Maashu Enterprises

Camp, Belgaum, Karnataka

Cork-Elastomer Jointings are suitable for many fluid sealing applications in the automotive, engineering and electrical industries. Cork-Rubber products hold up well under external environmental conditions and have the advantage of minimal side flow compared to most rubber materials and generally possess better load distribution across the sealing faces.The majority of grades available utilise either Nitrile or Neoprene as the blended rubber binder; other blends, such as Silicone and cross blends are available for specific process duties and cover obligatory industry specifications. Our sales office will appropriately recommend the most effective material where such specifications are requested.Most grades retain flexibility down to -25OC and can withstand maximum operating temperatures in liquids up to 110OC. The Chemical Suitability Guide below is intended only as a guide as the possible effect of elevated temperatures needs to be considered when determining the compatibility of these products with a given chemical.Requirement Recommended MaterialAir, Water, Water/Glycol Nitrile or Neoprene bonded CorkFuel & Diesel Oil Nitrile or Neoprene bonded CorkLubricating Oil Mineral Nitrile or Neoprene bonded CorkLubricating Oil Synthetic Nitrile bonded CorkHydraulic Oil Mineral Nitrile or Neoprene bonded CorkWater/Oil Emulsion Special Blend Nitrile/Neoprene/Butyl bonded Cork

OP (Oil & Petrol) Paper Jointing is an economical cellulose fibre-based material impregnated with a glue glycerine composition, or plasticised gelatine depending on the grade. It is predominantly used in the automotive industry as a gasket material for carburettors, fuel and oil pumps, gear casings and pipeline flanges. It has excellent resistance to fuels, oils and most organic solvents and is ideal for use at low bolt loadings.

A v-belt is a unique mechanical linkage with a cross-section that resembles an isosceles trapezoid. The v-belt and its complementing pulley create the most efficient belt drive known (sometimes achieving 98% transmission efficiency). V-belts were developed in the early days of automobile innovation to improve belt reliability and torque transmission from the crankshaft to rotating assemblies. V-belts remain a common type of serpentine belt today.

GATES, DUNLOP, NOK, BANDO FENNER, HILTON, BrowningJohn Deere AND OTHER BRANDS

Machine screwswith a thread cutting (self tapping) point. . HexBolts Boltswith a hexagonal head with threads for use with anutor tapped hole. .Socket Screws Socket.Acorn nutsare a high crown type ofcap nut, used for appearance.

Gasket Trading is a recognized leading manufacturer of high quality compressed non-asbestos gaskets and seals. Our companys reputation for excellence has been built on our ability to provide our valued customers with the most effective designing, engineering solutions to meet their most demanding applications. Our main objective is to continuously exceed our customers expectations by providing them with high performance gaskets and sealing products, competitive pricing, on-time delivery and exceptional customer service. Maintain a facility along with knowledgeable, technically-oriented professionals enabling us to consistently meet all of your blueprint specifications and tolerance requirements.

NAG die cut gasketsproduces custom die cut gaskets and water jet cut gaskets using Garlock, Thermoseal (Klinger), Frenzelit, Durlon, Teadit brands of compressed non-asbestos materials for all applications.

Garlock Blue-Gard Gaskets

Garlock Blue-Gard compressed non-asbestos materials, including (but not limited to); Blue-Gard 3000, Blue-Gard 3200/3400 and Blue-Gard 3300, Blue-Gard 3700.Blue-Gard 3000 (Blue): is a unique blend of aramid fibers with a nitrile binder.

Blue-Gard 3200/3400 (Off White/Black Blue-Gard 3300 (Black) Blue-Gard 3700 (Light Grey)

Thermoseal (Klingersil) Gaskets

Klingersil Gasket. produces die cut gaskets and water jet cut gaskets in a variety of Thermoseal (Klinger) compressed non-asbestos materials, including (but not limited to); C-4201, C-4300, C-4401, C-4324, C-4430 and C-4433.

Klingersil C-4201 (white) to 700F. Klingersil C-4300 (white/green) . Klingersil C-4401 (green) Klingersil C-4430

Gasket Resources Durlon Gaskets

Durlon Gasket. produces die cut gaskets and water jet cut gaskets in a variety of Durlon compressed non-asbestos materials, including: Durlon 8400, Durlon 8500, Durlon 8600 and Durlon 8700.

Durlon 8400 (gold): Durlon 8500 (green): Durlon 8600 (White): Durlon 8700 (blue)

Frenzelit Novapress Gaskets

Frenzelit Gasket produces die cut gaskets and water jet cut gaskets in a variety of Frenzelit Novapress compressed non-asbestos materials, including (but not limited to); Novapress Basic, Novapress Universal, Novapress Flexible 815, Novapress Multi II and Multi EG.

Novapress Basic: Novapress Universal: Novapress Flexible 815: Novapress Multi II and Multi EG (blue):

Teadit Gasket produces die cut gaskets and water jet cut gaskets in a variety of TEADIT compressed non-asbestos materials, including (but not limited to); NA1001, NA1076, NA1080, NA1081, NA1085, NA1090, NA1092, NA1100 and NA1000M.

NA1001 (green): NA1076 (multiple colors): NA1080 (white/off-white): NA1081 (blue) NA1085 (purple) NA1090 (multiple colorsNA1092 (grey) NA1100 (black) NA1000M (black)

This style spiral wound gasket is for heat exchangers where pass bars are required. The outer portion is of standard spiral wound construction. The rib portion is normally of single or double jacketed style. The ribs securely fastened to the ID of the spiral wound portion.

SKF, FAG, KOYO, TIMKEN, NTN, NACHI Bearing Select is a web-based bearing selection tool that calculates the rating life of rolling bearings. The calculations are based on the theories presented in the SKF, FAG, KOYO, TIMKEN, NTN, NACHI Rolling bearings catalogue - 10000EN.

SKF , FAG, KOYO, TIMKEN, NTN, NACHI Bearing Select has the following features:

• Compatible with its predecessor, SKF, FAG, KOYO, TIMKEN, NTN, NACHI CADalog
• Calculation of rolling bearing rating life for a single bearing or two bearings on a shaft
• Easy access through the Internet
• No installation of software necessary
• Integrated report generator for quick documentation
• Aligned with the latest version of the SKF, FAG, KOYO, TIMKEN, NTN, NACHI Rolling bearings catalogue - 10000EN
• Updated bearing database containing the latest product data including SKF, FAG, KOYO, TIMKEN, NTN, NACHI Explorer bearings
• Possibility to store input files on the server or locally on your own computer

Mersen offers a comprehensive line of North American (UL and CSA) and European IEC (DIN, NF, BS) fuses, fusegear, and fuse systems.Providing the widest range of circuit protection products in the industry means that we offer solutions for everyone from OEMs and panel builders to MROs and electrical contractors.

Make us your single source for circuit protection, and well show you how to save time, reduce your costs, and consolidate your inventory.

Tubular Level gauge for visual liquid level observation is very common in process industry. It is a simple and reliable device for direct reading in atmospheric or pressurized tank applications. It is mounted parallel, along the side of tank. As the process level fluctuates, the level in the transparent glass tube changes accordingly and gives local liquid indication.
Technical Specification :New Bolted Gland with teflon packing ensures positive leak tightness for full vacuum as well as 10kg/cm2 pressure service.

An ignition coil is an induction coil in an automobile's ignition system which transforms the battery's low voltage to the thousands of volts needed to create an electric spark in the spark plugs to ignite the fuel. . wires that go from the distributor to each of the spark plugs are called spark plug wires or high tension leads

High-intensity discharge lamps (HID lamps) are a type of electrical gas-discharge lamp which produces light by means of an electric arc between tungsten electrodes housed inside a translucent or transparent fused quartz or fused alumina arc tube. This tube is filled with both gas and metal salts.

This specification describes products composed of dense elastomeric Synthetic Rubber / silicone rubber that are fabricated into gaskets and accessories (such as setting blocks, spacers, and shims) for use in sealing and glazing applications in building construction. These products are used to seal or serve as components of compression sealing systems between mechanically restrained surfaces in building construction and also as components in structural silicone sealant glazing systems.

ERIKS extruded o-ring cord is a cost effective and simple alternative for manufacturing custom size jointed O-Rings for static applications.

O-ring cord is available in diameters from 1mm to 30mm, in a range of elastomers including Nitrile(NBR), Viton(FKM), Silicone(VMQ), Ethylene Propylene Diene Monomer(EPDM) and others on request.

Seals have a crucial impact on system performance. Life and reliability of what is often considered a simple component can make all the difference to your products and operations. SKF has more than 100 years of experience in various industries and applications, and is the only company that can support key aspects of the sealing system through its knowledge of bearings, seals, lubrication and associated science and technology. SKF offers expert advice and provides support throughout the life cycle of your sealing system