The BKL120-HI marine lantern is a rugged and lightweight, self-contained and autopowered flashing beacon, especially designed for high luminous efficiency, low cost and very low maintenance.
Ideal for installations of up to 7 n.m. Vertical prism lens cover of 120 mm diameter, with internal high-quality precision moulded condenser lens units.
Lantern base is made from high-quality moulded composite plastic, giving an exceptional compact lantern durability and resistance.
This gives low installation and maintenance costs, and an extraordinary long service life in severe marine operating environments.

The BDA155 is a rugged and lightweight marine flashing beacon, especially designed for low powered medium-range shore and sea installations.
High-quality precision moulded Fresnel lens of 155 mm diameter, with composite plastic base are used for exceptional lantern integrity and durability.
This gives a low consumption and an extended service life in severe marine operating environments.

The BGL300 is a high-quality and high-intensity short-focus rotating LED beacon.
It is compact, lightweight and suites to solar or standard DC power supplies.
Providing nominal ranges in excess of 20 n.m., and 31 n.m. for T = 0.85
It a may be used as a medium-range landfall light or to mark headlands, entrances to estuaries ports, hazardous reefs, etc.
It is especially suited where durability and resistance to very adverse and severe marine environment are required.

The DES series are digital microcontroller based flashers, designed to be the most complete and versatile electronic flashers in the market.
They offer an infinite rhythm selection, output voltage regulation and selection, photocell control, synchronisation, and possibility to operate with lampchanger, dual-filament lamps and LED lanterns.

The CLC Series are very versatile automatic lamchangers, suitable for use in rotating beacons. These lampchangers have a capacity for two, three or four lamps; one main and the others standby ones, and they spin in the vertical plane.
In the event of the main lamp burning out or fusing, standby lamps automatically rotate into the focal position. Features Power lamp

The CMB200 Beacon Control Unit is a versatile, multi-function control equipment. It can control all the functions related to the generation of flash rhythms, lamp failure detection and lamp change in most of the lampchangers available in the market, with any type of DC and/or AC lamps and control of rotating beacons type BGC.

The BAM series mooring buoys is designed for mooring big tonnage vessels.
All materials employed are highly resistant to the most severe marine environmental conditions. Metallic parts are structural steel protected with zinc anodes. Emerged parts as well as float acquire their colour for every case, and according to IALA Recommendations. The float is divided into three watertight compartments so as to limit impact damage

A comprehensive range of radar reflectors are designed to enhance the radar conspicuity of buoys and floating aids to navigation and shore-based beacons.
Different types and sizes are manufactured attaining effective echo response of the targets for each application.

These lattice towers have been designed and developed for installation and operation in very remote regions with adverse sea weather conditions, where they have operated successfully over many years.
Suited for solar lighthouses and beacons, with modular tower heights up to 40 m.

The TMP Series towers utilise a pyramidal shaped steel structure which can incorporate a day mark shape in the design.
Particular emphasis is placed On achieving a vandal-proof system of access. Suitable for ports, harbours and marinas.

The TPS series are simple and modular fiberglass reinforced polyester (GRP) towers.
They are designed to be used as small-medium height self-contained beacons, suitable for remote navaids applications. These towers accept the full range of flashing beacons together with their solar power installations.

SPK are autonomous solar power systems, capable of feeding up to 10 n.m. range beacons.
The design of their different configurations make it suitable for feeding both shore and sea installations. Its low installation and maintenance cost makes them suitable even for sites in which electrical commercial lines are available.
Its battery box, which also contains the charge regulator, is made in exceptionally resistant and durable composite. This provides the kit with an extraordinary service life in very adverse marine environments.

The SPC series are ideal for medium and large sized solar photovoltaic systems in remote aids-to-navigation stations.
The SPC control unit provides full protection to the battery and loads against overcharging and over discharging. It also provides a complete interface between the solar array, the battery and the loads (lamp, beacon, motor).
The control unit includes the DINTAH03 dual AH meter & datalogger to obtain complete information about the operational status of the solar power system by means of its LCD display.

The SPC66 / SPC88 are solar charge controllers which contain the most recent and innovative technology, ideal for small and medium size solar power systems and very suitable for marine aids to navigation. In them, the battery charge is through PWM shunt regulator and the overdischarge is controlled with a MOSFET transistor.
Temperature compensation by means of an internal sensor is integrated in these controllers. These features allow them to provide a very efficient charge regulation, providing a high reliability and extending battery life.
The ingress protection (IP-67) of their box allows them to be used in the most adverse marine environment conditions.

Los mdulos fotovoltaicos LMV son fabricados bajo un estricto control con los mejores componentes y materiales.
Las clulas solares de silicio tienen las siguientes ventajas: alta eficacia, alto rendimiento, alta fiabilidad y no contaminan.
Los mdulos solares LMV tienen un excelente rendimiento.
La alta eficiencia de los mdulos solares LMV est particularmente diseada para aplicaciones que necesiten de una mxima generacin de energa.

La Maquinista Valenciana provides a Remote Control and Monitoring System especially designed for the supervision of aids-to-navigation stations including lighthouses, beacons, buoys and generally any equipment in the aids to navigation field.
The system allows the monitoring and control of unlimited remote outstations from one or more base stations.

Designed for the intelligent management of powered and non-powered, fixed and movable assets, SMARTONE is a practical solution to improve operating efficiency and security.
T he Asset Ready design allows it to be easily installed and field managed without the need for harnesses, antennas, or external power. The SMARTONE is powered by 4 off-the-shelf AA 1.5V lithium batteries providing 3+ years of battery life and removes the need to purchase expensive proprietary batteries for replacement.
The SMARTO NE utilizes motion sensors, comparative GPS positions and custom configured sensors to gather and transmit asset status information. Each SMARTO NE is custom configured to track its assets specific needs and provide intermediate and emergency alerts by email and/or text/cellular.

The DES-GSM equipment from LMV are prepared to be connected to our electronic equipments from ultimate generation from the DES series.
Its use allows remote management of these ones as the sending of external alarms.

The DES-GPRS equipment from LMV are prepared to be connected to our flasher series from ultimate generation from the DES series.
Its use allows remote management of these ones as the sending of alarm signals from beacons and its GPS position if its use with the synchronizer and position DES-GPS equipment.
The DES-GPRS module is specially design for its integration with the control/monitoring system from LMV, the SMS sending for alarms to specific numbers being the main function of the DES-GSM.

We are the main supplier of this product.

Luminous range
The luminous range of a light is the maximum distance at which the light can be seen by an observer. It is determined by the luminous intensity of the light and by the atmospheric transmissivity.

Nominal range
The nominal range of a light is its luminous range under atmosphere conditions of T = 0.74, equivalent to a meteorological visibility of 10 n.m

Atmospheric transmission factor
The atmospheric transmission factor (T) indicates the light transmission per nautical mile through the atmosphere, and is a factor characterising the transparency of the atmosphere. This factor is closely related to the meteorological visibility as shown in the table.

Offshore Boom is an air-inflated boom that is well suited to the harsh conditions faced in open ocean spills. Large independent air bladders within individual buoyancy chambers are quickly inflated through Monsun inflation/deflation valves using back-mounted blower packs.
Manufactured from either Urethane-coated or PVC-coated fabrics using RF-Welding technology, Versatechs Offshore boom offers a durable yet economical choice.
Available in a wide range of sizes to fulfill virtually any role from calm inland waters to demanding offshore duty, Offshore Boom stores compactly on Versatechs Boom Storage Reels.

InShore Boom is an economical fence-type boom deployed as prevention boom in high spill risk operations (e.g. ship refuelling, bunker operations) and as a response boom in sheltered waters.
Lightweight with a flat cross-section, the design allows for compact storage on Boom Storage Reels or in deployment containers. InShore Boom is easy to deploy, handle and recover. InShore Boom is manufactured using RF welding technology. Versatech only uses the best quality materials available, and manufactures under strict quality control conditions and procedures. As a custom manufacturer, Versatech offers a range of sizes, fabrics and optional custom features according to the intended use.

River Boom is a high-strength containment boom designed specifically for use in rivers and strong currents.
River Boom's unparalleled strength and performance are a result of Versatech's superior design. International standard connectors are attached to the boom in such a way that load is evenly distributed across the boom without the use of bolts or perforations through the boom fabric. Top and bottom tension members provide tensile strength. Bottom tension / ballast chains are proof tested to ensure tensile strength consistency (batch test certificates are available upon request).
Versatech manufactures River Boom under strict quality control and procedures using high specification materials. All seams are RF welded. A wide range of standard and custom sizes, fabrics and optional features are available to suit the application and environmental conditions.

ShoreSeal Boom is a unique boom design for protecting beaches and low tidal land areas.
With two water-filled lower chambers for ballast and an air-inflated top chamber for buoyancy, ShoreSeal creates a self-supporting barrier onshore connecting to conventional style boom (such as InShore Boom) in deeper water to provide continuous protection in tidal zones.
ShoreSeal is manufactured from the highest quality urethane or PVC coated fabrics. Optional double layer fabric is offered under water chambers to provide additional abrasion resistance. All seams are RF welded for maximum strength and each boom section connects by means of a quick-release Aluminum connector.

PermaGuard Boom is a heavy-duty debris and oil spill containment boom designed for permanent installation at oil handling facilities, harbours, power station and desalination plant inlets.
PermaGuard is designed for long service life with minimum maintenance. PermaGuard floats provide exceptional buoyancy, stability and tow characteristics, as well as a wide cross section providing good roll resistance. PermaGuard boom does not require additional ballast weights. Manufactured from rota-moulded Polyethylene, the foam-filled floats provide excellent impact and abrasion resistance.

The hydraulic power packs are complete from small air cooled portable units for small RBS skimmers to large 4 or 6 cylinder water cooled engines and come with 2 or more hydraulic circuits for the drive and control or brush speed, pump, thrusters and crane. They can be provided with sound attenuation, fire and explosion resistant or Zone II intrinsically safe engines.

Versatechs Hydraulic Boom Reels are known for their high quality and extreme durability. Hydraulic Boom reels make storage and deployment of oil containment boom efficient and easy. The reel has fully welded construction and is made using corrosion resistant 100% 6101 aluminum, and features two forklift pockets for easy transportation. A variety of drive types with high ratio gear reducer provides reliability and the high torque required for deployment and collection of long lengths of boom.
Versatech reels can be driven by skid mounted or stand alone diesel hydraulic power pack, electric hydraulic, direct electric or by manual chain assemblies.
All of Versatechs reels are custom built and designed according to the specifications provided by the customer and length of boom to be stored.

We are the main supplier of this product.

Versatech Oil Spill Response Trailer is a complete package enabling personnel to effectively deal with small to medium land based oil spill situations at a moments notice.

This containment bag is fabricated from high tensile PVC coated polyester fabric, finished with a top coat of polyurethane for greater chemical and mechanical resistance. For greater strength the coated fabric joints are Heat Sealed using radio frequency heat sealing equipment. There is absolutely no glue or sewing used in fabrication.

VersaTank
The VersaTank is easy and quick to assemble. It is ideal for temporary oily water storage at spill sites or for water storage at remote fire fighting sites.
Onion Tank
Versatechs heavy duty collapsible Onion Tank storage tank is capable of storing a wide range of liquids and can be custom built to suit your storage needs.

Versa Pillow Tank storage reservoirs solve liquid storage problems. The tank has been specifically designed to combine portability and versatility with economy. The Versa Pillow Tank is available in a full range of sizes from 100 to 50, 000 USG and larger, if required, for containment of fuel, water, or virtually any liquid.

We are the main supplier of this product.

Versa-Berm Secondary Containment is used for spill containment, the Versa-Berm is easily placed under valves, fittings, trucks, and machinery.
Constructed of durable fabric that is resistant to chemicals, fuels, oils, and acids.
Appropriate containing spills of waste water, petroleum products, and various chemicals.
Compact and lightweight for storage and easy transport.
8 standard sizes and custom sizes available.
Inexpensive
Easily cleaned and maintained.
Optional valve can be installed to drain accumulated rainwater, or connected to a hose to pump out spills

Versatechs VersaFence is a versatile high visibility floating barrier with exceptional longevity, robustness, strength, and stability. This barrier is virtually unsinkable, designed for a variety of wave conditions, and can be used in salt water and direct sunlight for extremely prolonged periods without fear of corrosion or degradation of the floats or connectors. Each float measures 90 cm (36) in diameter and 120 cm (48) long, and features an engineered internal steel axle used to distribute load across the entire barrier system while providing individual connection points. The barrier has 125 mm (5) of draft, 790 mm (31) of freeboard for an overall height of 36, meaning 87% of the barrier is visible at all times, and delivers buoyancy in excess of 1800 lbs.

We are the main supplier of this product.

We are the main supplier of this product.

We are the main supplier of this product.

The BKL120-HI marine lantern is a rugged and lightweight, self-contained and autopowered flashing beacon, especially designed for high luminous efficiency, low cost and very low maintenance.
Ideal for installations of up to 7 n.m. Vertical prism lens cover of 120 mm diameter, with internal high-quality precision moulded condenser lens units.
Lantern base is made from high-quality moulded composite plastic, giving an exceptional compact lantern durability and resistance.
This gives low installation and maintenance costs, and an extraordinary long service life in severe marine operating environments.

The BDA155 is a rugged and lightweight marine flashing beacon, especially designed for low powered medium-range shore and sea installations.
High-quality precision moulded Fresnel lens of 155 mm diameter, with composite plastic base are used for exceptional lantern integrity and durability.
This gives a low consumption and an extended service life in severe marine operating environments.

The BGL300 is a high-quality and high-intensity short-focus rotating LED beacon.
It is compact, lightweight and suites to solar or standard DC power supplies.
Providing nominal ranges in excess of 20 n.m., and 31 n.m. for T = 0.85
It a may be used as a medium-range landfall light or to mark headlands, entrances to estuaries ports, hazardous reefs, etc.
It is especially suited where durability and resistance to very adverse and severe marine environment are required.

The DES series are digital microcontroller based flashers, designed to be the most complete and versatile electronic flashers in the market.
They offer an infinite rhythm selection, output voltage regulation and selection, photocell control, synchronisation, and possibility to operate with lampchanger, dual-filament lamps and LED lanterns.

The CLC Series are very versatile automatic lamchangers, suitable for use in rotating beacons. These lampchangers have a capacity for two, three or four lamps; one main and the others standby ones, and they spin in the vertical plane.
In the event of the main lamp burning out or fusing, standby lamps automatically rotate into the focal position. Features Power lamp

The CMB200 Beacon Control Unit is a versatile, multi-function control equipment. It can control all the functions related to the generation of flash rhythms, lamp failure detection and lamp change in most of the lampchangers available in the market, with any type of DC and/or AC lamps and control of rotating beacons type BGC.

The BAM series mooring buoys is designed for mooring big tonnage vessels.
All materials employed are highly resistant to the most severe marine environmental conditions. Metallic parts are structural steel protected with zinc anodes. Emerged parts as well as float acquire their colour for every case, and according to IALA Recommendations. The float is divided into three watertight compartments so as to limit impact damage

A comprehensive range of radar reflectors are designed to enhance the radar conspicuity of buoys and floating aids to navigation and shore-based beacons.
Different types and sizes are manufactured attaining effective echo response of the targets for each application.

These lattice towers have been designed and developed for installation and operation in very remote regions with adverse sea weather conditions, where they have operated successfully over many years.
Suited for solar lighthouses and beacons, with modular tower heights up to 40 m.

The TMP Series towers utilise a pyramidal shaped steel structure which can incorporate a day mark shape in the design.
Particular emphasis is placed On achieving a vandal-proof system of access. Suitable for ports, harbours and marinas.

The TPS series are simple and modular fiberglass reinforced polyester (GRP) towers.
They are designed to be used as small-medium height self-contained beacons, suitable for remote navaids applications. These towers accept the full range of flashing beacons together with their solar power installations.

SPK are autonomous solar power systems, capable of feeding up to 10 n.m. range beacons.
The design of their different configurations make it suitable for feeding both shore and sea installations. Its low installation and maintenance cost makes them suitable even for sites in which electrical commercial lines are available.
Its battery box, which also contains the charge regulator, is made in exceptionally resistant and durable composite. This provides the kit with an extraordinary service life in very adverse marine environments.

The SPC series are ideal for medium and large sized solar photovoltaic systems in remote aids-to-navigation stations.
The SPC control unit provides full protection to the battery and loads against overcharging and over discharging. It also provides a complete interface between the solar array, the battery and the loads (lamp, beacon, motor).
The control unit includes the DINTAH03 dual AH meter & datalogger to obtain complete information about the operational status of the solar power system by means of its LCD display.

The SPC66 / SPC88 are solar charge controllers which contain the most recent and innovative technology, ideal for small and medium size solar power systems and very suitable for marine aids to navigation. In them, the battery charge is through PWM shunt regulator and the overdischarge is controlled with a MOSFET transistor.
Temperature compensation by means of an internal sensor is integrated in these controllers. These features allow them to provide a very efficient charge regulation, providing a high reliability and extending battery life.
The ingress protection (IP-67) of their box allows them to be used in the most adverse marine environment conditions.

Los mdulos fotovoltaicos LMV son fabricados bajo un estricto control con los mejores componentes y materiales.
Las clulas solares de silicio tienen las siguientes ventajas: alta eficacia, alto rendimiento, alta fiabilidad y no contaminan.
Los mdulos solares LMV tienen un excelente rendimiento.
La alta eficiencia de los mdulos solares LMV est particularmente diseada para aplicaciones que necesiten de una mxima generacin de energa.

La Maquinista Valenciana provides a Remote Control and Monitoring System especially designed for the supervision of aids-to-navigation stations including lighthouses, beacons, buoys and generally any equipment in the aids to navigation field.
The system allows the monitoring and control of unlimited remote outstations from one or more base stations.

Designed for the intelligent management of powered and non-powered, fixed and movable assets, SMARTONE is a practical solution to improve operating efficiency and security.
T he Asset Ready design allows it to be easily installed and field managed without the need for harnesses, antennas, or external power. The SMARTONE is powered by 4 off-the-shelf AA 1.5V lithium batteries providing 3+ years of battery life and removes the need to purchase expensive proprietary batteries for replacement.
The SMARTO NE utilizes motion sensors, comparative GPS positions and custom configured sensors to gather and transmit asset status information. Each SMARTO NE is custom configured to track its assets specific needs and provide intermediate and emergency alerts by email and/or text/cellular.

The DES-GSM equipment from LMV are prepared to be connected to our electronic equipments from ultimate generation from the DES series.
Its use allows remote management of these ones as the sending of external alarms.

The DES-GPRS equipment from LMV are prepared to be connected to our flasher series from ultimate generation from the DES series.
Its use allows remote management of these ones as the sending of alarm signals from beacons and its GPS position if its use with the synchronizer and position DES-GPS equipment.
The DES-GPRS module is specially design for its integration with the control/monitoring system from LMV, the SMS sending for alarms to specific numbers being the main function of the DES-GSM.

We are the main supplier of this product.

Luminous range
The luminous range of a light is the maximum distance at which the light can be seen by an observer. It is determined by the luminous intensity of the light and by the atmospheric transmissivity.

Nominal range
The nominal range of a light is its luminous range under atmosphere conditions of T = 0.74, equivalent to a meteorological visibility of 10 n.m

Atmospheric transmission factor
The atmospheric transmission factor (T) indicates the light transmission per nautical mile through the atmosphere, and is a factor characterising the transparency of the atmosphere. This factor is closely related to the meteorological visibility as shown in the table.

Offshore Boom is an air-inflated boom that is well suited to the harsh conditions faced in open ocean spills. Large independent air bladders within individual buoyancy chambers are quickly inflated through Monsun inflation/deflation valves using back-mounted blower packs.
Manufactured from either Urethane-coated or PVC-coated fabrics using RF-Welding technology, Versatechs Offshore boom offers a durable yet economical choice.
Available in a wide range of sizes to fulfill virtually any role from calm inland waters to demanding offshore duty, Offshore Boom stores compactly on Versatechs Boom Storage Reels.

InShore Boom is an economical fence-type boom deployed as prevention boom in high spill risk operations (e.g. ship refuelling, bunker operations) and as a response boom in sheltered waters.
Lightweight with a flat cross-section, the design allows for compact storage on Boom Storage Reels or in deployment containers. InShore Boom is easy to deploy, handle and recover. InShore Boom is manufactured using RF welding technology. Versatech only uses the best quality materials available, and manufactures under strict quality control conditions and procedures. As a custom manufacturer, Versatech offers a range of sizes, fabrics and optional custom features according to the intended use.

River Boom is a high-strength containment boom designed specifically for use in rivers and strong currents.
River Boom's unparalleled strength and performance are a result of Versatech's superior design. International standard connectors are attached to the boom in such a way that load is evenly distributed across the boom without the use of bolts or perforations through the boom fabric. Top and bottom tension members provide tensile strength. Bottom tension / ballast chains are proof tested to ensure tensile strength consistency (batch test certificates are available upon request).
Versatech manufactures River Boom under strict quality control and procedures using high specification materials. All seams are RF welded. A wide range of standard and custom sizes, fabrics and optional features are available to suit the application and environmental conditions.

ShoreSeal Boom is a unique boom design for protecting beaches and low tidal land areas.
With two water-filled lower chambers for ballast and an air-inflated top chamber for buoyancy, ShoreSeal creates a self-supporting barrier onshore connecting to conventional style boom (such as InShore Boom) in deeper water to provide continuous protection in tidal zones.
ShoreSeal is manufactured from the highest quality urethane or PVC coated fabrics. Optional double layer fabric is offered under water chambers to provide additional abrasion resistance. All seams are RF welded for maximum strength and each boom section connects by means of a quick-release Aluminum connector.

PermaGuard Boom is a heavy-duty debris and oil spill containment boom designed for permanent installation at oil handling facilities, harbours, power station and desalination plant inlets.
PermaGuard is designed for long service life with minimum maintenance. PermaGuard floats provide exceptional buoyancy, stability and tow characteristics, as well as a wide cross section providing good roll resistance. PermaGuard boom does not require additional ballast weights. Manufactured from rota-moulded Polyethylene, the foam-filled floats provide excellent impact and abrasion resistance.

The hydraulic power packs are complete from small air cooled portable units for small RBS skimmers to large 4 or 6 cylinder water cooled engines and come with 2 or more hydraulic circuits for the drive and control or brush speed, pump, thrusters and crane. They can be provided with sound attenuation, fire and explosion resistant or Zone II intrinsically safe engines.

Versatechs Hydraulic Boom Reels are known for their high quality and extreme durability. Hydraulic Boom reels make storage and deployment of oil containment boom efficient and easy. The reel has fully welded construction and is made using corrosion resistant 100% 6101 aluminum, and features two forklift pockets for easy transportation. A variety of drive types with high ratio gear reducer provides reliability and the high torque required for deployment and collection of long lengths of boom.
Versatech reels can be driven by skid mounted or stand alone diesel hydraulic power pack, electric hydraulic, direct electric or by manual chain assemblies.
All of Versatechs reels are custom built and designed according to the specifications provided by the customer and length of boom to be stored.

We are the main supplier of this product.

Versatech Oil Spill Response Trailer is a complete package enabling personnel to effectively deal with small to medium land based oil spill situations at a moments notice.

This containment bag is fabricated from high tensile PVC coated polyester fabric, finished with a top coat of polyurethane for greater chemical and mechanical resistance. For greater strength the coated fabric joints are Heat Sealed using radio frequency heat sealing equipment. There is absolutely no glue or sewing used in fabrication.

VersaTank
The VersaTank is easy and quick to assemble. It is ideal for temporary oily water storage at spill sites or for water storage at remote fire fighting sites.
Onion Tank
Versatechs heavy duty collapsible Onion Tank storage tank is capable of storing a wide range of liquids and can be custom built to suit your storage needs.

Versa Pillow Tank storage reservoirs solve liquid storage problems. The tank has been specifically designed to combine portability and versatility with economy. The Versa Pillow Tank is available in a full range of sizes from 100 to 50, 000 USG and larger, if required, for containment of fuel, water, or virtually any liquid.

We are the main supplier of this product.

Versa-Berm Secondary Containment is used for spill containment, the Versa-Berm is easily placed under valves, fittings, trucks, and machinery.
Constructed of durable fabric that is resistant to chemicals, fuels, oils, and acids.
Appropriate containing spills of waste water, petroleum products, and various chemicals.
Compact and lightweight for storage and easy transport.
8 standard sizes and custom sizes available.
Inexpensive
Easily cleaned and maintained.
Optional valve can be installed to drain accumulated rainwater, or connected to a hose to pump out spills

Versatechs VersaFence is a versatile high visibility floating barrier with exceptional longevity, robustness, strength, and stability. This barrier is virtually unsinkable, designed for a variety of wave conditions, and can be used in salt water and direct sunlight for extremely prolonged periods without fear of corrosion or degradation of the floats or connectors. Each float measures 90 cm (36) in diameter and 120 cm (48) long, and features an engineered internal steel axle used to distribute load across the entire barrier system while providing individual connection points. The barrier has 125 mm (5) of draft, 790 mm (31) of freeboard for an overall height of 36, meaning 87% of the barrier is visible at all times, and delivers buoyancy in excess of 1800 lbs.

We are the main supplier of this product.

We are the main supplier of this product.

We are the main supplier of this product.