M.B AUTOMATION

Silvassa, Dadra & Nagar Haveli

Our Power Distribution Panel are using in applications like power-distribution, control, ground-fault protection and monitoring. Apart from this, Power Distribution Panel also serves as alarm panel for freeze protection, broad temperature-maintenance and heat-tracing applications. These Power Distribution Panels are integrated with ground-fault circuit breakers in an enclosure having assembled circuit-breaker panel board with or without alarms contacts.

Busbar trunking systems consist of insulated copper or aluminium busbars enclosed in a trunking. Modern busbar trunking is modular in design and is supplied in pre-fabricated lengths and available in a range of conductor configurations. The busbar trunking system product range typically includes elbows, T-connectors, feeder units, panel flanges and various other standard or custom components that make it simple to configure for almost any application. Busbar trunking can effectively conduct substantial currents of electricity, making it a far more effective alternative than standard wiring.

AC drive panels which are widely used as speed controllers of alternate current induction motor. Widely used across various industries, AC drives are used to control the speed of motor by controlling frequency of supply. In AC drives, frequency and voltage are changed in same proportion for smooth performance of ac motor.

Power Distribution Board is used for electrical Power Distribution. In this ACB, MCCB, SDF, MCB etc are the main equipments. This receives supply from PCC. Power Distribution Board offers Isolation and Short Circuit as basic protections. Other Protections like over current, Earth Fault, Earth Leakage etc are offered on case to case basis. Designing needs cable entry, access, site conditions, place of placement etc. information.

Power Control Center Panels for Various industrial applications to provide reliable and effective Distribution service. PCC Panels are the most essential part of electrical system of an industry from where the power of the industry is controlled.

MCC is a group of starter panels for a process plant of various drives (Motor Control Centre). The starter panel controls only one consumer. Multiple groups of starter panel are connected in one Bus called MCC. MCC Panel has capability to start by DCS or in Remote or by automation. The MCC Panel can be availed from us at competitive prices.

HT Panel is a high tension panel through which all machines get supply all the way through UG cables. It is highly preferred by our valuable clients of all across the globe due to its long lasting life, easy operation and power consumption features.

An Automatic Power Factor Correction (Controller) panel known as APFC panel is used to Save Energy by consistently maintaining higher power factor. Low Power Factor leads to poor power efficiency, thereby increasing the apparent power drawn from the distribution network. This result in overloading of distribution devices within the Industry. Our APFC Panels are a modern Powerful System constituting a Technological Breakthrough in the field of Power Factor Control. Our Automatic Power Factor Correction Panel is ready to connect, for the central compensation of reactive power in three-phase Supply Systems for Steel Rolling Mills, Cement Plants, Engg. Industries, Commercial Buildings etc.

Our robustly constructed Automatic Mains Failure (AMF Panels) find wide applications in sectors like foundries, apartments, textiles and other varied industries. These panels come with various functions and timers, which help in the efficient running of the AMF panels. These also have metering facilities for monitoring of the frequency/current/ voltage. We are an AMF Panel supplier in Delhi who also produce customized panels as per the requirement of the clients throughout India. AMF panels are quite useful for automatic changeover from mains to stand-by generator at the time of power failure. We are AMF Panel manufacturers who use quality raw material to manufacture products that are highly durable, rust free, dust and vermin proof.

M.B. Automation are manufacturers of Fire Control Panels in India. Its is designed as per fire security requirements in various industry.

We are manufacturing PCC Extension Panels. The power supply received from transformers, D.G.sets or any other source is fed to the main incomer of this PCC & then it is distributed to the desired laod with the help of ACB, MCCB, SDF, MCB, Fuses etc

Busbar trunking systems consist of insulated copper or aluminium busbars enclosed in a trunking. Modern busbar trunking is modular in design and is supplied in pre-fabricated lengths and available in a range of conductor configurations. The busbar trunking system product range typically includes elbows, T-connectors, feeder units, panel flanges and various other standard or custom components that make it simple to configure for almost any application. Busbar trunking can effectively conduct substantial currents of electricity, making it a far more effective alternative than standard wiring.

Control Desk are manufactured depending upon the space and functionality requirement.

M.B. Automation are the manufacturers and exporters of Fully equipped Package Substation in India.

Technical Details

Rated Voltage: 12kV & 24 kV
FEATURES- Self contained package substation- All the equipment packed in a separate compartment- All compartments are individually accessible- Individual Door Operated lamp for illumination purpose

BENEFITS- Complete weather Proof solution- Ready to position solution- Four lifting eyes for ease of lifting- Minimum site work

Enclosure outdoorEnclosure outdoor body is made of Galvanised sheet steel in corrugated type design for proper heat dissipation.The enclosure is painted with epoxy based powder paint (colour-RAL 7032) suitable for outdoor installations.The compartments are provided with separate doors and pad locking arrangements.Each compartment is fitted with door operated lamp for illumination purpose.For safety purpose, the transformer compartment doors are fitted with arc reflectors.

Medium Voltage (MV) switchgearThe Medium Voltage (MV) switchgear compartment is equipped with C&S make SF6 insulated Ring Main Unit.The GC is equipped with SF6 insulated sealed tank, Switch disconnectors and Vacuum circuit breakers.The ring main unit is designed and tested for internal Arc as per IEC 62271-200.The product conforms to IEC62271-1, IEC 62271-100, IEC 62271-103 and IEC 622271-200.
Distribution transformerThe distribution transformer is equipped with professionally designed ventilation openings for air flow to keep transformer cool.The compartment is provided with a pressure relief system integrated in the ceiling. An optional floor mesh is also provided to restrict the entry of small animals and other foreign objects.The compartment can accommodate both Oil immersed and Dry type transformers.The product conforms to IEC 2026 and IS 11171.

M.B. Automation are the manufacturers and exporters of Enclosure systems manufacturers exporters in india in India. Steel and MS Steel Cabinets and Racks for all your wall mounted and floor standing requirements.

M.B. Automation believe that the best way to design the perfect product is to work closely with our customers. We offer one of the most comprehensive ranges of industrial enclosures and accessories for Automation and Control applications, Heating Ventilation and Air-conditioning (HVAC) and Power and Distribution systems. We have enclosures in mild steel, stainless steel, aluminum and plastic to meet most requirements.

- Typical applications: heating, ventilation, air conditioning OEMs, small control systems, distribution solutions.- One-piece body for optimum rigidity and maximum IP.- Multi-purpose: mounting plate, 19 inch profiles, swing frame, modular system.- Easy-to-work-with.- Large useful mounting space.- Easy equipment positioning.- Factory customisation.- Approvals and certifications.

We are here to help you with enclosure solutions at the right price and quality for control and power applications.

Whatever your enclosure need, you will benefit from our multiple wall-mounted, floor standing and console solutions available in a variety of materials, including mild or stainless steel, and aluminium, fibreglass-reinforced polycarbonate, GRP, ABS and polyester.
Our full range of accessories include fixing systems, thermal management, multiple shelving and door configurations, baying, hinging, smart cable management as well as a host of general purpose devices including lights, door switches, power sockets, signal towers, din rails, cage nuts and screws.
We can modify our standard enclosures to incorporate custom hole patterns and different colours and dimensions, or any other modification, to make it easy for you to utilise our standard enclosures in your own machine design.

An Automatic Power Factor Correction (Controller) panel known as APFC panel is used to Save Energy by consistently maintaining higher power factor. Low Power Factor leads to poor power efficiency, thereby increasing the apparent power drawn from the distribution network. This result in overloading of distribution devices within the Industry. Our APFC Panels are a modern Powerful System constituting a Technological Breakthrough in the field of Power Factor Control. Our Automatic Power Factor Correction Panel is ready to connect, for the central compensation of reactive power in three-phase Supply Systems for Steel Rolling Mills, Cement Plants, Engg. Industries, Commercial Buildings etc.