• Choice of Air circulation: Vertical, horizontal or combination
• Heating Media: Electrical / Diesel / Gas
• Temperature Range: Ambient to 300°C
• Control panel: with Standard Controls
• Convection/Direct/Indirect/Infrared Heating System
• Fully automatic control panel with VFD, Thyristor
• Six access doors for maintenance
• Uniform heating

• Many standard sizes and custom sizes available.
• Gas or electric heat.
• Standard combination airflow pattern.
• Horizontal airflow design also available.
• Rattle proof adjustable ductwork.
• SSR/Thyristor power control on electrically heated curing ovens.
• Convection/Direct/Indirect/Infrared Heating System
• Fully automatic control panel with VFD, Thyristor.
• Less energy consumption (30%), resulting in lower monthly utility bill.
• Vertical sliding door - Design accordingly human safety Space saving door to simplify loading.
• PLC control & remote communications.

• Oven is made to easily withstand up to 250°C to 350°C
• Oven is made for ramp soak profile
• Adopted with cycling wind heating system that keep the inside room of oven in certain uniform temperature, prevent the no uniform heating.
• Fine control and uniformity.
• Good air proofness
• Fine control and proper uniformity

• Uniform heating across entire area of the oven
• Quick & Fast Heating at desired temperature.
• 100% Safety in Operation on all types of heating
• Comparative Less Consumption of Fuel.
• Convection/Direct/Indirect/Infrared Heating System
• Customized sizes designed to meet customers’ requirements
• Gas burner with VPS system.
• Heat exchanger SS304 10guage sheet, SS304 pipes.
• Damper on top of Oven to vent out air with Modulation motor.

UseIt is widely used in electronic components, hardware, electrical industry, daily consumer goods, sensors, auto parts electronics, crafts, precision apparatuses, gifts and ornaments, medical equipments, high-low-voltage appliances, bathroom accessories, battery industry IT industry, etc. Typical Industries -Automobiles , Electronics & Semiconductors , Fond & Beverages, Jewellery, Medical, Machinery, Tool & Tooling.

Features

• Fiber laser with pulsed and CW Operation
• 1, 00, 000 hr. MTTF Tested diode life time
• High speed Making Compatible
• First and last pulse equally usable
• Bitmap marking compatible
• Maintenance free operation
• Maximized peak power over full operational repetition rate
• Automatic pump diode timing control
• Common Specification
• Hardware Requirements
• Intel Dual Core Processor
• Gigabyte Motherboard ]
• 160 GB HOD, 2 GB RAM
• 17" Monitor 8, Keyboard Mouse
• Interface : USB iNTERFACE
• Operating System : Win 7 OS / 32 bit / 64Bit Supported.

• With international high-quality fiber laser, it can mark all sorts of precise patterns according to customer requirements.

• Multiple power laser light source, available for many industries.

• Fast speed, high efficiency, stable output power high reliability.

• Ling life, maintenance-free within 1, 00, 000 hours, operated in 24 x 7 hours working condition.

• High electro-optic conversion efficiency, little energy coupling loss, less power consumption with iust 0.5 kW/hr

• Small and compact siz, easy to carry, save production space.

USE

• lt is widely used in electronic components,
• hardware, electrical industry daily consumer
• goods, sensors, auto parts electronics, crafts,
• precision apparatuses, gifts and ornaments,
• medical equipments, high-low-voltage
• appliances, bathroom accessories, battery
• industry, [T industry etc

'Typical Applications :• Marking• Coding• Processing on the fly• Rotary Marking

Typical Industries :• Automobiles• Electronics & Semiconductors• Food & Beverages• jewellery• Medical• Machinery• Tools and Tooling

Silent Features :

• Oven is made to easily withstand up to 250°C to 350°C
• Oven is made for ramp soak profile
• Adopted with cycling wind heating system that keep the inside room of oven in certain uniform temperature, prevent the no uniform heating.
• Fine control and uniformity.
• Good air proofness
• Fine control and proper uniformity

• Gas burner is used for heating purpose.
• Quick & Fast Heating at desired temperature
• Comparative Less Consumption of Fuel.
• Damper on top of Oven to vent out air with damper cylinders.
• Fully automatic control panel with VFD, TEMP Controller.
• Fully automatic control on doors.
• Fast heating capacity burners, resulting in lower waiting time.
• Vertical sliding door with counterweight highly preferable for human safety.
• Space saving door to simplify loading.

• Very effective for high production rate.
• Cure in uniform rate.
• Convection/Direct/Indirect/Infrared Heating System
• High efficient heat transfer and energy utilization.
• Heats by line of sight.
• High thermal efficiency
• Fine control and proper uniformity
• Aesthetic finishing
• Thermal loss is prevented by filling rock wool (Insulation) in space between the outer body & Inner chamber.
• Customized sizes designed to meet customers’ requirements

• Choice of Air circulation: Vertical, horizontal or combination
• Heating Media: Electrical / Diesel / Gas
• Temperature Range: Ambient to 300°C
• Control panel: with Standard Controls
• Convection/Direct/Indirect/Infrared Heating System
• Fully automatic control panel with VFD, Thyristor
• Six access doors for maintenance
• Uniform heating

• Many standard sizes and custom sizes available.
• Gas or electric heat.
• Standard combination airflow pattern.
• Horizontal airflow design also available.
• Rattle proof adjustable ductwork.
• SSR/Thyristor power control on electrically heated curing ovens.
• Convection/Direct/Indirect/Infrared Heating System
• Fully automatic control panel with VFD, Thyristor.
• Less energy consumption (30%), resulting in lower monthly utility bill.
• Vertical sliding door - Design accordingly human safety Space saving door to simplify loading.
• PLC control & remote communications.

• Oven is made to easily withstand up to 250°C to 350°C
• Oven is made for ramp soak profile
• Adopted with cycling wind heating system that keep the inside room of oven in certain uniform temperature, prevent the no uniform heating.
• Fine control and uniformity.
• Good air proofness
• Fine control and proper uniformity

• Uniform heating across entire area of the oven
• Quick & Fast Heating at desired temperature.
• 100% Safety in Operation on all types of heating
• Comparative Less Consumption of Fuel.
• Convection/Direct/Indirect/Infrared Heating System
• Customized sizes designed to meet customers’ requirements
• Gas burner with VPS system.
• Heat exchanger SS304 10guage sheet, SS304 pipes.
• Damper on top of Oven to vent out air with Modulation motor.

UseIt is widely used in electronic components, hardware, electrical industry, daily consumer goods, sensors, auto parts electronics, crafts, precision apparatuses, gifts and ornaments, medical equipments, high-low-voltage appliances, bathroom accessories, battery industry IT industry, etc. Typical Industries -Automobiles , Electronics & Semiconductors , Fond & Beverages, Jewellery, Medical, Machinery, Tool & Tooling.

Features

• Fiber laser with pulsed and CW Operation
• 1, 00, 000 hr. MTTF Tested diode life time
• High speed Making Compatible
• First and last pulse equally usable
• Bitmap marking compatible
• Maintenance free operation
• Maximized peak power over full operational repetition rate
• Automatic pump diode timing control
• Common Specification
• Hardware Requirements
• Intel Dual Core Processor
• Gigabyte Motherboard ]
• 160 GB HOD, 2 GB RAM
• 17" Monitor 8, Keyboard Mouse
• Interface : USB iNTERFACE
• Operating System : Win 7 OS / 32 bit / 64Bit Supported.

• With international high-quality fiber laser, it can mark all sorts of precise patterns according to customer requirements.

• Multiple power laser light source, available for many industries.

• Fast speed, high efficiency, stable output power high reliability.

• Ling life, maintenance-free within 1, 00, 000 hours, operated in 24 x 7 hours working condition.

• High electro-optic conversion efficiency, little energy coupling loss, less power consumption with iust 0.5 kW/hr

• Small and compact siz, easy to carry, save production space.

USE

• lt is widely used in electronic components,
• hardware, electrical industry daily consumer
• goods, sensors, auto parts electronics, crafts,
• precision apparatuses, gifts and ornaments,
• medical equipments, high-low-voltage
• appliances, bathroom accessories, battery
• industry, [T industry etc

'Typical Applications :• Marking• Coding• Processing on the fly• Rotary Marking

Typical Industries :• Automobiles• Electronics & Semiconductors• Food & Beverages• jewellery• Medical• Machinery• Tools and Tooling

Silent Features :

• Oven is made to easily withstand up to 250°C to 350°C
• Oven is made for ramp soak profile
• Adopted with cycling wind heating system that keep the inside room of oven in certain uniform temperature, prevent the no uniform heating.
• Fine control and uniformity.
• Good air proofness
• Fine control and proper uniformity

• Gas burner is used for heating purpose.
• Quick & Fast Heating at desired temperature
• Comparative Less Consumption of Fuel.
• Damper on top of Oven to vent out air with damper cylinders.
• Fully automatic control panel with VFD, TEMP Controller.
• Fully automatic control on doors.
• Fast heating capacity burners, resulting in lower waiting time.
• Vertical sliding door with counterweight highly preferable for human safety.
• Space saving door to simplify loading.

• Very effective for high production rate.
• Cure in uniform rate.
• Convection/Direct/Indirect/Infrared Heating System
• High efficient heat transfer and energy utilization.
• Heats by line of sight.
• High thermal efficiency
• Fine control and proper uniformity
• Aesthetic finishing
• Thermal loss is prevented by filling rock wool (Insulation) in space between the outer body & Inner chamber.
• Customized sizes designed to meet customers’ requirements