID 70 mm to 76 mm |
Outer Diameter Of Film Roll | Max 450 mm |
Sealing System | Comprised of Impulse Vertical Sealer & Impulse Horizontal Sealers |
Temperature Of Cooling Water | Preferably 5o to 15oC |
Water Circulation For Cooling Of Sealers | Approx. 100 Ltr / Hr |
Electric Supply | AC 220 V, Single Phase 50 Hz |
Peak Load At Peak | 6 KW (For Few Seconds) at the time Of Machine Start Up. |
Power Consumption | Approx 3 Kwh ( During Continuous Operation Of Machine) |
Compresed Air | Required - At pressure of minimum 6kg/cm |
Air Consumption | Approx 30 Cu m Compressed air per hour |
Mode Of Packing | Wooden Cases |
Net Weight | Approx. 350 kg |
Salient Features
Features | Advantages | Benefits |
---|---|---|
Option of Single/Two Track | Option of higher speed | Savings on Time/ Space/ Power and Economical |
Pneumatic Coding Device | To Print M.R,P, Month of Packing, Lot No. etc | Helps In Detecting Manufacturing and Expiry Date |
Batch Cutting Device | Cuts the Batch at Prefixed length | Ease of secondary packing |
Precision Sealing | No Laminate and Product wastage | Savings on wastage |
Photo Registration Control system | Automatic adjustment and correction of Pouch sealing | Savings on wastage |
Operator Friendly/Low Maintenance | Easy to Operate / Less Servicing Machine Required | High Run Time /Increased Productivity |
Machine is PLC controlled | Machine is centrally controlled | System runs in Synchronization |
Food Grade Stainless steel Contact parts | No rusting | Long Life, Hygienic Packing |
Machine is Elegant, Castor Mounted | Looks appealing, Easy to Install and move | Less labor is required for displacement |
Machine is equipped with PID | Displays and controls Sealer's Temperature | Optimum Temperature for Sealing Better Sealing |
Specifications
Power | 50 Hz - 220 V Single Phase |
---|---|
Sealing Width (mm) | 300 mm (depends up on requirement) |
Heater (w) | 2"150 = 300 w |
Temperature controller | Yes |
Operated | Manually by Foot |
Specifications
Power | 50 Hz - 220 V Single Phase |
---|---|
Mechanical Dim. L x W x H (mm) | 2700 x 900 x 1800 |
Tunnel Dim. L x W x H (mm) | 1200 x 500 x 500 |
Heater (Kw) | 3" 4.5 = 13.5 kw |
Temp. oC | 250o Max |
Motor specifications | 1/2 HP Gear Motor + 1/4 HP x 2 ( Top + Bottom Blower) |
Conveyor Speed | Tunnel Time fix 25 Sec |
Specifications
Production rate | 25- 150 pack per minute (depending on the size of the product |
---|---|
Electric power consumption | 4 kw |
Pouch dimension | L- 70- 420 mm W= 140 mm (max.) H= 80 mm (max.) |
Maximum roll width | 400 mm |
Machine weight | 1000 kg (approx.) |
Motor specifications | 2 / 220v single phase |
Machine dimension | L= 146 inches W= 38 inches H= 64 inches |
Specifications
Power | 220 V AC, Single Phase, 50 Hz, 2.5 KW |
---|---|
Pouch Dimension (mm) | L 75mm-300mm.W 75mm to 280mm |
Compressed Air Required | 10 CFM @ 6 Bar |
Speed | 5-10 Pouches /min (Depends upon pouch width and Operator) |
Specifications
Power | 50 Hz - 220 V Single Phase |
---|---|
Mechanical Dim. L x W x H (mm) | 2700 x 900 x 1800 |
Tunnel Dim. L x W x H (mm) | 1200 x 500 x 500 |
Heater (Kw) | 3.4.5 = 13.5 kw |
Temp. oC | 250o Max |
Motor specifications | 1/2 HP Gear Motor + 1/4 HP x 2 ( Top + Bottom Blower) |
Conveyor Speed | Tunnel Time fix 25 Sec |