Post Buy Requirement
AC
Add Review

Other Products / Services

We offer the best product range of Kemox RC 822 and Permanent Lake Red.

Kemox RC 822

Kemox RC 822 is a silica alumina and organic treated titanium dioxide pigment produced by the chloride process. It has the highest degree of gloss and tint retention properties in exterior film applications. It is characterized by an optical balance of high initial gloss, ease of dispersion, opacifying power and exterior weathering properties. Application : Kemox RC 822 is recommended for interior and exterior enamels and lacquers for industrial and architectural purpose.

Typical Properties

Titanium Dioxide   %91.5
Rutile content   %99+
Specific Gravity4
 Bulk density(g/cc) 0.87
Treatment Al, Si
Oil Absorption19.7g oil/100 g pigment
pH7.1
Volatile matter at 105 c (%)0.6
Average practical size microns,(Microtrac)0.33
Chalk resistanceHigh
Grit (325 mesh)%<0.2
ISO 591 ClauseR2
View Complete Details

Permanent Lake Red

Permanent Lake Red CT(P) is the most opaque of all lake reds with good stability, fastness to chemicals and excellent dispersion characteristics. It is useful for electrical grade applications. Technical Recommendation :
  • Plastics
  • PVC (Rigid)
  • PVC (Flexible)
  • Polyolefins
  • Rubber
  • Plastics Master Batches
Technological Characteristics :
  • Specific Gravity at 20oC -1.83
  • Sieve Residue - 0.1 % max
  • Moisture Content - 1.0 % max
  • pH of Water Extract - 6.0 to 8.0
  • Specific Conductivity - < 0.15 ms cm

Specifications

Product NamePermanent LakeFull Tone
Code No.5303
 Chemical ClassMonoazo Red - Barium Salt
Colour Index NamePigment Red 53:1Tint Tone
Colour Index No.15585:1
Basic Pigment C.A.S No.5160-02-1
View Complete Details

Pigment Red 2B Toner

Permanent Pigment Red 2B Toner is a bluish red pigment having high color strength, premium flow, excellent dispersibility and moderate fastness properties. This Pigment Red 2B Toner is used extensively in per pairing paste and liquid inks, PVC, etc.We are a prominent name to get the Pigment Red 2B Toner Industrial Chemical. Applications
  • PVC
  • PO
  • PS
  • Rubber
  • Offset Inks
  • Printing Inks
Fastness to Solvents and Reagents
  • White Spirit-4
  • Xylene/Toluene-3-4
  • N Butanol-4
  • Butyl Acetate-3
  • MethylEthyl Ketone-3
  • LinseedOil-4
  • DibutylPhthalate-3
  • Soap-2
  • Wax-4
  • EdibleOilsandFats:5
  • Water-4-5
  • Acid-4
  • Aklali-4
  • Lime-4
  • Detergent-3-4
  • Properties

    DimentionsPVCPS
    Standard Depth (1/3g/kg)5.101.35
    Purity (o)66.565.0
    Ligh Fastness Mass Tone6-75-6
    Light Fastness Tint Tone4-54
    Heat Resistance Celcius--235-245
    Weathering Fastness----
    Fastness to Bleeding4-54-5

    Details

     Product NamePermanent Red 2B Tonner  (Red RC)
     Code No.4802
     Chemical ClassMonoazo Pigment - Calcium Lake
     Colour Index NamePigment Red 48:2
     Colour Index No.15865:02:00
     Basic Pigment C.A.S. No.7023-61-2
     Density1.80 g/cm3
     Bulk Volume8.5 L/Kg
     Alkali Fastness3
     Acid Resistance5
     Specific Surface50 m2/g
    Note : This technical information is offered for guidance, but without guarantee.
    View Complete Details

    Pigment Rubine Toner

    Pigment Rubine Toner [BN] is a rosinated type deep bluish tone with high transparency & high tinctorial strength with moderate light fastness & poor weather fastness. It has versatile use in those printing inks where demands on fastness properties are not too high. It also recommended for low cost air drying paint system Light Fastness
    • 1/1Depth : 4-5 [16.5%]
    • 1/3 Depth : 3-4[8.3%]
    • 1/25 Depth : 3[1.6%]
    Technical Recommendation
    • Printing Inks
      • Letterpress Inks
      • Offset Inks
      • NC based Liquid Inks
      • Flexo/Gravure Inks
    • Plastics
      • Air Drying Enamel Paints
      • N C Lacquer PaintsDry Colours
    • Other Applications
      • Rubber
      • Leather
      • PVC
      • Plastics

    Specifications

    Product NamePigment Rubine Toner (BN)Full Tone
    Code No.5701
    Chemical ClassMonoazo Red - Calcium LakeTint Tone
    Colour Index NamePigment Red 57:1
    Colour Index No.15850:1
    Basic Pigment C.A.S. No.5281-04-9

    Physical Characteristics

    Specific Gravity at 20oC1.550
    Sieve Residue0.5 % max
    Heat Stability200oC
    Moisture Content1.0 % max
    PH of Water Extract7.0
    Oil Absorption60-70 CC
    Water Soluble3% Max
    Fastness Characteristics
    Water4-5
    Ethanol2-3
    Butanol2-3
    Acetone3
    Toludine3
    Mineral Turpentine Oil3
    Methyl Ethyl Ketone 2-3
    Linseed Oil4
    Butyl Acetate3
    Soap2
    Suitable : Restrictedly Suitable Note : This technical information is offered for guidance, but without guarantee.
    View Complete Details

    Titanium Dioxide (OpaTi)

    Titanium Dioxide (OpaTi) is a vital ingredient for diverse industrial applications. Titanium Dioxide is the most commonly-used white pigment in the world. More than four million tonnes are used annually for a variety of industrial applications like manufacturing of Paint, Rubber, Paper, Detergents, Cosmetics, Printing Inks, Textiles, and Plastics among other products.
    • OpaTi-Titanium Dioxide is produced from high quality Ilmenite, supplied by one of our sister concern, V.V. Mineral.
    • Through constant interaction with our customers, we are continuously fine tuning OpaTi to meet the specific purpose of different applications.

    Specifications

    Titanium Dioxide - AnataseGuaranteedTypical
    Titanium Dioxide (Percent by Mass)98.0 (min)98.25
    Volatile Matter (Percent by Mass)0.30 (max)0.27
    Matter Soluble in Water (Percent by Mass)0.35 (max)0.27
    pH of Water Suspension (20% Slurry)6.5 to 8.07.50
    Specific Gravity3.803.80
    Oil Absorption g/100g20 to 3024
    Tinting Strength1200 (min)1240
    Residue on 325 Mesh (Percent by Mass)0.1 (max)0.08
    Fe (ppm)10050
    DispersibilityFreely Dispersible In Aqueous & Non-Aqueous Media
    We procure Titanium Dioxide (OpaTi) from VVTi Pigments, which is a leading producer of OpaTi Grade Titanium Dioxide in India.
    View Complete Details

    Titanium Dioxide (Anatase)

    We present Titanium Dioxide (Anatase), which is an ingredient of :
    • All types of white and pastel shades of paints
    • White walled tyres and car tyres Glazed paper
    • Plastics Printed fabrics Soaps and face powders
    • Flooring materials like linoleum, white mosaics etc.
    • Pharmaceutical and cosmetic products
    • Electronic components
    • Materials for interior decoration
    • Foot-wear and leather goods
    • Dyes and printing inks
    We primarily deal in
    • Titanium Dioxide
    • Anatase Special Grade
    • Anatase Granular Grade
    • Anatase Rayon Grade
    View Complete Details
    Tell Us What are you looking for? Will call you back

    Contact Us