Other Products / Services #237883

We Stockiest & Supplier of premium quality stainless steel flats, angle, channel & stainless steel round bars, which find application in different industries. While the angle channels are hot rolled, solution annealed, pickled and straightened, the bars are available in both varieties that include cold drawn & polished and centreless ground & polished. These angle channel & steel round bars are widely used as machined components, pump shafts, valves, fasteners, machine tools etc.

Round Bars ( Cold Drawn )

Application:Machined Components, Pump Shafts, Valves, Fasteners, Machine Tools, Dairy Equipments, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Pins, Hinges and Handles.

Grade:904L, 304L, 310, 316, 316L, 410, 420,

Condition:Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished

Diameter:(Size) 2 mm to 12mm (1/8" to 1/2") 6mm to 40mm (1/4" to 1 1/2")

Diameter Tolerance:h9 (Din 671), h11ASTM A 484 H7, h8, h9 (Din 671)ASTM A 484

Length:As per requirement Upto 7 mtrs with a min. length tol. of -0+/100mm As per requirement Upto 7 mtrs with a min. length tol. of -0+/100m

We offer different kinds of SS 904L fasteners to ensure that all are perfectly executed with no room for error.

Range :
10 to m100 ,

Form :
Stud Bolts, Nuts, Washer

STAINLESS STEEL 904L CNC COMPONENTS :

STAINLESS STEEL 904L CNC COMPONENTS AVAILABILITY :

Seamless Pipe 1/2" W

STAINLESS STEEL 904L CNC COMPONENTS SPECIFICATION :

ASTM B677, B366
ASME SB677, SB366

STAINLESS STEEL 904L CNC COMPONENTS DESCRIPTION :
904L is a high-alloy austenitic stainless steel with low carbon content. The grade is intended for use under severe corrosive conditions. It has been application proved over many years and was originally developed to resist corrosion in dilute sulfuric acid. It is standardized and approved for pressure vessel use in several countries. Structurally, 904L is fully austenitic and is less sensitive to precipitation ferrite and sigma phases than conventional austenitic grades with high molybdenum content. Characteristically, due to the combination of relatively high contents of chromium, nickel, molybdenum and copper 904L has good resistance to general corrosion, particularly in sulfuric and phosphoric conditions.

STAINLESS STEEL 904L CNC COMPONENTS DESIGN FEATURES :

Good resistance to pitting and crevice corrosion.
Very good resistance to stress corrosion cracking.
Good resistance to intergranular corrosion.
Good formability and weldability.
Maximum service temperatures of 450 deg.C. (824 deg.F).

STAINLESS STEEL 904L CNC COMPONENTS TYPICAL APPLICATIONS :

Production and transport of sulfuric acid
Metal pickling in sulfuric acid
Production and concentration of phosphoric acid
Use in seawater, brackish water, condensers, heat exchangers and pipe work in general
Paper and allied industries
Gas washing
Chemical and pharmaceutical industries

STAINLESS STEEL 904L CNC COMPONENTS TENSILE REQUIREMENTS :

Tensile Strength (KSI) 70
Yield Strength (KSI) 25
KSI can be converted to MPA (Megapascals) by multiplying by 6.895.

Since our establishment, we have gained immense experience in the field of manufacturing, supplying and exportingStainless Steel 904L Profile like Flat Strip, Circles, RingsThese are offered in varied dimensions to cater to the needs of different industry segments such as metallurgy, petroleum, chemical, medical equipment and nuclear energy. We are supplied with the fine grade stainless steel, which is utilized while making the offered product with the help of modern machinery.

Stainless Steel Flat Stripis acknowledged in the market for the below mentioned attributes :

• Fine finish
• Smooth edges
• High tensile strength
• Rust-proof
  Industrial Stainless Steel Ringsis acknowledged in the market for the below mentioned attributes :
  
  Features :
  
  
• Non-abrasive
• Oil resistant
• High tensile strength
• Accurate dimensionRing Circle is offered to customers in variety of shapes and sizes at fair market rate.
  
  Capacity
  
  
• 1.5mm to 70mm Thickness
• OD upto 2500mm

We Manufacture an exclusive range of SS 904L Fabricated Products like Ss 904l Fabricated Pipes, SS 904l Mitered Bend, SS 904l Pipe Spools, Stainless Steel Fabricated Products, Steel Pipe Spools, Steel Mitered Bend etc. These products are fabricated using high grade stainless steel materials using innovative techniques.

We Manufacture this Products with DP test and 100% Radiography, Solution Annealing, Pickling and Passivate with Final Inspection .

1. Raw materials Testing.

2. Plate Cutting from Plazma machine.

3. Bending or Rolling in die.

4. Gauging, Grinding, Bevelled etc.

5. DP test and 100% Radiography.

6. Solution Annealing

7. Pickling and Passivate

8. Identity Mark and Marking

9. Final Inspection

Form :
Fabricated Pipe 3 mtr long.
Mitered bend
Lateral
Pipe Spools

We offer wide range of storage tanks which have domestic as well as industrial usage. They are available in different shapes viz. elliptical, dished, flat or conical head as per the requirements of clients.Specifications :

• Material : stainless steel 904L. / cladding plate of austenitic stainless steel
• Temperature : -70 - 350^oc
• Pressure : -0.1 - 9.9mpa
• Max. Volume : 100M3
• Equipped with inside coil, outside coil, jacket or U tube
  A pressure vessel is a device mounted on a hot water heater or boiler. These pressure vessel are specifically designed to release high steam pressure in the tank and thus prevent tank explosions. Equipped with specialty valves, our finished pressure valves are used in a variety of pneumatic, hydraulic and cryogenic applications to provide protection from over-pressure in steam, gas, air and liquid lines. The self-operating pressure vessel are installed to prevent over pressurization of the system. The valves facilitates letting off the steam when safe pressure level is exceeded. Moreover the valves get closed when the pressure level drops to the preset level.Application Area :
  
  
• Petrochemicals
• Pneumatic equipments
• Hydrocarbons
• Chemical Processing

We offer an Tailor made Plate cut profile as per your requirement and need.

Thickness :
03mm to 20mm thick

Size :Customize size

Form :
Plate cut size, blank or circle, flat, Strip, Ring ( Flange )

We manufacture and export high quality stainless steel 904 L flanges. We also engaged in customization of these Stainless Steel 904 L Flanges as per the client's requirement by following International quality standards.

Size :
1/2" NB to 36 NB

Standard :
150#, 300#, 600#, 900#, 1500#, 2500# In ASA 150 & ASA 300
Form :
Slip On - SORF, Weld Neck - WNRF, Socket Weld - SWRF, BLIND - BLRF, Lapped Joint,

Adfit, leading manufacturers & exporters of pipe fittings in India. We supplies various pipe fittings including buttweld seamless pipes and welded pipe fittings, SS 904L Plate, SS 904L Flanges & Branch connections in different sizes, range, type and schedule-class. Adfit regularly supplies its material to core industries such as Sulphuric Acid and phosphoric acid plants, seawater heat exchangers, chemical plants, food processing plants