Maars Technologies

S. R. Nagar, Hyderabad, Telangana

The powerful transmitter is easy to use and provides the output signal that meets the needs.ProcessMaster FEP300 is a versatile, reasonably priced, most accurate flow meter tailored for all process industry applications. A flowmeter with base functionality, short delivery and a simple and clearly understandable documentation.

• Versatile and simple configuration

Through glass configuration eliminating the need to remove the cover and reducing commissioning timeSoft key based functionality"Easy Set-up" function

• State-of-the-art memory technology

Data storage enables transmitter exchange without the need for reconfiguration

• Diagnostics for real-life-situations

Simplified plant trouble shootingStatus messages in accordance with NAMURHelp texts in LCD display

• ScanMaster in situ verification software option

Allows the customer to perform in situ verification of the flowmeter and the plant

General specifications:

• Measuring value error

Standard 0.4 % of rate, optional 0.2 % of rate

• Nominal diameter

DN 3 to 2000 (1/10to 80 in.)

• Process connection

Flange in accordance with DIN 2501 / EN 1092-1, ASME B16.5 / B16.47, JIS, AS2129

• Nominal pressure

PN 10 to100, ASME CL 150, 300, 600, 900, 1500, 2500

• Lining

Hard rubber, soft rubber, PTFE, PFA, ETFE, Linatex

• Communication

HART, PROFIBUS PA, FOUNDATION Fieldbus

• Explosion protection approvals

ATEX, IECEx, FM, cFM, NEPSI, GOST

Special features:

• Process diagnosis

Empty pipe and partially filling detection

With no up or downstream piping requirements the compact Coriolis flowmeters can be installed in the tightest spaces, enabling applications not possible before. The FCB400 seriesdelivers:

Up to five modular I/OsMultivariable meter designOptional plug-in cardsAutomatic firmware update

SmartSensorAll digital solutionInstallation flexibilityMeter intelligence located in the sensor

SensorApplicationMemoryMaximum data securityPlug and play electronics replacement

ABB common look and feelEasy Set-upOperation through the glass via capacitive keys

VeriMass on-board verification and diagnosticsOnline preventive maintenanceExtended maintenance cyclesReduced maintenance effort

• Designed for 70 C (158 F) ambient temperature and high vibrations
• Lower pressure drop
• Self-draining
• Global approvals for explosion protection

General specifications:

Nominal sizes / measuring rangesDN 15 (1/2 in.) / 0 to 8, 000 kg/h (17, 637 lb/h)DN 25 (1 in.) / 0 to 35, 000 kg/h (77, 162 lb/h)DN 50 (2 in.) / 0 to 90, 000 kg/h (198, 416 lb/h)DN 80 (3 in.) / 0 to 250, 000 kg/h (551, 156 lb/h)DN 100 (4 in.) / 0 to 520, 000 kg/h (1, 146, 404 lb/h)DN 150 (6 in.) / 0 to 860, 000 kg/h (1, 895, 975 lb/h)

Ex approvalsATEX zone 0/1/2, cFMus Div 1/2 and zone 0/1/2

Wetted materials1.4404 / 1.4435 (316L) or Hasteloy C

Accuracyfor liquidsFCB430Mass and volume: 0.4 % o. r. / 0.25 % o. r. / 0.2 % o. r.Density: 10 g/lFCB450Mass: 0.15 % o. r. / 0.1 % o. r., volume: 0.15 % o. r.Density:2 g/l or 1 g/l

Measuring medium temperatureFCB430-50 to 160 C (-58 to 320 F)FCB450-50 to 205 C (-58 to 400 F)

The KMICRO is mounted on top of the vessel or tank. The microprocessor in the KMICRO fires an electronic pulse that the transducer converts into an acoustic pulse. The pulse travels to the level that is being measured and is reflected back to the transducer. The transducer then converts the energy back into an electronic signal and stops the counter in the microprocessor, which then knowing the speed of sound through the air, can accurately determine the distance. The powerful software removes false echoes and the electronic filter removes ambient noise.

• Up to 32 ft. / 10 m Measuring Range
• Low Cost, Compact Level Transmitter with Integral Transducer
• 128 x 64 Dot Matrix Display
• Ease of Installation & Configuration
• Continuous Level Transmitter and Level Switch
• Auto Variable Power Control for Difficult Applications
• Temperature Compensation
• Password Protection
• No Maintenance
• Integrated KSCOPE Analytical Software

VortexMaster flow meters are used for accurate measurement of the flow of gas, liquid and steam over a wide temperature range. Vortex meters are ideal for measuring petrochemical raw materials, demineralized water and direct steam mass flow, cost-effectively by employing integral temperature measurement. The VortexMaster FSV450is the advanced version with additional analog input for mass or energy flow measurement. Available with integral or remote transmitter with up to 30 m (98 ft.) cable length. Using optional inputs discrete flow computers are not longer needed in many applications.

General specifications:

• Intuitive operation

Easy Set-up functionClear text displayMeter configuration through the front glass with closed cover

• Process connection / meter sizes

Flange-mount design / DN 15 to 300 (1/2 to 12 in.)Wafer type design / DN 25 to 150 (1 to 6 in.)

• Integrated flow measurement computer functionality

Gas standard volume and mass flowVapor mass flowDirect energy calculation for vapor and waterNatural gas calculation in accordance with AGA /SGERG standards

This transmitter features in-field replaceable electronics module that thanks to the auto-configuration functionality dramatically improves plant productivity. Its intuitive plug-and-play display with easy setup procedure really helps users by saving time and lowering maintenance and inventory costs. Moreover, the innovative TTG (Through The Glass) technology allow users to configure the instruments in the field without removing the windowed front cover and consequently to save a lot of time setting all parameters by using the finger tips in few minutes. In addition, 266DSH features Plugged Impulse Line Detection as standard helping customer in detecting when the impulse line are going to be plugged. This is real predictive maintenance.SIL2/SIL3 certification issued by TV Nord according to IEC 61508 represents another key-feature within 266 pressure transmitter portfolio. This certification is a real guarantee of protection and makes of 266DSH the smartest fit in Safety-critical loops.

266DSH features WirelessHART communication protocol allowing the addition of pressure measurement points throughout your operation. You can now monitor hard-to-reach locations and keep your employees out of dangerous and hazardous areas. The 266 WirelessHART Pressure Transmitters have a battery life of about 10 years at 32 sec update rates, delivering a very cost-effective and reliable solution to monitor your process assets. Shorten installation times by eliminating complex wired infrastructures, and lower overall implementation costs of process measurement, with ABB wireless devices featuring WirelessHART communications Measurement made easy.