Lumen Automation Private Limited

Bamheta, Ghaziabad, Uttar Pradesh

Save Time! Save efforts! 

Increases productivity! Werner Electric wireless crane controllers facilitate operators to control the operation of highly complex or simple industrial cranes, saving both time and efforts, increasing productivity and safety with remarkable cost-effectiveness 

Unmatched Reliability! 

Werner Electric wireless controls are designed and tested against dust, water, oil, acids, alkaline, heat and sunlight. No matter, where the crane is deployed, hassle free operation is assured. 

Unmatched flexibility! 

Werner receiver's plug in interface design provides easy and quick Installation and extremely effective when installed on existing cranes, thus minimizing the downtime 

Ease of Use, Extra Long Battery Life! 

Our remote's are manufactured keeping in mind of the typical industrial operations, small form factor, Easy handling with hand gloves and extra long life with 2 'AA' battery provides 150 hours of continuous operation. 

Features Overview 

• Sleek modules for space constraints 
• Universal input voltage 90 V to 300V AC 
• Mountable on 35 mm DIN rail or direct mounting 
• Available range of out-puts 5V, 12V, 24V, 48V DC 
• Wide out-put wattage range from 10 watts to 1500 watts 

Highlights 

• Power supply modules have rich functions and variations 
• Built in over-load and short circuit protections available in modules 
• These rnodules are with high efficiency, performance and reliability 

WERNER'S 65 series power supply module is an innovative module with half the size of the other manufacturers. This is a flagship general purpose unit type power supplies with harmonic attenuator, high efficiency, compact body, rich functions and variations. Werner's power supply modules are the highest quality in the market and offer the ultimate in performance and reliability. 

Whilst traditional Softstarters handle the most common start challenges, Emotron MSF 2.0 offers a lot more. Start and stop sequences are optimized. Advanced braking techniques increase productivity. Builtin monitor functionality protects your process from inefciency, damage and downtime. Easy installation and set-up save time and money.

Key Features:

• Torque control provides linear acceleration and deceleration.
• Minimizes impact on equipment and eliminates need for motor controlled valves.
• Built-in vector brake offers quick and safe braking of screens. No need for mechanical brakes.
• Built-in shaft power monitor sends warning or stops the pump when load is outside yourchosen limits.
• Smart stops with built in braking functionality.
• Analog sensor can be connected directly to MSF to control start and stop levels.
• MSFtorque controls minimizes start currents.

WERNER'S 650 series single output din-rail power supply module is an innovative module with half the size of the other manufacturers. This is a flagship general purpose unit type power supplies with harmonic attenuator, high efficiency, compact body, rich functions and variations. Werner's power supply modules are the highest quality in the market and offer the ultimate in performance and reliability. 

Features Overview 

• Sleek modules for space constraints 
• Single output 15W, 96W & 240W 
• Mountable on 35 mm DIN rail or direct mounting 

Our interface modules fulfill the most varied tasks. Whether in production engineering, for the electrical equipping of machines or in control engineering for power distribution, building automation and materials processing - the main aim is to guarantee the exchange of signals between the process peripherals and the higher level control systems. WERNER Relay Modules provide high density packaging of miniature general purpose relays, Double Pole Double Throw (2 FormC) contact configurations and low current AC and DC coils. Contact us for AB, Siemens, Schneider, Yokogawa, Emerson, Honeywell, Mitsubishi, Omron and other PLC interface modules and prefab cables. "More than 200 types of Interface modules available" 

WERNER`s 23 Series General Purpose & Power Relays represent the most complete line of state-of-the-art high performance electrical switches, designed and manufactured to highest international industry standards. Mechanical lifetimes of up to 10 Million operations and electrical durability of up to 250.000 switching cycles under full load make WERNER Relays your best choice of all.

Features Overview

• All fixed contacts powered by WERNER AFT (Anti-Fuse-Technology)
• All models design for heavy duty or even vibrating environments
• Up to 7 types of operation status indication available
• Most models available in DPDT, 3PDT as well as 4DPT
• All Power Relays Series provide massive silver blade or pin contacts

Emotron VSR Series Drives offer reliable, cost-efficient and user friendly operation. The Emotron VSR series has been specially developed for solar water pumping. Buitin self adaptive high accuracy maximum power point tracking (MPPT) algorithm of VSR ensures maximum water flow output. The compatibility of VSR with AC as well as DC input gives user the flexibility to optimize the operation and improve reliability of operation.

Key Features:

• Dual input supply AC or DC.
• Built-in MPPT algorithm.
• Enter to sleep mode automatically at weak light and exit DC when intensity of light is strong.
• High water level dormant state.
• Under load prea warning.
• Support PMSM and Induction Motor.

WERNER`s 21 Series General Purpose & Power Relays represent the most complete line of state-of-the-art high performance electrical switches, designed and manufactured to highest international industry standards. Mechanical lifetimes of up to 10 Million operations and electrical durability of up to 250.000 switching cycles under full load make WERNER Relays your best choice of all.

Features Overview

• All models designed applying MFMS design principles (Max Function Min Space)
• Most models available in DPDT, 3PDT as well as 4DPT
• Up to 7 types of operation status indication available
• All models available for use with 50 Hz and 60 Hz cycles
• All Power Relay Series are equipped with mechanical operation status indicator

WERNER`s 22 Series General Purpose & Power Relays represent the most complete line of state-of-the-art high performance electrical switches, designed and manufactured to highest international industry standards. Mechanical lifetimes of up to 10 Million operations and electrical durability of up to 250.000 switching cycles under full load make WERNER Relays your best choice of all.

Features Overview

• Compact housing only 12.7mm wide
• Non-polarized LED indicator
• Excellent electrical and mechanical life
• Provided with nameplate
• Environmental friendly, RoHS directive compliant

Diode type:

• Diode reverse withstand voltage: 1000V
• High switching power (1-pole: 12 A)

VVERNERS 770 series Spring-Up Screw terminal blocks are with an innovative edge mountable on standard 35mm DIN rail, except for 30 Amps blo. whi. sits on 15 mm Din rail saving huge space in the panel. 

Features Overview 

Standard 

• Mount on a standard 35mm DIN rail 
• Flame and shock resistance 
• Variety of fuse blocks 
• Marking strips and du. covers 
• One-piece construction 

Spring Lift 

• Mount on 35mm standard DIN rail 
• Touch-down terminals with spring-loaded captive screws 
• Fuse block with or without fuse indicator in LED or Neon. 
• Up to 30A Jumper models 

WERNER`s 24 Series Ultra Slim Relays embody the latest in compact relay design technology you can buy anywhere on the world market. Only a selected few of the world`s top brand switchgear suppliers are even able to produce this kind of high performance fully sealed type of relays. With this product line WERNER sets once again the marks in terms of advanced product design, top features and availability.

Features Overview

• All models designed applying solid modeling and finite elements design methods
• All models available for use with 50 Hz and 60 Hz cycles
• All models design for heavy duty or even vibrating environments
• Featuring only 5mm width of both relay and socket

WERNER'S 48 series general purpose limit switches have a sturdy construction comparable to any limit switch. It uses a zinc die-cast body, a glass-weave reinforced plastic head, and a cover. The terminal cover also boasts excellent dust-proof and drip-proof capabilities. 

Features Overview 

• Sturdy construction comparable to any limit switch. 
• Provides excellent dust-proof and drip-proof capabilities. 
• Aluminum die-cast body, glass-weave reinforced plastic head & cover. 

WERNER`s 31 Series Stack Lights provide the a highest quality combined with usability and flexibility in use in the industry. The unique and stylish elliptical body and lens shape guarantees best visibility from any angle. A vast variation of alu die-cast bases ensure to enable you mount them everywhere you need.

Features Overview

• 5 unique ways of mounting on heavy duty die cast aluminum bases
• Mounting is easy and flexible for maximum visibility
• Available in 12V + 24V(AC&DC), 120V + 240V(AC)
• Standard equipped with integrated buzzer module
• Basic housing available in stylish black
• Enhanced 360° visibility and attention attraction by industry unique oval lens shape
• Available in six lens colors ( red, amber, yellow, green, blue & white)
• Highest visibility by use of High-Bright Multi Chip LED`S only
• New flashing LED modules available for maximum attention
• Custom arrangement of the LED`S is easily possible

WERNER's 30 Series Annunciator Windows are the solution of choice if it is your task to fit of large number of process indicators into limited panel space. Using our 30 Series products will provide you with perfect process clarity in the daily operation of your panels with a very space and cost saving solution. 

Features Overview 

• Integrated 3-phase flasher circuits when used with our 68 Series Logic Controllers 
• Integrated buzzer amplifier circuits when used with our 68 Series Logic Controllers 
• Standard fitted with high bright filament lamps in AC or DC 6V, 12V & 24V 
• Available in 6 Colors as per IEC Standards for different alarm conditions 
• High-Bright multi color display technology 
• Design based on 30mm raster elements 

WERNER`s 26 Series PC Board Relays are the product of your choice if your designs require SPDT or even DPDT abilities but board space and available heights in your casings is very limited. Like our 24 Series, the 25 Series products are fully sealed for use in harsh surroundings, whilst the 26 series products are not sealed but therefore your right choice when purchase price is the major issue.

Features Overview

• All models available for direct PC Board Mounting, PCB socket or Panel socket mounting
• All models designed applying MFMS design principles (Max Function Min Space)
• 26 Series available as SPDT, DPDT, SPST-NO as well as DPST-NO
• All models available for use with 50 Hz and 60 Hz cycles
• 26 Series unsealed but cheaper by providing a heights of only 25mm

WERNERS 46 Series Foot Switches are Rigorous and tough. Made up of strong aluminum housing with non-skid pedal offering a wide variety of switching combinations with unmatched safety.

Features Overview

• Ideal for press, punching, bending & sheet steel processing machines
• Stroke limitations in the switches avoid mechanical overloading
• Pedal protection with key Emergency off
• Ideal for press, punching, bending & sheet steel processing machines
• Protects safely against dust and humidity (protection degree IP65)
• Available in two colors red and yellow
• Made of Strong aluminum housing with non-skid pedal
• Available pedal protection with 400 mm / 600 mm carrying rod
• Modular contact blocks inside allow various contact possibilities
• Options for top or complete protection against unintentional actuation
• Oil & chemical-resistant rubber membrane protects against dust & humidity

Emotron EmoLog Series is a high performance compact type Programmable Logic Controller (PLC) for your automation process. It can be widely applied in manufacturing industries including SPM, textile, chemical fiber, machine tool, cables, food and beverages, packaging, plastic steel, construction machinery, air conditioner, elevator printing and many more. 

Unique Features 

• STM32 high-performance MCU platform 
• Available 14 & 241/0s CPUs with transistor & relay configuration 
• Built in 2 high speed digital inputs max. 200kHz frequency 
• Built in pulse output type PWM/PTO 
• Built-in RS422/RS485 communication port 
• Program memory up to 128Kb 
• Supports 64k-step ladder 
• Built - in real time clock 
• Operating temperature 55°C 

Benefits 

• Configure upto 256 I/O points. 
• Support ladder and instruction list programming. 
• Support optional board up to 2 no's (for Al/AO, Ethernet Port). 
• Compatible for N:N protocol and RS48 communication port, you can create a network of up to 8 CPU. 
• Reliable and stable high speed micro USB port for programming download/monitor. 
• User friendly programming software. 

Emotron Active Front End Drives will save costs and improve reliability in your process. They are available in two versions: Low Harmonic Drives and Regenerative Drives. Both are based on standard Emotron AC Drives, providing the same benefits in reliability, easy handling and advanced functionality, as well a wide range of options. Emotron AFE units are delivered as complete solutions in IP54 classified cabinets. Setup is easy thanks to plug-and-play functionality to the mains supply. 

Key Features: 

• Trouble free operation. 
• Extremely low harmonic distortion, less than 5%. 
• Unity power factor. 
• Regenerative braking. 
• Reactive power compensation. 
• Built-in semiconductor fuse. 

Emotron EmoSmart Series HMI is based on a modern, powerful & user friendly design having high quality display resolution, large memory and a powerful configuration that can easily achieve the human-machine interaction in various fields and industrial automation.

Unique Features 

• Higher computing performance with high speed processor 
• High resolution and high contrast with reliable touch panel 
• The built-in stereo amplifying speaker provides efficient alarm notification 

Benefits : 

• Mechanism design breakthrough. The front panel has acquired the IP. waterproof certificate & back panel is IP20. 
• ABS Black/Gray enclosure for greater vibration resistance and higher tolerance for ambient environment compared with other enclosures. 
• This system allows users to assign authority levels & register passwords to set permissions for different user groups for security control. 

Peripheral Interfaces : 

• Support SD card. 
• Supports USB host 2.0 ports & USB client 2.0 ports 
• Buitt-in communication ports RS232/422/485. 
• Built-in ethernet ports in 7 inch. 

Emotron M20 Shaft Power Monitor helps you save time and money. It protects your pumps and other equipment against damage and detects process inefficiency. Early warnings allow you to take preventive action. Unique features include measuring shaft power output and using the motor as a sensor. The result is reduced maintenance and installation costs, extended equipment lifetime and increased reliability. 

Key Features: 

• Detects over and under load, sends warning or stops the pump. 
• Uses pump motor as sensor, eliminates need for external sensors. 
• No moving parts increases reliability. 
• Shuts pump off before it runs dry. 

CG Emotron new VSE Dedicated Elevator Drives is a reliable choice for elevator OEMs and end users for new and modernization of older elevators. The drive works effortlessly and smoothly with all elevator types and includes excellent tuning features for the safest, most efficient and most comfortable passenger experience without vibration and jerks. VSE features includes safety and reliability, UPS applicable, dedicated brake control sequence and commendable leveling .

Key Features

• I/O's-3AI, 2AO, 7D1, 2DO, 2RO
• Safety and reliability UPS applicable.
• Dedicated brake control sequence.
• Commendable levelling.
• Silky smoothness
• Emergency and inspection sped programmable.
• Quick commissioning.
• Built—in dynamic braking unit for all models.
• Light load detection feature.
• Built in baseblock feature.

Emotron TSA Softstarters take motor control to a new level. Soft torque starting, intelligent load monitoring bypass contactor and smart stops are all included and accompanied by a robust and compact design.

Key Features:

• integrated bypass with proven contactortechnology.
• 3—phase torque control.
• Controlled starts, also with challenging loads.
• Smart stops with built in braking functionality.
• Slow speed and jog operation.
• Extended protection with thermal model.
• Compact dimension.
• Multi lingual control panel with singefunction keys and copy Supply function.
• High capacity dynamics vector brake.
• Coated boards as standard.
• Programmable logical and timer functions with real time clock.
• Motor load monitoring with auto—set of alarm levels.