Our Products
Turbine Components
1 Products availableCleaning Wipes & Liquids
1 Products availableVacuum Cleaner
1 Products availablePumps, Pumping Machines & Parts
1 Products availableOur product range contains a wide range of rotary vacuum pumps, Liquid Ring Vacuum Pumps, Vacuum Pressure Pumps, VACUUM / PRESSURE PUMPS and Rotary High Vacuum Pumps
LVV SERIESUNIQUE FEATURES
| A unique design of lubricating system positively feeds minimum quantity of oil to important points. The oil from the exhaust isbaffled, collected and returned back to oil chamber. This way not only the intervals between oil top up is prolonged, but also helpsto keep the atmosphere in the premises free of oil smoke to some extent. |
| Specifically heat treated fibre vanes are used in ACMEVAC pumps in place of steel vanes. The advantages are silent running, and negligible wear on stator, end covers and rotor slots |
| ACMEVAC pumps are driven by V-belt covered with belt guard to give vibration free operation, and are fan cooled. |
| The complete unit with motor and base plate is most compact for its capacity and due to its vibration free running is suitable formounting inside the equipment. |
| All the models in LVV series can be modified to suit specific application so that smallest possible pump with minimum power consumption can be offered to the user. |
APPLICATIONS
Pharmaceutical, Chemical & Industrial Machines. | |
Filling, Transferring, Holding. | |
Conveying, packing, Filtering. |
TECHNICIAL SPECIFICATIONS
Model | FAD Displacement Lits/Min | Vacuum HG | H.P. Reqd. H.P |
---|---|---|---|
LVV 300 | 300 | 26" | 1.0 |
LVV 500 | 500 | 24" | 2.0 |
LVV 1000 | 1000 | 24" | 3.0 |
LVV 1500 | 1500 | 24" | 5.0 |
OUTSTANDING FEATURES:
Silent and considerably vibration free running | |
Needs no silencer. | |
Mechanical shaft seals on either end of shaft | |
Maximum vacuum using water as sealant at 300Centigrade and at sea level conditions : | |
Single stage models will be 700 mm Hg. | |
Double stage models will be 720 mm Hg. | |
Negligible maintenance and easy overhauling procedures. | |
Modification for use as compressor possible. |
MATERIAL OF CONSTRUCTION :Bronze/Stainless steel impeller, Stainless steel shaft and all other contact parts in cast iron. Complete Stainless Steel Pumps are also offered.
Model | Suction 710 |
Capacity 660 |
(M3/Hr) 600 |
At Vacuum 450 |
(mm Hg) 75 |
HP | RPM | Service Liquid LPM |
---|---|---|---|---|---|---|---|---|
2T-10 | 6 | 10 | 15 | 18 | 18 | 1 | 2850 | 5 |
2T-75 | 70 | 100 | 125 | 150 | 166 | 7.5 | 1440 | 18 |
2T-150 | 90 | 130 | 170 | 210 | 255 | 12.5 | 1440 | 22 |
2T-200 | 130 | 180 | 225 | 275 | 330 | 15 | 1440 | 33 |
2T-250 | 180 | 230 | 300 | 355 | 410 | 20 | 1440 | 38 |
2T-300 | 235 | 310 | 385 | 450 | 510 | 25 | 1440 | 44 |
2T-400 | 400 | 500 | 600 | 670 | 690 | 30 | 960 | 60 |
2T-500 | 400 | 580 | 670 | 780 | 830 | 40 | 960 | 77 |
2T-700 | 500 | 750 | 900 | 1050 | 1150 | 50 | 960 | 85 |
2T-900 | 600 | 900 | 1150 | 1300 | 1450 | 60 | 960 | 155 |
Double Stage
Model |
Suction Capacity (M3/Hr) |
HP | RPM | Service Liquid LPM |
||||
---|---|---|---|---|---|---|---|---|
720 | 660 | 600 | 450 | 75 | ||||
2T-30 | 23 | 35 | 44 | 50 | 50 | 3 | 2850 | 7 |
2T-50 | 32 | 62 | 75 | 80 | 80 | 5 | 2850 | 10 |
2T-75 | 75 | 120 | 165 | 160 | 155 | 7.5 | 1440 | 18 |
2T-150 | 175 | 210 | 248 | 240 | 240 | 15 | 1440 | 22 |
2T-200 | 250 | 300 | 340 | 330 | 325 | 20 | 1440 | 33 |
2T-250 | 300 | 400 | 420 | 410 | 390 | 25 | 1440 | 38 |
2T-300 | 400 | 480 | 510 | 500 | 490 | 30 | 1440 | 44 |
2T-400 | 500 | 600 | 665 | 660 | 650 | 40 | 960 | 60 |
2T-500 | 625 | 750 | 830 | 825 | 815 | 50 | 960 | 77 |
2T-700 | 875 | 1050 | 1150 | 1150 | 1135 | 60 | 960 | 85 |
2T-900 | 1100 | 1325 | 1475 | 1480 | 1460 | 75 | 960 | 183 |
These are rotary sliding vane, oil lubricated, belt driven type and find applications in printing, labeling, vacuum forming, filling and sealing machines. Pumps are compact, light weight and can be placed inside original equipment.
UNIQUE FEATURES
| Both ball bearings are located on drive end of the rotor shaft and are housed in one end cover which has foundation holes for fitting on base plate. On removal of six bolts, the other end cover along with the stator comes apart exposing rotor and vanes for servicing. |
| The grease filled bearings are separated from other parts with oil seals thus preventing contact with sucked in media. |
| The oil from exhaust is baffled and re-circulated, thus eliminating oil drops being thrown out from exhaust nozzle. |
| Model LV 150 has a built-in-suction filter an oil re-circulation system which enables the baffled oil to return to oil cup. |
| Both the models are V-belt driven to give following advantages :-Vibration-free running , Displacement variation possible by changing pulley ratio , can be located conveniently inside equipment. SERIES LV FEATURES |
Model | FAD Displacement Liters/Min | Vacuum Hg | Pressure PSI | Motor H. P. |
---|---|---|---|---|
LV-75N | 75 | 28" | 10 | 0.25 |
LV-150N | 150 | 28" | 10 | 0.25 |
LV-300/OEM 300 | 300 | 26" | 10 | 1.0 |
This series of vacuum pumps are rotary sliding vane, oil immersed type. The rotor, stator and end covers are made up of high nickel content cast iron and are machined to very fine tolerance. These pumps are ideal for handling dry and clean air. Gas ballast and belt guard are provided as standard equipment.
FEATURES
Exhaust valve is designed to eliminate "rapping" noise.
Unique construction of the pump totally eliminates the sucking of air through the shaft seal.
Pumps can also be operated with SAE-30 motor oil instead of vacuum oil
Water Cooling Arrangement can be provided if required at extra cost.
OPTIONAL ACCESSORIES (at extra cost)
Non-Return Valve
Moisture Trap
Vacuum Gauge with regulator
SINGLE STAGE
Model | Free Air Displacement (ltrs/min) |
H.P required |
Oil Charged in ltrs |
ISP- 45 | 50 | 0.25 | 2.5 |
ISP- 70 | 75 | 0.5 | 3.0 |
ISP- 100 | 100 | 0.5 | 4.0 |
ISP- 166 | 166 | 0.75 | 4.5 |
ISP- 350 | 350 | 1.0 | 5.5 |
ISP- 500 | 500 | 1.5 | 10 |
ISP- 750 | 750 | 1.5 | 20 |
ISP- 1000 | 1000 | 2 | 20 |
ISP- 1500 | 1500 | 3 | 35 |
ISP- 2000 | 2000 | 3 | 55 |
ISP- 3000 | 3000 | 5 | 55 |
ISP- 5000 | 5000 | 10 | 60 |
ISP- 6000 | 6000 | 10 | 60 |
DOUBLE STAGE
Ultimate Vacuum(on Mcleod Gauge) 0.005 mm Hg. A
Model | Free Air Displacement (ltrs/min) |
H.P required |
Oil Charged in ltrs |
2SP- 45 | 50 | 0.25 | 3.5 |
2SP- 70 | 75 | 0.5 | 4.0 |
2SP- 100 | 100 | 0.5 | 4.5 |
2SP- 166 | 166 | 1 | 5.5 |
2SP- 350 | 350 | 1 | 6.5 |
2SP- 500 | 500 | 2 | 14.5 |
2SP- 750 | 750 | 2 | 24 |
2SP- 1000 | 1000 | 3 | 24 |
2SP- 1500 | 1500 | 5 | 35 |
2SP- 2000 | 2000 | 5 | 60 |
2SP- 3000 | 3000 | 7.5 | 68 |
2SP- 5000 | 5000 | 10 | 75 |
2SP- 6000 | 6000 | 10 | 75 |
Acmevac offer 100% oil-free Diaphragm Vacuum Pumps/Compressors. They can be used either as vacuum pumps or oil-free compressors and are designed for delivery of uncontaminated air, gases or va pours. They are suitable for producing oil-free compressed air or vacuum.
ADVANTAGES:
Diaphragm type - hence no rubbing of parts and negligible wear & tearPractically maintenance free.No lubrication required, hence oil - freeLow operational cost of equipment. This results from the modest cost for replacement of diaphragm and valves.
FEATURES:
Heads are made of aluminum alloy castingsDiaphragms are made of neoprene rubber or other elastomers depending on applicationsSpecially designed motors in single - phase and three-phase constructionsPumps are mounted on rubber pads for silent, vibration-free runningDue to compact design, these pumps are ideal for laboratories and original equipment manufacturersCompact, light-in-weight, hence portable
APPLICATIONS:
Pollution Monitoring Equipment, Chemical Analyzers, Laminating press, Material Handling Equipment, Labeling Machines, Plastic Welding Machines, Gas Welding Machines, Soldering iron, Agitation of Chemicals in Tanks, Aeration.
SPECIFICATIONS :
Model | Free Air Displacement |
Vacuum | Pressure (maximum) |
Motor HP |
Dimensions mm |
SD-15 | 15 litres/min | 22" HG | 25 psi | 1/20 | 175x110x150 |
SD-20 | 20 litres/min | 22" HG | 25 psi | 1/16 | 220x110x150 |
ASD-30 | 40 litres/min | 27" HG | 30 psi | 1/8 | 200x125x200 |
2SD-30 | 30 litres/min | 22" HG | 30 psi | 1/4 | 300x130x200 |
2SD-50 | 50 litres/min | 22" HG | 30 psi | 1/4 | 300x130x200 |
SD-45-FM | 45 litres/min | 22" HG | 30 psi | 1/4 | 400x150x220 |