We are one of the major organizations that deal in extremely efficient Rebar Threading Machine that is widely acknowledged for its high-speed performance and durability. Our Rebar Threading Machine is appreciated for high machining accuracy, easy operation, low breakdown rate and simple operation. Our Rebar Threading Machine is can be applied to substandard threaded steel and it also helps in reducing the labor intensity.

Specifications :

• capacity 10mm to 40mm, motor power 3HP.
• capacity 12mm to 65mm, motor power 7.5HP, with lead screw arrangement various threads.

We are offering GI Pipe Threading Machine that features a portable design and offer great flexibility for maximizing the operations of every tube industry. Our GI Pipe Threading Machine is immensely appreciated for attributes like sturdy construction, easy operation, high speed, low maintenance and low power consumption. Our clients can avail GI Pipe Threading Machine at affordable price from us.

Features :

• The pillar type pipe threading and end facing machines are best suited for the tube mills, scaffolding equipment manufacturers, small pipe component manufacturers and allied industry. These machines are most robustly and ergonomically designed to give best and long term performances in most sever conditions.
• The tooth of the gears in the head stock are most precisely cut on the hear hobbing machine to give noiseless operation and then are undergone for the heat treatment Of flame hardening which leads to the lesser wear tear and hence leads to longer life of the gear.
• The spindle mounted in the headstock is provided with taper roller bearings to carry out the heavy-duty operations and all time accurate and noiseless operations. After long-term use, if backlash is found in the bearings then it can be removed with the slight adjustment of check nut and locknut.
• The surfaces of the pillar guide-ways are grounded and are provided with hard chrome plating for smooth operation and lesser wear and tear during operation.
• The clamping device is provided with single set of clamps for small 0.D pipes and double set of clamps for greater 0.D of the pipes. The tooth of the clamps are insert type so that when this portion is worn out then only inserts can be easily changed rather than changing the whole of the clamp.
• For the threading machine the adjustment for the die-head can be done with the single hand operation with the box spanner, which is provided with the die-head.

Details :

• capacity 12mm to 65mm inch, motor power 7.5 HP.
• capacity 25mm to 100mm, motor power 10 HP.
• capacity 65mm to 152mm, motor power 15 HP.
• capacity 100mm to 200mm, motor power 20 HP.

Price :  3000 USD min

We are offering a heavy-duty Semi Automatic Pipe Threading Machine that is widely acknowledged for its durability and high strength. Our Semi Automatic Pipe Threading Machine is an automatic machine that is hydraulic operated and appreciated for its speedy performance. Semi Automatic Pipe Threading Machine that we offer has spindle speed of approx. 25 and 50 RPM. 

Features :

• The pillar type pipe threading and end facing machines are best suited for the tube mills, scaffolding equipment manufacturers, small pipe component manufacturers and allied industry. These machines are most robustly and ergonomically designed to give best and long term performances in most sever conditions.
• The tooth of the gears in the head stock are most precisely cut on the hear hobbing machine to give noiseless operation and then are undergone for the heat treatment Of flame hardening which leads to the lesser wear tear and hence leads to longer life of the gear.
• The spindle mounted in the headstock is provided with taper roller bearings to carry out the heavy-duty operations and all time accurate and noiseless operations. After long-term use if backlash is found in the bearings then it can be removed with the slight adjustment of check nut and locknut.
• The surfaces of the pillar guide-ways are grounded and are provided with hard chrome plating for smooth operation and lesser wear and tear during operation.
• The clamping device is provided with single set of clamps for small 0.D pipes and double set of clamps for greater 0.D of the pipes. The tooth of the clamps are insert type so that when this portion is worn out then only inserts can be easily changed rather than changing the whole of the clamp.
• For the end-facing machine the tool adjustment for the various diameters, can be done by single bolt clamping and declamping.
• For the threading machine the adjustment for the die-head can be done with the single hand operation with the box spanner, which is provided with the die-head. 

Additional Information :

• Price : 3000 USD min

Our Scaffolding Pipe Threading Machine is designed using advanced engineering concepts and optimum quality components. Scaffolding Pipe Threading Machine that we offer is immensely accredited for attributes such as sturdy construction, easy operation, low maintenance and long term performance. Our Scaffolding Pipe Threading Machine is available with a lead screw and used for cutting 4 T.P.I.

Features :

• The pillar type pipe threading and end facing machines are best suited for the tube mills, scaffolding equipment manufacturers, small pipe component manufacturers and allied industry. These machines are most robustly and ergonomically designed to give best and long term performances in most sever conditions.
• This machine is fitted with lead screw arrangement due to which most precise threading are developed and also enhancing the life of die head chasers.
• The spindle mounted in the headstock is provided with taper roller bearings to carry out the heavy-duty operations and all time accurate and noiseless operations. After long-term use if backlash is found in the bearings then it can be removed with the slight adjustment of check nut and locknut.
• The surfaces of the pillar guide-ways are grounded and are provided with hard chrome plating for smooth operation and lesser wear and tear during operation.
• The clamping device is provided with single set of clamps for small 0.D pipes and double set of clamps for greater 0.D of the pipes. The tooth of the clamps are insert type so that when this portion is worn out then only inserts can be easily changed rather than changing the whole of the clamp.
• For the threading machine the adjustment for the die-head can be done with the single hand operation with the box spanner, which is provided with the die-head.

Details : capacity 20mm to 65mm, motor power 7.5 HP. threading length 400mm, with lead screw arrangement of 4 T.P.I acme thread.

Additional Information :

• Price : 3000 USD min

PVC Pipe Threading Machine is widely used for the purpose of threading PVC pipes of different sizes. Our PVC Pipe Threading Machine is manually operated and very simple-to-use. PVC Pipe Threading Machine that we offer has spindle RPM of 60, 101 and 134 (approx.). Our PVC Pipe Threading Machine is appreciated for sturdy construction, low maintenance and longer functional life.

Features :

• The pillar type pipe threading and end facing machines are best suited for the tube mills, scaffolding equipment manufacturers, small pipe component manufacturers and allied industry. These machines are most robustly and ergonomically designed to give best and long term performances in most sever conditions. sic
• The tooth of the gears in the head stock are most precisely cut on the hear hobbing machine to give noiseless operation and then are undergone for the heat treatment Of flame hardening which leads to the lesser wear tear and hence leads to longer life of the gear.
• The spindle mounted in the headstock is provided with taper roller bearings to carry out the heavy-duty operations and all time accurate and noiseless operations. After long-term use if backlash is found in the bearings then it can be removed with the slight adjustment of check nut and locknut.
• The surfaces of the pillar guide-ways are grounded and are provided with hard chrome plating for smooth operation and lesser wear and tear during operation.
• The clamping device is provided with single set of clamps for small 0.D pipes and double set of clamps for greater 0.D of the pipes. The tooth of the clamps are insert type so that, this portion is worn out then only inserts can be easily changed rather than changing the whole of the clamp.
• For the threading machine the adjustment for the die-head can be done with the single hand operation with the box spanner, which is provided with the die-head.

Details :

• capacity 12mm to 65mm, motor power 5 HP., with lead screw arrangement various thteads.
• capacity 25mm to 100mm, motor power 7.5 HP., with lead screw arrangement various threads.
• capacity 65mm to 152mm, motor power 10HP., with lead screw arrangement various threads.
• capacity 100mm to 200mm, motor power 15HP., with lead screw arrangement various threads.

 Price : 3000 USD min

We are one of the major organizations that deal in extremely efficient Rebar Threading Machine that is widely acknowledged for its high-speed performance and durability. Our Rebar Threading Machine is appreciated for high machining accuracy, easy operation, low breakdown rate and simple operation. Our Rebar Threading Machine is can be applied to substandard threaded steel and it also helps in reducing the labor intensity.

Specifications :

• capacity 10mm to 40mm, motor power 3HP.
• capacity 12mm to 65mm, motor power 7.5HP, with lead screw arrangement various threads.

We are offering GI Pipe Threading Machine that features a portable design and offer great flexibility for maximizing the operations of every tube industry. Our GI Pipe Threading Machine is immensely appreciated for attributes like sturdy construction, easy operation, high speed, low maintenance and low power consumption. Our clients can avail GI Pipe Threading Machine at affordable price from us.

Features :

• The pillar type pipe threading and end facing machines are best suited for the tube mills, scaffolding equipment manufacturers, small pipe component manufacturers and allied industry. These machines are most robustly and ergonomically designed to give best and long term performances in most sever conditions.
• The tooth of the gears in the head stock are most precisely cut on the hear hobbing machine to give noiseless operation and then are undergone for the heat treatment Of flame hardening which leads to the lesser wear tear and hence leads to longer life of the gear.
• The spindle mounted in the headstock is provided with taper roller bearings to carry out the heavy-duty operations and all time accurate and noiseless operations. After long-term use, if backlash is found in the bearings then it can be removed with the slight adjustment of check nut and locknut.
• The surfaces of the pillar guide-ways are grounded and are provided with hard chrome plating for smooth operation and lesser wear and tear during operation.
• The clamping device is provided with single set of clamps for small 0.D pipes and double set of clamps for greater 0.D of the pipes. The tooth of the clamps are insert type so that when this portion is worn out then only inserts can be easily changed rather than changing the whole of the clamp.
• For the threading machine the adjustment for the die-head can be done with the single hand operation with the box spanner, which is provided with the die-head.

Details :

• capacity 12mm to 65mm inch, motor power 7.5 HP.
• capacity 25mm to 100mm, motor power 10 HP.
• capacity 65mm to 152mm, motor power 15 HP.
• capacity 100mm to 200mm, motor power 20 HP.

Price :  3000 USD min

We are offering a heavy-duty Semi Automatic Pipe Threading Machine that is widely acknowledged for its durability and high strength. Our Semi Automatic Pipe Threading Machine is an automatic machine that is hydraulic operated and appreciated for its speedy performance. Semi Automatic Pipe Threading Machine that we offer has spindle speed of approx. 25 and 50 RPM. 

Features :

• The pillar type pipe threading and end facing machines are best suited for the tube mills, scaffolding equipment manufacturers, small pipe component manufacturers and allied industry. These machines are most robustly and ergonomically designed to give best and long term performances in most sever conditions.
• The tooth of the gears in the head stock are most precisely cut on the hear hobbing machine to give noiseless operation and then are undergone for the heat treatment Of flame hardening which leads to the lesser wear tear and hence leads to longer life of the gear.
• The spindle mounted in the headstock is provided with taper roller bearings to carry out the heavy-duty operations and all time accurate and noiseless operations. After long-term use if backlash is found in the bearings then it can be removed with the slight adjustment of check nut and locknut.
• The surfaces of the pillar guide-ways are grounded and are provided with hard chrome plating for smooth operation and lesser wear and tear during operation.
• The clamping device is provided with single set of clamps for small 0.D pipes and double set of clamps for greater 0.D of the pipes. The tooth of the clamps are insert type so that when this portion is worn out then only inserts can be easily changed rather than changing the whole of the clamp.
• For the end-facing machine the tool adjustment for the various diameters, can be done by single bolt clamping and declamping.
• For the threading machine the adjustment for the die-head can be done with the single hand operation with the box spanner, which is provided with the die-head. 

Additional Information :

• Price : 3000 USD min

Our Scaffolding Pipe Threading Machine is designed using advanced engineering concepts and optimum quality components. Scaffolding Pipe Threading Machine that we offer is immensely accredited for attributes such as sturdy construction, easy operation, low maintenance and long term performance. Our Scaffolding Pipe Threading Machine is available with a lead screw and used for cutting 4 T.P.I.

Features :

• The pillar type pipe threading and end facing machines are best suited for the tube mills, scaffolding equipment manufacturers, small pipe component manufacturers and allied industry. These machines are most robustly and ergonomically designed to give best and long term performances in most sever conditions.
• This machine is fitted with lead screw arrangement due to which most precise threading are developed and also enhancing the life of die head chasers.
• The spindle mounted in the headstock is provided with taper roller bearings to carry out the heavy-duty operations and all time accurate and noiseless operations. After long-term use if backlash is found in the bearings then it can be removed with the slight adjustment of check nut and locknut.
• The surfaces of the pillar guide-ways are grounded and are provided with hard chrome plating for smooth operation and lesser wear and tear during operation.
• The clamping device is provided with single set of clamps for small 0.D pipes and double set of clamps for greater 0.D of the pipes. The tooth of the clamps are insert type so that when this portion is worn out then only inserts can be easily changed rather than changing the whole of the clamp.
• For the threading machine the adjustment for the die-head can be done with the single hand operation with the box spanner, which is provided with the die-head.

Details : capacity 20mm to 65mm, motor power 7.5 HP. threading length 400mm, with lead screw arrangement of 4 T.P.I acme thread.

Additional Information :

• Price : 3000 USD min

PVC Pipe Threading Machine is widely used for the purpose of threading PVC pipes of different sizes. Our PVC Pipe Threading Machine is manually operated and very simple-to-use. PVC Pipe Threading Machine that we offer has spindle RPM of 60, 101 and 134 (approx.). Our PVC Pipe Threading Machine is appreciated for sturdy construction, low maintenance and longer functional life.

Features :

• The pillar type pipe threading and end facing machines are best suited for the tube mills, scaffolding equipment manufacturers, small pipe component manufacturers and allied industry. These machines are most robustly and ergonomically designed to give best and long term performances in most sever conditions. sic
• The tooth of the gears in the head stock are most precisely cut on the hear hobbing machine to give noiseless operation and then are undergone for the heat treatment Of flame hardening which leads to the lesser wear tear and hence leads to longer life of the gear.
• The spindle mounted in the headstock is provided with taper roller bearings to carry out the heavy-duty operations and all time accurate and noiseless operations. After long-term use if backlash is found in the bearings then it can be removed with the slight adjustment of check nut and locknut.
• The surfaces of the pillar guide-ways are grounded and are provided with hard chrome plating for smooth operation and lesser wear and tear during operation.
• The clamping device is provided with single set of clamps for small 0.D pipes and double set of clamps for greater 0.D of the pipes. The tooth of the clamps are insert type so that, this portion is worn out then only inserts can be easily changed rather than changing the whole of the clamp.
• For the threading machine the adjustment for the die-head can be done with the single hand operation with the box spanner, which is provided with the die-head.

Details :

• capacity 12mm to 65mm, motor power 5 HP., with lead screw arrangement various thteads.
• capacity 25mm to 100mm, motor power 7.5 HP., with lead screw arrangement various threads.
• capacity 65mm to 152mm, motor power 10HP., with lead screw arrangement various threads.
• capacity 100mm to 200mm, motor power 15HP., with lead screw arrangement various threads.

 Price : 3000 USD min