Our Products
Pipe Tees
2 Products availableStainless Steel Sheet
1 Products availableMetal Sheets
1 Products availableMetal & Metal Products
1 Products availableChemical Reactors & Process Tanks
1 Products availableSteel Coils
1 Products availableStainless Steel Pipes
1 Products availableStainless Steel Plates
1 Products availableAlloy Pipes
1 Products availableWe are leaders in the market for providing best range of Steel Boiler Plates, Steel Shipbuilding Plates, ASTM A 516 Carbon Steel Plate, A516 HIC Resistant Carbon Steel Plate and Carbon Steel Plates
Supplementary Requirements
There are a number of additional supplementary requirements for A516 and A387. Some of these can only be met at the time of manufacturing – for example S1 and whether we are able to fulfil your requirements depends on the plates that we have in available or which are due in. Other requirements such as S5 and S8 can be met on request. | ||
Supplementary Requirement | A516 | A387 |
---|---|---|
S1 | X | X |
S2 | X | X |
S3 | X | X |
S4.1 | X | X |
S5 | X | X |
S6 | X | X |
S7 | X | X |
S8 | X | X |
S9 | X | X |
S11 | X | X |
S17 | X | X |
S53 | X | |
S54 | X | |
S60 | X | |
S62 | X |
Standard Composition
Element | % Composition |
---|---|
C | 0.18 |
Mn | 0.90 - 1.60 |
Si | 0.1 - 0.5 |
P | 0.04 |
S | 0.04 |
Al | 0.02 |
Nb | 0.02 - 0.05 |
V | 0.05 - 0.1 |
Ti | 0.02 |
Cu | 0.35 |
Cr | 0.2 |
Ni | 0.4 |
Mo | 0.08 |
Specifications
Type | AH36 | DH36 | EH36 |
---|---|---|---|
Tensile Strength (ksi | 71 - 90 | 71 - 90 | 71 - 90 |
Tensile Strength (MPa) | 490 - 620 | 490 - 620 | 490 - 620 |
Yield Point (ksi) | 51 | 51 | 51 |
Yield Point (MPa) | 355 | 355 | 355 |
Elongation in 200mm (%) | 19 | 19 | 19 |
Elongation in 50mm (%) | 22 | 22 | 22 |
Charpy V-Notch Test Temperature | 0oC | -20oC | -40oC |
SSC Test Certs
On this page we have a summary sample test certificate showing example plates A516 70 and values for each one.
A 516 Gr. 70 + NACE - Product Descriptions
Hot Tensile Test
Impact Test
Chemical Analysis | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Heat | C 70 | C | SI | MN | P | S | N | CU | MO | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Heat 1 | Y | 0.18 | 0.38 | 1.2 | 0.01 | 0 | 0.01 | 0.01 | 0.01 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Heat 2 | Y | 0.18 | 0.36 | 1.18 | 0.01 | 0 | 0.01 | 0.02 | 0.01 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Heat 3 | Y | 0.18 | 0.37 | 1.19 | 0.01 | 0 | 0.01 | 0.13 | 0.01 |
Heat | C 70 | NI | CR | V | NB | SN | TI | ALT | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Heat 1 | Y | 0.020 | 0.223 | 0.001 | 0.001 | 0.001 | 0.001 | 0.051 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Heat 2 | Y | 0.030 | 0.213 | 0.001 | 0.001 | 0.001 | 0.002 | 0.040 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Heat 3 | Y | 0.021 | 0.012 | 0.001 | 0.019 | 0.001 | 0.002 | 0.042 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SSC Sizes & Dimensions
Our SA516 plates are tested to NACE (MR0175) in the following dimensions. Plate sizes and thicknesses are the same as standard ASME SA 516 plates.
A/SA 516 + SSC Standard Plate Sizes
|