Maashu Enterprises

Camp, Belgaum, Karnataka

Cork-Elastomer Jointings are suitable for many fluid sealing applications in the automotive, engineering and electrical industries. Cork-Rubber products hold up well under external environmental conditions and have the advantage of minimal side flow compared to most rubber materials and generally possess better load distribution across the sealing faces.The majority of grades available utilise either Nitrile or Neoprene as the blended rubber binder; other blends, such as Silicone and cross blends are available for specific process duties and cover obligatory industry specifications. Our sales office will appropriately recommend the most effective material where such specifications are requested.Most grades retain flexibility down to -25OC and can withstand maximum operating temperatures in liquids up to 110OC. The Chemical Suitability Guide below is intended only as a guide as the possible effect of elevated temperatures needs to be considered when determining the compatibility of these products with a given chemical.Requirement Recommended MaterialAir, Water, Water/Glycol Nitrile or Neoprene bonded CorkFuel & Diesel Oil Nitrile or Neoprene bonded CorkLubricating Oil Mineral Nitrile or Neoprene bonded CorkLubricating Oil Synthetic Nitrile bonded CorkHydraulic Oil Mineral Nitrile or Neoprene bonded CorkWater/Oil Emulsion Special Blend Nitrile/Neoprene/Butyl bonded Cork

OP (Oil & Petrol) Paper Jointing is an economical cellulose fibre-based material impregnated with a glue glycerine composition, or plasticised gelatine depending on the grade. It is predominantly used in the automotive industry as a gasket material for carburettors, fuel and oil pumps, gear casings and pipeline flanges. It has excellent resistance to fuels, oils and most organic solvents and is ideal for use at low bolt loadings.

Gasket Trading is a recognized leading manufacturer of high quality compressed non-asbestos gaskets and seals. Our companys reputation for excellence has been built on our ability to provide our valued customers with the most effective designing, engineering solutions to meet their most demanding applications. Our main objective is to continuously exceed our customers expectations by providing them with high performance gaskets and sealing products, competitive pricing, on-time delivery and exceptional customer service. Maintain a facility along with knowledgeable, technically-oriented professionals enabling us to consistently meet all of your blueprint specifications and tolerance requirements.

NAG die cut gasketsproduces custom die cut gaskets and water jet cut gaskets using Garlock, Thermoseal (Klinger), Frenzelit, Durlon, Teadit brands of compressed non-asbestos materials for all applications.

Garlock Blue-Gard Gaskets

Garlock Blue-Gard compressed non-asbestos materials, including (but not limited to); Blue-Gard 3000, Blue-Gard 3200/3400 and Blue-Gard 3300, Blue-Gard 3700.Blue-Gard 3000 (Blue): is a unique blend of aramid fibers with a nitrile binder.

Blue-Gard 3200/3400 (Off White/Black Blue-Gard 3300 (Black) Blue-Gard 3700 (Light Grey)

Thermoseal (Klingersil) Gaskets

Klingersil Gasket. produces die cut gaskets and water jet cut gaskets in a variety of Thermoseal (Klinger) compressed non-asbestos materials, including (but not limited to); C-4201, C-4300, C-4401, C-4324, C-4430 and C-4433.

Klingersil C-4201 (white) to 700F. Klingersil C-4300 (white/green) . Klingersil C-4401 (green) Klingersil C-4430

Gasket Resources Durlon Gaskets

Durlon Gasket. produces die cut gaskets and water jet cut gaskets in a variety of Durlon compressed non-asbestos materials, including: Durlon 8400, Durlon 8500, Durlon 8600 and Durlon 8700.

Durlon 8400 (gold): Durlon 8500 (green): Durlon 8600 (White): Durlon 8700 (blue)

Frenzelit Novapress Gaskets

Frenzelit Gasket produces die cut gaskets and water jet cut gaskets in a variety of Frenzelit Novapress compressed non-asbestos materials, including (but not limited to); Novapress Basic, Novapress Universal, Novapress Flexible 815, Novapress Multi II and Multi EG.

Novapress Basic: Novapress Universal: Novapress Flexible 815: Novapress Multi II and Multi EG (blue):

Teadit Gasket produces die cut gaskets and water jet cut gaskets in a variety of TEADIT compressed non-asbestos materials, including (but not limited to); NA1001, NA1076, NA1080, NA1081, NA1085, NA1090, NA1092, NA1100 and NA1000M.

NA1001 (green): NA1076 (multiple colors): NA1080 (white/off-white): NA1081 (blue) NA1085 (purple) NA1090 (multiple colorsNA1092 (grey) NA1100 (black) NA1000M (black)

This style spiral wound gasket is for heat exchangers where pass bars are required. The outer portion is of standard spiral wound construction. The rib portion is normally of single or double jacketed style. The ribs securely fastened to the ID of the spiral wound portion.